AR 15 general -/arg/

Gonna go ahead and start a new thread edition
Or
Range pics edition

Attached: 20170310_161021.jpg (4032x3024, 1.66M)

Other urls found in this thread:

gungear.ca/acr-parts/acr-handguard
wcarmory.com/toolcraft-bcg-223-5-56-bolt-carrier-group-black-1b1b6-c-158-mpi-complete.htm
wcarmory.com/toolcraft-bcg-223-5-56-bolt-carrier-group-ni-bo-faceted-c-158-mpi-complete.htm
armslist.com/posts/8328613/oklahoma-city-oklahoma-handguns-for-sale--b-t-uswa1-with-extras
twitter.com/NSFWRedditImage

Old:

Attached: 20171019_194629.jpg (2367x3024, 3.3M)

How to not suck at Shooting offhand

Practice. Watch magpul dynamics for LARP shooting basics. What kind of stance are you using?

Similar to this

I am used to Shooting Sub 1/2 MOA Groups with a bolt rifle off a bipod and now my hits are all over the place. And by that I mean a 5-8" spread.

Attached: rifle_position_prone[1].jpg (520x145, 16K)

Thank fucking god.
Trips never let user make another thread again

Ah. I thought you meant standing off hand.

Just learn to relax yourself and figure out how your gun steadies the best. I have better luck on 20 round mags than 30s. Get flat.

What gun and ammo?

Real good morning hours
>Thinking about my barrel delivery
>Remember FDE user sent me a care package
>Check mailbox
What a triple OG sonovabitch, he sent me all this stuff without me even asking him because I asked someone to sell me a birdcage and trigger guard. Here's to the good anons
What's this 45th and 2nd nonsense? Some sort of Nascar thing?

Attached: FDEanonCarePackage.jpg (1664x936, 978K)

2nd amendment and I can only assume that the 45th is representative of Trump's term as President.

Nice. I've had better dealings with guys in /arg/ and /hg/ than anywhere on the internet

Attached: 20170128_182938.jpg (1805x2283, 2.85M)

Why is everyone here an insufferable cunt?

I still love you user

Attached: 9751e7f2c8ee82099de4f438d4bc62d7.jpg (850x1367, 201K)

Who's being insufferable?

Attached: 20180526_145426.jpg (1873x3024, 2.21M)

Looking for volunteers? I got dis!!

Attached: 1526930950535.jpg (524x492, 60K)

>can’t even read where it says amendment
Wipe the cum out if your eyes retard

16.75" Walther Medium barrel 1:8
55gr Geco fmj

Attached: IMG_4190.jpg (2592x1728, 2.33M)

Attached: 5acf8421522fcd002450d0e3.jpg (1080x2219, 341K)

>Ask a question
>get called a fag and to kms by several fags
It's like /gq/ when you ask a question and trap fucker says the same thing

Morning /arg/

Attached: j0mei0taxys01.jpg (4032x2268, 1.52M)

Ash, as always.
anons and visiting Jow Forumstards.
There were several political threads last night at the same time.

Comfy ACOG

Attached: 20180524_193632.jpg (3623x2441, 2.51M)

Kys

What's the question? Last thread was kind of a mess run by angry anons.

Thats to be expected.

Those drums make for good pictures. Morning

Morning.

Attached: 20171017_144153.jpg (1793x2831, 3.82M)

>bulge

Should I cop?

Attached: M16a104.jpg (800x533, 150K)

How do you like your ACR? I'm thinking of getting the DMR model and wondered if they had any problems I should be aware of.

Attached: 1527106555774.jpg (1024x577, 56K)

I like it. It's just super heavy with limited aftermarket currently. Bush Master had promised more support "soon", but it took then 10 years to start supporting it in the first place.

It's a fun shooter, fully ambi, and has a non reciprocating CH. If you can find one locally to look at, check it out. Iirc, the for variant has a PRS stock and the tri rail, which will probably put the gun around 10ish lbs. Be sure you want all that weight.

You can always get a barrel assembly in 14.5 later and swap it around and keep the 18" for playing around with.

Attached: DSC_0137-750x400.jpg (750x400, 81K)

Selling your ecos?

Anyone order from Optics Planet before?
I got the 2-day shipping, how long does it typically take for them to ship shit?

Attached: DSC_0232.png (1921x1276, 3.82M)

How to shoot standing up? Just stand up.
t. PatMac

Doesn't really matter where your feet are because terrain varies. Just have a comfortable grip and good trigger control

Pretty much takes a whole geological epoch for them to ship.

Do you have anything more concrete? Like you ordered something and it took x days to ship or x days to complete processing?

My plan was to replace the PRS with the normal folding stock and replace the handguard with the Midwest mlok, it will still be heavy with the 18.5 inch barrel but I should at least be able to shave off a pound or 2. It's one of very few non Chinese options here in Canada and it's a he'll of a lot cheaper than a B&T. I'll try and find one to handle sometime soon

2-3 business months

the guy is, for 1400, i am thinking about it. is that gud price?

having a good comp helps too

You asked a couple threads ago, right?
Check out RPM precision handguards. They've got some in stock here: gungear.ca/acr-parts/acr-handguard

They look a little nicer imo, and they aren't as blocky as the MI. Either would be fine, though. The MI actually adds a little rails space iirc.

Can you not get the plain 16" version? I'm not super familiar with your gun laws.

Opticsplanet is notorious for not shipping for months at a time. They usually have things listed that aren't in stock according to some user on here, and they just ship it when/if they get it in stock. Some anons have reported it taking as long as 4-6 months.

I'm not sure. Just saw that pic while browsing tacswap.

Why is no one talking about the many war crimes the US perpetrated in the Korean war

Attached: Koreans_from_Hamhung_identify_the_bodies_of_some_300_political_prisoners_who_were_killed_by_the_Nort (2920x2048, 1.26M)

>Opticsplanet is notorious for not shipping for months at a time. They usually have things listed that aren't in stock according to some user on here, and they just ship it when/if they get it in stock. Some anons have reported it taking as long as 4-6 months.
That almost makes me want to cancel my order.

To me they shipped stuff ranging from same day order was placed, to 3 days after order. That’s for items marked “in stock”

Fluffy, eat a Snickers.

If you can take the wait, they've usually got some really good deals. Otherwise, see if you can find something comparable and order there.

Maybe give it a few days before you go off anecdotes I'm fuzzy on, though.

The live chat said it's done processing and about to ship but the order status says still processing.
Scale of 1 to 10, how fucked am i?

Ya I asked about them last night and looked at some reviews, the more I read the more appealing it is. I can get the 16" model but it would be restricted meaning I could only use it on a range but since I already have an AR which is restricted I wanted the 18.5 non restricted model so I can fuck around in the woods with it. It's hard to justify a large price tag on a range toy but not so bad for something I can bring everywhere.

Attached: 20180503_205133.jpg (5312x2988, 3.48M)

2, they are being slow because of the recent Memorial Day sale (they had a 10% off coupon on everything, that’s not rare and results in sales peak because people are waiting for it)

Y'all are making me nervous.

Attached: OpticsPlanet.png (899x354, 32K)

>What was the Sinchon massacre

That actually happened

Attached: 3980227225_89749b9915_b.jpg (1024x768, 338K)

got a mro with cowitness mount for 290, did i do good?

Attached: fHz2tuL_d.jpg (640x480, 27K)

When did you order it? Give it 3 days.

PSA took about a week to process my last order from them

I hear you. I'd say go for it. See if they offer a non enhanced version of the 18". It would have the carbine stock and MOE handguards already installed.

Sure

Attached: north_korea_museum.jpg (450x709, 239K)

Yes, MRO isn’t as bad as /arg/ makes it out to be.

Pricewise, yes. Red dot wise, you did okay.

Yes.
Trijicon makes good products. The only downside I've ever heard about it is that it's not a true 1x. It's something like 1.3x or 1.4x.
And that it has a blue hue.
290 is a fantastic deal.

>MRO

Good morning /arg/

For that price, yeah.

Honestly, this. It's definitely not the greatest red dot, and I'd take a PRO or EXPS2 over the MRO at around $400. But it's not nearly as bad as the memes have made it out to be and it's still a viable option imo.

Attached: 2015-09-25 02.52.00 1_resized.jpg (2656x1494, 1.31M)

The only non restricted model is the DMR and I don't mind that so much, everything I read about it says its very accrurate and I'm a fairly big guy so the weight shouldn't be an issue.

Opinions on carbines with flip up gas block irons (like YHM)?

I've liked the looks of the old colt LE carbines for a while and I'm thinking a build similar to one, just with a few improvements (stock, handguard, etc).

Attached: wm_3343748.jpg (1024x683, 167K)

Should I buy this? and if not what should I get.

Attached: Screenshot_20180531-103857.png (1440x2560, 680K)

>saging in /arg/
git gone

I'ts suspiciously cheap.
Don't touch the sight while using the gun. It gets hot af.

Nickle Boron can flake off, and on a cheap carrier it will probably happen sooner. Get a cryptic bcg for some quality.

What's a good magnifier for wounting in front of a Aimpoint Micro?
Do I really Need to spend the 600 on the aimpoint one or are there other "just as good" ones?
For that price I could get a decent variable scope

When sight is folding, potato forgets that it’s a gas block and tries to unfold it?

G33, yes a scope would be cheaper by the time you have T2+G33.
Just get acog and train your brain to superimpose magnified image into the big wide world your left eye can see.

What about this

Attached: Screenshot_20180531-105110.jpg (1073x2007, 398K)

Was left in the name field from responding to some lefty b8, tard. Context is clearly not sageing and notice the thread bumped. Hmmmmm.

No, TRex has a video on this bcg not working because it’s out of spec.

Good morning /arg/, happy Friday Eve!

Finally found a RAS in excellent condition with rail panels and a VFG for $100 shipped. So I got that going for me which is nice. Hopefully the seller gets back to me soon and hasn't sold it already.

Now I just need to order my 1B1B6 BCG and I'll GTG. One Blackhawk buttstock mag pouch and it'll be just like old times.

That's a damn fine price for that piece.

Pinned is meh, never seen one very appealing. If it's set screwed I'd be wary. A low profile gas block sure, but a full front sight just set screwed doesn't instill confidence in me.

wcarmory.com/toolcraft-bcg-223-5-56-bolt-carrier-group-black-1b1b6-c-158-mpi-complete.htm

Attached: good-morning-arg.jpg (699x560, 122K)

How autistic are you?

That's a great deal on the RAS.
>Blackhawk buttstock mag pouch
I've been looking at mag pouches myself but I want one with velcro for a patch, any ideas? I also had a bad dream last night that when my barrel came it was airsoft, almost woke up in a cold sweat

Attached: comeatme.jpg (936x1664, 359K)

You're killing the OC game. Nice.

Not a bad AR at all.

Have you watched the SAGE dynamics video where the parallax shift resulted in like a 4x increase in group size?

Morning dude!

Attached: T I G E R S T R I P E.jpg (3234x2349, 3.52M)

You watch his LPVO video yet? I meant to check it out. I may have my SE and ADM sold.

Mornin, CA.

Attached: 20160911_123929.jpg (2433x3079, 598K)

And then there are a number of other videos where people have success with the MRO.

>when my barrel came it was airsoft
Sweet Jesus.
>velcro patch
Yeah easy my man, find the pouch you want then just take it to the tailor at the PX and get them to sew a velcro patch on in your choice of color. Alternatively, any seamstress or even yourself can get velcro from Hobby Lobby, Michael's, even Walmart and just stitch it on yourself. I've had to do this on a couple of bags that I wanted to mark with velcro backed medical patches. It's a single pass lock stitch typically, shouldn't take but 20 minutes by hand if you take your time and be sure to measure and mark as needed. You can use safety pins to hold the panel in place as you sew.

Mornin guys, have a kick ass day!

Attached: 1521814861109.jpg (320x313, 45K)

I want silver coated bolt is this what I want

Attached: Screenshot_20180531-110126.jpg (1080x2655, 596K)

That's fine.

I'd go with the Toolcraft over some AIM special anyday of the week. You have a choice there between a rounded BCG or a faceted one. Here's the faceted:
wcarmory.com/toolcraft-bcg-223-5-56-bolt-carrier-group-ni-bo-faceted-c-158-mpi-complete.htm

I stick with round but some anons with more experience with them may have some input on faceted BCG pros and cons.

People are still buying the NiB meme?

Someone sell me a T1/2. My 14.5 is nekkid

Attached: 20180522_102701.jpg (4032x3024, 2.23M)

>early serial number

Um, no.

What about the Vortex VMX-3T?
I'd only put it on for range use anyways.

Yes, it’s that or cryptic silver.

>sew a velcro patch on
This is one of those time where you feel really stupid for missing the easiest solution that's right in front of you. /arg/ doesn't deserve you, thanks
Very eager to see your A4 completed as well. Just missing BCG, light, pouch and cog(carry handle in the meantime is still going to look great), right? Oh yeah, are you doing traditional 3point for sling?

Attached: NoThanks.jpg (2539x1429, 460K)

Should I trade my 512 for a H1?
There's a guy wanting a straight trade.

Nice glad to hear that stuff is moving. Makes room for other stuff.

Then what you have pictured is a solid choice if you insist. Or save yourself $40 and just get a black one.

Attached: 20180515_185803.jpg (2656x1494, 2.3M)

how so? if this fails, ill resell it at our gunshow

Listen Healthy Ash,
It would be great if you would stop posting. Last weekend was an amazing time to be a part of /arg/. Now that you and Ash are back, the threads have devolved into shit. I would appreciate it if you just left.
Sincerely,
Literally everyone else on this general.

You're fine. For $

They were first run units that had heavy magnification (way more than 1.05x that trijicon claims) and varying degrees of blue tint, mro' s after serial 89000 were corrected and were confirmed to be 1.00x with a more consistent lighter blue tint.

For 300 GBP you are probably ok, I sold mine for roughly the same price plus 150 for the kdg sidelok, so you probably won't get burned when you go to sell it.

Attached: Screenshot_20180531-092118.jpg (1185x304, 85K)

Sometimes it's difficult to see the forest for all the trees. Yup BCG, M951, Blackhawk! pouch, TA31RCO-A4CP, I can make do with my Matech for a bit but I do want to get a KAC Micro 600M.

For the sling I'm still debating, I tend to shoot a rifle this size "slinged up", so whichever will allow me to achieve that best. But it'll probably be a two point attached to the buttstock pouch and the front sling loop.

Although I'll probably diverge from any historical accuracy once I get the COG since I've already got an ADM mount for it and the M951. And I do want to scavenge the Harris bipod from my Ruger and get a QD mount for it. Prone shooting an A4 from a bipod is smooooth.

You've got me wanting a 20" now. I've got that Anderson lower lying around, and I've been debating whether to turn it into a 10.5ish carry handle gun or just do up a basic 16" with plastic handguards.

>healthy ash
fucking savage

Attached: 1504271459066.gif (500x354, 259K)

>Why is everyone here an insufferable cunt?
Honestly, it usually isn't that bad, user. Emotions are unfiltered when you're user; I'm sure everyone on AR15 forums want to tell me the same thing when I post some stupid ass question about my PSA upper, they just don't want a self-righteous mod to ban them.

Guys
armslist.com/posts/8328613/oklahoma-city-oklahoma-handguns-for-sale--b-t-uswa1-with-extras

you're a long way from home, son
perhaps you'd be happier back in your hug box subreddit

>machine pistol in semi-auto
ehh

Want

Attached: Screenshot_20180528-194500~3.png (1080x829, 789K)

But it's got an aimpoint nano. That s one smaller than micro.

I guess it's the utilitarian in me

Attached: 1498586725147.jpg (683x1024, 218K)