Gas mask thread

What is this creature and where do i get one?
Why do we not make clear orange masks no more?

Attached: 15380471_1249198568527545_7607934251504517549_n.jpg (645x960, 118K)

Other urls found in this thread:

yuki.la/k/36623825
twitter.com/AnonBabble

MSA Millennium

the colored shield is removable and can be replaced with black or green too

good biohazard protocol for hypothetical ebola apocalypse?

Attached: 1527489795435.gif (500x400, 181K)

OP's pic is a fetish modified XM29. These masks are extremely hard to find in any condition.

The XM29 did not have any lens outserts.

Attached: XM29 Variants.png (701x950, 1.11M)

Hey Duke, what's this?

Attached: Ultimate NBC suit.jpg (600x900, 76K)

Absolute degeneracy.

>I thought I'd do a video on the Rasta bong mask
>so it's based on the Israeli civilian mask , which in turn is a copy of the Dräger Simplex
>it uses a normalized 40mm thread, so both GOST and NATO bongs will fit, though I wouldn't recommend using Soviet bongs because they might contain asbesTOSS
>Now where's my cannabis-scented air freshener?

Attached: I THOUGHT I'D DO A VIDEO ON THE RASTA BONG MASK.jpg (952x1000, 588K)

> mfw I thought Jow Forums may be a place to get advice on gas masks for protests and/or happenings

Well then.

post moar

Attached: D6167729-6DCC-4428-8014-3953AC5743CC.jpg (1200x755, 122K)

Anybody have a screencap of the flexseal thread?

It's a modified Chinese M-69.

Coat dick in flexseal?

It is, sometimes. There's good and bad mask threads, there's never enough for a general so it mostly boils down to shitty threads starting and Duke answering questions. I help when I can but there's really not much to do, desu.

>coat entire body in flexseal
>while wet apply gas mask
>ta-da complete protection

the What Now.

CESCO No. 92 half mask, approved for dusts 8th November, 1937 by the Bureau of Mines. Approval No. BM-2116, schedule 21 being generally for half masks.

Manufactured by CESCO (Chicago EyeShield CO.), Chicago, Il., USA.

Attached: 20180528_205242.jpg (1032x581, 147K)

The GP-5 is objectively better desu

Attached: IMG_8381.jpg (1024x614, 351K)

Also my fiancé keeps her's in her purse for some weird reason (I just keep mine in my car)

>CESCO
Sounds oppressive and white but ok.

It was a thread that started out with a guy wanting to bubba his rifle together with flexseal and quickly got derailed into painting yourself with flexseal to protect against NBC threats. iirc it then got derailed again into rubber puppy pet play for the purpose of raising morale.

Also, anyone got one of these for sale? Should say Foamalite or something like that on the outside edge.
>feeling oppressed by a safety glasses company

Attached: foamalite.png (767x579, 87K)

I found this but I couldn't find the original

yuki.la/k/36623825

Bet you can't find a picture of a POC, using a CESCO item now, can you?

Attached: 2343252134123.jpg (383x578, 62K)

CESCO was never really interesting enough to get contracts or attention to the point where we have a lot of period photographs.

see like I mentioned before, there's been 5 gas mask threads in the past two days and every one of them get taken down by the next day. I've just been hopping in and out of 'em, not really expecting much substance.

OwO wats dis??? *saves pic*

Attached: a gp5 to surpass metal gear (1).jpg (1600x1200, 691K)

only political off-topic threads stay up for days.

You're not wrong, sadly.

Attached: Davis M-0.png (422x830, 320K)

usually gas mask threads last at least a couple days.
the past week, they've just been popping on and off like a baby boomer with a fistful of viagra

Attached: 50 shades of cem 2.jpg (1600x1200, 567K)

Attached: 56197b2e32af45a03002065581e4d32d3b77662fd76bc39dca5bf1914827622a.png (1066x917, 1.07M)

What the hell are those lenses and outlet?

please, i can only OwO so many times in one thread

those are lenses off an Israeli Model No. 4 and the valve assembly is off an MSA Ultravue lmao
ignore the .exif autorotate, too lazy to save as in ms paint rn

Attached: a gp5 to surpass metal gear (2).jpg (1600x1200, 579K)

So it's a westernized GP-5, does it seal?

Attached: onlyoldfagswillrememberthis.jpg (408x528, 45K)

i dont think its westernized i think its just jerry rigged. the hood is still stock.

GTFO with this boomer fetish posting..

nope
it might with the Model No.4 valve assembly, though

yeah, it's just a mashup i made for shiggles

Attached: Willson G4 and Modified Zodiak ABC-Schutzanzug (3).jpg (1195x1569, 415K)

Why does your chemical suit look like it was made by bondage fetishists, too many straps....

Is it German?

It's a German Zodiak suit, yes
the kinky factor is befitting to this particular thread

Attached: Willson G4 and Modified Zodiak ABC-Schutzanzug (1).jpg (805x1725, 296K)

Can you use it as a SCUBA suit?

potentially, with plenty of modificationss. The big problem is the 'cummerbund' waist seal where the top and bottoms roll together. I don't think it's watertight. Also the hood would have to be modified in some way to seal against the face and wear a mask over top of it. Not to mention adding inflator/exhaust valves.

Really I'm just going to end up buying a commercial hazmat drysuit eventually somehow. they cost anywhere from $500-$1,500, so it won't be anytime soon.

Attached: Atlantic Commercial Diver's Harness und ABC-Schutzanzug.jpg (2920x1920, 1.23M)

imagine going to a leather club dressed like scuba steve's hazmat cousin.

>leather club
gross
only rubber for me

Attached: Zodiak 7.jpg (1600x1200, 654K)

Leather gas masks > Rubber gas masks

Change my mind

Attached: Opt.05.jpg (312x223, 21K)

you do realize leather shrinks when exposed to certain types of gasses, right?
Germany only used leather because they cannot into rubber

Attached: maskhistory.jpg (1600x957, 229K)

>Everybody point and laugh at the new pup

A E S T H E T I C Though bro
And quality Luxuries Italian leather

You get stinky Indonesian or Indian rubber.
Rubber faqqs BTFO

Attached: IT-0001-01.jpg (500x416, 54K)

Looks like someone needs special training

Attached: 3C7EF9BA-9D0A-44C7-BB83-934749A4AB1D.jpg (1024x683, 104K)

Implying I get my rubber from anywhere other than straight from the Akron rubber springs

Attached: 20180519_204931.jpg (4128x2322, 2.01M)

>parts too bulky
>mask fits poorly
>outlet valve too small
>design was literally shitcanned in les than 5 years
that mask is a good example of everything wrong you could do with a gas mask design and the fact you're basing your arguments off of pure "aesthetics" alone
also that hose is still rubber, get fucked

the pups are here
finally, a good gas mask thread for once

Attached: IP-4 and KR-1U (3).jpg (1200x1600, 240K)

Good luck with your shitty Neoprene, gets too cold you are fucked, most of your REAL rubber (Natural latex) was imported from the BRITISH COLONY of INDIA

Leather masks win again kid
Not to mention leather is NON-TOXIC and NUTRITIOUS , i won't die of Latex poisoning, i can eat a GM-17 as a snack, or as a emergency food supply if i was starving , can you say the same with Neoprene and latex American?

Attached: GM17..jpg (500x425, 39K)

>having a latex allergy
lmao i bet you're allergic to gluten as well you fucking basedboy
also they literally only made one mask out of neoprene
try harder, retard

Attached: M3-10A1-6 Lightweight Service.jpg (1200x1600, 287K)

Latex is literally toxic for consumption buddy...
It's not an allergy thing

why would you want to eat it, though???
probably not as toxic as whatever treatments they gave to leather to make it somewhat capable of gas protection
literal fucking brainlet hours

You mean linseed oil....?
Far less toxic than latex, have you ever handled the liquid stuff, it can leave burns and rashes on your skin.

any of you guys have any recommendations for gas masks? im trying to get into basic prepping mostly for the fun and for the collectability of some items but obviously actual functionality is paramount to anything like this, i was looking at the Yugoslavian M1 and they seem relatively cheap however i don't really know that much about gas masks. thanks for the help fellas.

...now I want a leather mask for winter biker gear. Thanks Jow Forums.

I hope you know GP-5 has asbestos.

Attached: 1515496160196.gif (276x220, 799K)

y'all ever just drink a fucking gallon of linseed oil
also that's because liquid rubber has ammonia as a preservative that evaporates as it cures
the rubber itself isn't causing the skin irritation assuming you're not a latex allergy fag

>yugo m1
no
just no on so many levels
get an isreali Model No.4a1, they're the same price range and infinitely superior

Of course if you let it harden it's toxic, I've chugged liquid rubber direct from Akron's municipal tap, and become a better dog through it. Get fucked, normie.

Attached: 20180512_002910.jpg (4128x2322, 2.66M)

sign me the fuck up~ ouo

well price isn't really a problem user, I just thought it looked cool, whats your reasoning for disliking it? I would assume it is because its eastern block but i thought it might be ok because its Yugoslavian. again thanks for the advice, will look at the one you recommended.

after reading up on a few things i think i see your reasoning why, no peripheral seal, uses 60mm filters that if produced pre 1990 may contain chromium or other dangerous materials, anything else im missing?

You forgot Commie slavshit

covered in the first post m8 >whats your reasoning for disliking it? I would assume it is because its eastern block but i thought it might be ok because its Yugoslavian.

>rubber prone to melting
>harness prone to breaking
>60mm
>generally shit-tier materials
user, I advise you to please to research from a proper source other than Jow Forums
I can't even begin to list why this mask would be the worst possible choice and frankly, I'm too tired right now to go on about it. if money's not an issue, get an avon FM-12. That's all you need to know, no questions asked.

Attached: serbm1(2).jpg (1636x1488, 443K)

bump goddamn it

Attached: frogtism 1.jpg (1600x1200, 516K)

fucking hell with this autorotate bullshit christ almighty

Attached: Dive7.jpg (915x1968, 302K)

Do you have to tuck your penor buddy?

ye

Attached: divestab.jpg (1488x1984, 643K)

Attached: Screenshot_2017-09-18-18-58-12.png (1080x1920, 1.82M)

again
sign me the fuck up

Is this real?

hot

>the pups are here
We were always here

Attached: 20170828_200442-907x1500.jpg (907x1500, 171K)

not all soviet filters have asbestos

feel free to speak up more often, then
the last dozen gas mask threads have been utter garbage
i welcome the pup content, it's a definite improvement over the plethora of gp-5 kiddos and 3m shills

Attached: The Beast.jpg (1600x1200, 573K)

Can the user who knows where to buy the Scott m95 drinking piece please link me to the website that sells them. I've looked everywhere for them and closest I've found is a website that doesn't allow you to add to cart.

Attached: s-l400.jpg (400x300, 18K)

Come, sit with us friend.

Attached: 5801711032_edc1d9ce9f_b.jpg (800x600, 121K)

I'll have to get some pup pics with my mask then, unfortunately, all I have is an M40 with tint lenses and a leather muzzle to go over it

Attached: 20180215_212036-250x250.jpg (250x250, 16K)

Attached: 5801708130_c1d1a1d860_b.jpg (800x600, 47K)

The real MVP's

Attached: 5801156415_52f0c21f09_b.jpg (600x800, 77K)

that would be me and I've stated before, I'm leaving that up to the individuals to find
scott only imported the canteens from finland, they never got the contract to produce them, so however many that site has is likely the last that we have for sale in the U.S., so I don't want every user and their mother drying 'em up in one week, nothing personal
wish you luck, though

Attached: [ ˢ ᶦ ᵖ ᵖ ].png (1009x572, 1.25M)

What is that bubble suit?

hell yeah, I fucking will

ouo

That's a Czech OPCH-70 suit that someone duct taped a tupperware container onto lol

Attached: Willson G4 and Modified Zodiak ABC-Schutzanzug (2).jpg (1243x1983, 495K)

Leather M40 muzzle?
Pics plz

Nice muffintop my dude

Attached: gas_mask_i.jpg (469x469, 34K)

Need my full suit for more photos, this was on my PC

Attached: 20180528_223536-882x1181.jpg (882x1181, 124K)

oh hell yes

meanwhile I still wanna eventually get one of those jackal masks like pic related
but the problem is, the site doesn't give a baseline default price, and I like to avoid asking people about what shit costs if I have no intention on buying it yet. for all I know, they charge like $300 or some shit
it's my understanding that anything custom fetish related is gouged out the ass in price

Attached: 000553f3-0da4-0e0e-274c-e64f9beac8f3_958.jpg (958x639, 189K)

You're exactly right about cost.
Why not make your own?

>TFW someone likes my dumb mask

I am disappointed in you Mr.J.

i definitely have the know-how, but I'm currently waiting to move in with my bf before I tackle any large projects like that. Hell, I'm still working out reproduction flapper valves for WWI masks (pic related).

F

Attached: CEM Filter Dissection & Restoration (58).jpg (1600x1200, 438K)

Make fetish masks and undercut the other guys

not even just fetish masks
I want to reproduce other shit as well
I'm working with a Japanese reenactor to make a Type 97 repro someday.

Attached: Imperial Japanese Navy Gas Mask Type 97.jpg (1329x1600, 313K)

Chinese already made a copy of the type-97 though, in cheek filter form.

I'm probably gonna be copping lenses off of those, assuming I don't work out any way to custom make my own lol

That's awesome

Can't you just cut polycarbonate sheets?

I was mostly talking about lens frames
I'd need custom dies and metal stamping machinery to make those

Yeah, that would be a pain. There has to be some workaround though. How thick is the metal? Could you laser cut a bunch of blanks and stamp them in one press? Something has to be cheaper than buying Chinese just for one part