/arg/ AR15 Rifle General

>no peq
>no light
>finished

You're a year too late.

Here’s my reddit build
Oh hahahaa not for long.
My ar
17-7 ss flat wire spring
7 ounce buffer Jerry rugged lead shot and glue
Binary trigger
80 dollar aim point clone
Pistol brace
Yhm barrel
Side charging upper mid west something
C products ss magazines because polymer is garbage
Moly grease, wd40 specialist corrosion inhibitor, hexagonal boron nitride as lubricant
Dolos gen 2 quick detach barrel system
Chink shit irons
Cut the quad rail to be able to use a soda can launcher
Meme viper angled foregrip
Meme grip with space in it
Wolff extra power spring and firing pin
And a chink shit flash light attached via scope mounts
Form 1 ss 11 inch suppressor in the
future and replacing brace with the new sba3 brace.

Attached: A399EBD6-2B9D-4072-97F9-DCFB23368C40.jpg (870x373, 108K)

I have an M962, no peq2 tho until NODs
I'm not a veteran of the clone wars, I can only larp in it's wake

Attached: Mk18 mod 0.jpg (2735x1823, 1.43M)

I hope you don't wake up!

You should get a new rail m8. That one is beat to shit, and ruining your aesthetics. Get a NT4 MD at least.

You could have bought the upper from LMT.

I have another KAC RAS on my AR but I got that upper complete with the BCG and CH for $400, it being beat up comes with the territory
NT4 will be bought with when it's corresponding suppressor clears

List your parts. Inb4 just as good PSA special.

You actually bought a NT4 can? lel
You went full meme.

>Colt 10.3" Complete upper Keyhole+C mark, F marked FSP
>Colt C Marked BCG
>CQD Sling Mount
>Colt marked CH
>A2 Birdcage
>KAC RAS
>KAC 6+11 rib panels, VFG
>LMT L8A BUIS

Attached: Upper.jpg (1600x900, 1.32M)

Do they suck? I've always heard good things, even for its age.

at least I have chicken

that better be Mil-Spec Dust cover

It's correct m8, don't you worry
Full autism

lmfao that is hideous trash. kys dude

Nah

?

I'm glad we have people fighting for our 2A rights

Attached: GunRights.jpg (544x631, 62K)

Aight. Paint that RAS or serious dump it. At the very least, get some birchwood casey aluminum black and touch it up.
Not me

If an A2 grip doesn't let me choke up enough, or if when I rest my middle finger on the shelf my index finger bunches up when trying to pull the trigger, do I need a grip that's more vertical or more angles?

I agree, its level of wear is inconsistent with the rest of the rifle.

God damn it Leroy.

You need a grip without the nub

Preparing to buy my first AR. I know pretty much nothing about them. Since I'm sure there's no consensus best AR what's shit that I should stay away from at all cost? Like who makes the RAS47 of ARs?

I'm looking to spend under $1000 if possible.

That just sounds like an argument for using the gun more

Attached: ACAUG.jpg (4032x2043, 3.56M)

Agreed. Whats the difference in angle between something like a K2 vs a BG-16 going to do for me?

I might do a full paint of the rifle once the lower clears, months from now
But desu, mk18 mod 0 rifles still in service would be salty and worn as fuck, the RAS especially, it doesn't bother me at all, but knowing it triggers FA is satisfying Guns are meant to be used, and as long as it's clean enough to function reliably I couldn't care less how worn they are

They are unkillable and aesthetic, but the POI shifts are terrible. They weigh a ton too.

Hold it with your ring finger above the nub and the middle finger wedged on top/in between it and the trigger guard.

I come from the future

Attached: P_20180523_130051_vHDR_Auto.jpg (3928x2208, 2.1M)

Attached: ushmasterwithweaver.jpg (750x600, 85K)

Just hold it lower and follow the nub. Don't choke it.

yeah while leaving the RAS at home
I'm not triggered it's just something I notice, what I am saying is if you want wear, which you do, the parts of the rifle should have a similar level of wear as compared to each other, otherwise it's just obvious it's a newish build with a handguard that's been used by someone other than you.

go back

Opinions?
hobbyking.com/en_us/rfp-fiber-optic-illuminated-scopes-1-5-6x24-green.html

Attached: D3D54458-3610-4B6F-9F78-4005FD9ED98B.jpg (565x414, 23K)

Dude, it looks like shit.

Plz stay

Oops, I meant ring finger in my original post. When I use that grip, my index finger is way too scrunched.

it says on the fucking page
>• For airsoft only

S&w makes a solid cheap AR, but you could build something solid for that as well.
You could totally find a copy for around that as well

And this ?
aliexpress.com/item/SPINA-OPTICS-Tactical-Optical-Sight-3x32-Gp01-Fiber-Prism-Red-Green-Illuminated-Sight-Riflescope/32820724379.html

Attached: 95CD0E0C-8CB4-4DAC-B2CF-EE870DA9C02D.jpg (1000x667, 154K)

Hard pass

>he parts of the rifle should have a similar level of wear as compared to each other, otherwise it's just obvious it's a newish build with a handguard that's been used by someone other than you.
Jesus. Incel cuck posting arrives to /arg/. Bill btfo.

stop

Buy it

You need to move up to the next level, CVLIFE

Attached: FuckDeer.jpg (970x600, 129K)

Oh no, are the authenticity police going to come up to me on private land to give me a "not evenly worn" ticket?
Oh man, I really regret my decision, I guess I'll sell all my guns in the deep despair you've inflicted upon me
How could I have gone so wrong
Please tell me how to live my life better?

Attached: mk18 mod 0 3.jpg (736x920, 254K)

>larper doesn’t like wear

Attached: 226CD8F8-E1D3-4CB0-9B43-2FF38FF33D47.jpg (540x810, 103K)

No don't say that!
Say it's good then Ash can finally afford something and we can laugh after he buys it.

How about those 30 dollar acog clones?

I mean, no, I guess they won't. Wasn't trying to antagonize or anything, I just wanted to share the impression I got. If I was building such a nice clone with so much attention to detail put in I wouldn't want it to be so obvious the handguard had been used much more than the rifle it's currently on.

Attached: 15208080318467.png (657x527, 46K)

Someone please post some wood furniture ARs that look like comfy hunting platforms instead of tacticool black.

dream smasher

Buy one

>spends lots of money on clone
>cheaps out on RAS
W/e, we've already inceptioned that idea into your head. It's futile to fight it. You might as well fix it now, or come to the realization 5 months later.
Your choice.

I guess I'll consider swapping my other newer RAS on if it bothers me to the point I can't take it anymore
Thank you for your input FA, you're the least insufferable of your friends

i realize that reflection is not something your kind do very much but
sit back and take a moment to think about what you arent seeing what you want
you're a long way from home, son

What about finding some radium paint and painting a cross hair on a scope?

I pull AR triggers with the middle of my middle finger bone so it works for me, but that being said the A2 grip sucks and you should replace it if you don't like it. Those workarounds are for people who can't choose the grip on an issued rifle. I like Tangodown. Try a couple out and figure out what you like.

I spent a total of $505 on that entire upper, accessories and all
I have another RAS that is cleaner, it's on my other AR, I don't feel any need to switch them but I could if I wanted, just know that

Ruger SR556
Trijicon RX30A-51
Primary Arms 3× magnifier
Airborne Arms Geronimo trigger
Strike Industries selector
Some sort of cheap bipod

The magnifier+reflex sight combo actually works surprisingly well. She's definitely a size queen though, probably upwards of 9 or so pounds loaded. Unfortunately it doesn't look like there are lighter aftermarket handguards available.

Attached: 20180512_232227.jpg (4032x3024, 3.81M)

I love wear
if all of the parts were as beat up as the handguard, it would look fucking great, but that isn't the case, so in my humble opinion it looks just slightly awkward.
Thank you friend, I love the look of the Mod 0 and think your clone is going to be great. It's even put the idea of a Mod 0 inspired 10.3 in my head.

Attached: ScreenShot (57).png (1530x858, 418K)

Start over with a lot of things in this image

Looks great

Aw shucks, thanks FA
I'll post pics of it with the comp m2 and wilcox tomorrow, I can't wait to see it all together

Attached: Mk18 Mod 0 Nt4 PEQ2.jpg (1080x720, 75K)

>no gas buster
>no NT4
>no Aimpoint

Fuck off, retard.

Attached: txCmAVY_d.jpg (640x382, 58K)

Yeah, I was leaning towards the BG-16 myself. Either that, the K2 or a B5 P23

i know the guy who's pic that is, hes a real fuckin douchenozzle

Stamp when?

Just pull trigger with finger tip like you should. A2 is fine. Aesthetic, but not comfortable. Beauty hurts, or something like that according to Beyonce.
I wish someone could shop and compile a collage of all the AR 15 grips.

word up

Attached: 149315990265.jpg (677x445, 196K)

Hey anons, how much should i sell my DD m4v5s?

DD brown cerakote
14.5in pin flash hider
moderately used, 2k rounds, and the only scratches are from the mounts, ch, and dust cover.

Was gonna walk around my local gun show and sell it for $800-1k, Probably 1k, and have people work down to 800-900. I never see DD rifles in my area, southern VA, so i figure that was a decent price.

K senpai. We know you're a big boy, just wanted to look out for you.

>real fuckin douchenozzle
whats his trip

Attached: Zombie-6.jpg (750x597, 170K)

>Gasbuster
Shit, you're right I forgot
>NT4
There are mk18s without, I believe
>Aimpoint
Arriving tomorrow my man, with the right mount and all
Applied recently, so 6-9 months I'd imagine

>There are mk18s without, I believe
Doesnt give you an excuse to make such a shitblaster. Hop to it or ill call mr goldberg and have him send you back to nyc

No, I'm not shooting at rooftops in Somalia with this thing, I'm plinking at coke cans in the woods.

his skin isnt thick enough for Jow Forums in general, dude is a giant manchild keyboard warrior

he actually had a little fit because somebody else was making money off Instagram posts and he wasnt

>excuses for being retarded
sprite zero cans are invisible under that RX30 I bet

Anything but that Mr. Goldberg! I gots my freedom papers now!
I'm not in a huge rush to pick up an NT4 until I have the suppressor in hand, but if one comes up I'll probably snag it and install it, I haven't paid anywhere near list for anything on it so far, Tacswap is a goldmine for unwanted clone parts

either gasbuster is correct, i like the combat latch better, the smooth latch is OK but i like my latches as large as possible

for $40-50 you can find takeoff NT4's, you might as well get one, i dont even have an NT4 can yet and ive got one on mine

>Arriving tomorrow my man, with the right mount and all
IT BETTER BE

The QRP mount is absolute shit, i put off getting a wilcox mount when i came across a CASV-EL at a steal and i really shoulda just bit the bullet and bought a wilcox when they were more available

*12-24 months

Haven't seen any of those NT4s on market recently
Anywhere to look besides EE, TS or Ebay?
Got the Comp+Wilcox for $325

So buy the can already you fuck it comes with an NT4 inside it. Have your FFL fish it out and hand it over to you

Attached: 1365225352052.jpg (696x462, 52K)

Why are you selling? Seems like a nice rifle.
Normally, I'd tell you to part it out, but it's color coordinated in meme brown.

How the fuck do you browse tacswap? The format more cancerous than reddit.

CRA is where i get most of my shit, arfcom is a dumpster fire 90% of the time

>Got the Comp+Wilcox for $325
oh fuck you

i paid $280 for just my aimpoint, but its an actual military optic so i guess i cant be too mad