/arg/
AR thread
Bullyzone
Cancer containment
ACOG BTFO edition
Old
/arg/
AR thread
Bullyzone
Cancer containment
ACOG BTFO edition
Old
Other urls found in this thread:
amazon.com
twitter.com
I bought an AR :)
ACOG is still goat, zoomer
Help me take out this pin, am I supposed to use a lot of force?
It has some pretty serious advantages.
>direct mounting, no scope rings means even a retard can do it
>no batteries for your retarded ass to forget
>fixed power, so you can't fuck that up either
If you're retarded, it's a great optic basically.
Re-posting from last thread:
A buddy of mine got a 70s era Colt SP1 he got on a trade, wants to sell it to me for $900, the only thing that seems off about it is it doesn't have the original handguard. I'm an AK guy so I don't know much about these, but it seems like a pretty good deal. Hes a car guy, not a gun guy.
Is there anything I should know about these rifles? Should I do it?
Post superior lpvos in this thread only.
>ACOG BTFO edition
Again?
ACOG - its great for retards!
>is there anything I should know
Yeah
>should I do it?
Not until you look it over. If hes making money at 900 there is something seriously wrong with it
Thats not superior
>faster
>lighter
>no clumsy 1x when you are also offsetting or piggybacking a red dot
>better glass than all lvpos under the k16i price tag
>more durable
>a e s t h e t i c
>daylight bright
>always ready
Acog forever best optic
Shhhh, let the retards think their Strike Eagle is superior
So post one then
do you have a roll pin punch
The acog glass isnt bad, but its not that nice.
no, Im using some pointy thing and a hammer, but I got it out about 1/3 I think, just gotta hammer on
>faster
No.
>lighter
Yes
>better glass
No
>the rest
Exactly, it's better if you're retarded.
OrangeCat just fuck off already you no AR faggot.
pull it out with pliers. Gently.
trying, its really hard, got it out about half ish way
you should really have a roll pin punch set if you are
1. an adult male
2. work on ARs
amazon.com
Just save yourself the headache now.
lmao
pfft, next you're gonna tell us how he needs a pivot pin tool or how you have to use a torque wrench to put a barrel in. Pussy.
The best part of the Acog is the ridiculously aggressive Chevron reticle
I hope the CEO of Trijicon dies and Trijicon goes bankrupt and loses their patents so we can have K16i's with Chevrons
in Arma 3 RHS KOTH I've gotten hundreds of one-tap kills between 100 and 400 meters only because of the chevron
While a torque wrench is probably a good idea, a torx driver and some elbow grease is all you really need
Not sure if you're being ironic or actually retarded.
>in Arma 3
Lol
>that subtle dimpling
Nice
This gun is owned by a lefty you blind fuck
Oh do mine next
buy a mars you dumb fuck
Wrong
Not my gun retard
Of course not you poor piece of shit.
Post Doggos
>be retard
>get called retard cause of it
>lash out anyways
l m a o
It's still a lefty's gun
Are Brownells BCGs any good? Currently putting together an Aero Precision build and both the TiN and Nickel Boron BCGs at Brownells are on sale for $100, whereas the Aero Nitride BCG is $120.
Shut up fed
cuck posting another persons gun, thats cute. note how no one said it was a leftys gun, I said to buy the superior lower. keep posting a gun you don't own.
I didn't post the pic retard
>cuck posting another persons gun
You think about 'cucks' far to often for it to be healthy
Has the k16i been spotted on "block 3"?
What's the consensus on "pig tail" gas tubes?
I'm building a 10.5" .300 BLK, FWIW.
I mean you think about sucking cocks far to often to be healthy but we just call you progressive instead.
Jesus christ dude just get a normal gas tube.
Actually, while I'm asking total AR-noob questions, what should I be looking for when it comes to gas blocks?
I'm building a FF, so it'll need to be a low profile, but what else should I know?
I only ask because I've heard through the grapevine that shorties can be difficult to tune properly.
That is not how physics works. The pressure is determined bu the position of the gas port, the extra length of tube provided by the pigtail gas tube will change the pressure in no meaningful way.
also 300 blk is specifically designed to be run using pistol length gas ports, so why would you even need some hacky workaround for idiots?
Post.
This is my first AR, user. Asking questions is how you learn. I just saw it while browsing for parts and figured it was worth inquiring.
Solutions in search of problems have some slick advertising
>I only ask because I've heard through the grapevine that shorties can be difficult to tune properly.
Right, ok, I get it now. 10.5" ARs in 5.56 blow back extra gas and have a very short dwell time, meaning parts wear slightly faster. They don't have any reliability issues if you're worried about that. But this only applies to 5.56, and if you're not firing suppressed or full auto it's not a big deal. You're going .300 blk, you won't have any problems with a 10.5" and a normal gas tube.
Don't do any janky shit like that.
/arg/ is a shithole dedicated to retards posting overpriced ARs, not helping people.
kill yourself milcloner
>overpriced
Post PSA.
Don't have anything PSA, sorry champ.
How much does your AR cost? I bet I have one that's more expensive.
Man I can't wait until summer
>out of this anti-gun hellhole called uni
>back in the woods
>able to make money again
>get a new glass
>new rifle stock to accommodate the full length gas system and 20" barrel
>new mlok handguard to replace the keymod
>i'll be able to post it on /arg/ and get thrashed and called a faggot
what more could a man ask for
I mean, I expect that to a certain degree. This IS Jow Forums, after all.
Can I get away with a normal buffer, or should I bump it up to an H2 or H3?
>rifle stock
>20" barrel
>mlok
Stay in school kiddo
Why not just buy a good upper like a BCM?
Ok, here it is :)
I'm not super experienced with .300 blk, all my ARs are 5.56.
I imagine you will mostly be firing supersonic, rather than subsonic if it's your first AR. I know BCM recommends an H3 buffer if firing supersonic in their .300blk uppers.
Not him, but there is immense value in building a complete AR as your first one. You know how everything goes together and get a much better idea of how every single part interacts. This helps identify problems in the future and helps you understand what you may want to upgrade.
well I have a carbine buffer and stock on there right now so why not just replace it with a rifle buffer and stock and use the carbine for a carbine build down the road?
Post AR fag
Stupid simple, which is a good thing you reard.
Because he's a nogunz shitflinger like half the people on the board
Carbine stocks on 20" looks good though
whole lot of no thanks
Thematic build and I want to put it together from parts.
The barrel I'm looking at is a 1:7 and I'm not quite sure how well that twist does for supersonic .300's. I'll keep that in mind, though.
The only bit I don't mind getting preassembled is the BCG, really, because an improperly peened gas key would be bad.
I don't want it to be overgassed have excessive wear on the buffer
>atf gathering intel on canine targets
go fuck yourself
Rifle gas 20" is the opposite of overgassed
That's like, the opposite of how it works. Carbines have more gas coming back than rifles.
>The only bit I don't mind getting preassembled is the BCG, really, because an improperly peened gas key would be bad.
Good call, the rest is easy and if you just watch a quick video of someone doing it, it's literally impossible to fuck up, with the exception of the front takedown pin detent. That thing loves to shoot across the fucking room even if you're careful, but once you do it a few times it's easy.
What gas impingement system would you guys recommend? Also looking for a new upper any recommendations?
I guess I'm thinking of a different problem then
>What gas impingement system would you guys recommend?
The longest possible for your barrel length. If 16" you want mid-length. If longer you want rifle. If shorter, you're stuck with carbine so you don't really have a choice.
>Also looking for a new upper any recommendations?
What is your budget and what do you want the gun for? Do you already have a barrel length in mind?
Boomer
Your thinking the difference between buffer spring rates and buffer weights.
These can easily be changed out to properly gas
How tho?
Ash started HRT. I hope he makes a cute trap.
He was chris chan all along
CWC is a total SJW now. Would be shocked if not super anti-gun.
He doesn't need HRT, he's already got huge tits.
If there is anyone on the whole earth who doesn't need a gun, it's Chris-chan.
>who doesn't need
I'd have gone with "shouldn't have".
Yea I'm looking for a 16". My budget is $500 max. I'm looking to use it for target shooting mostly.
Nah, everyone needs a gun. Just not him.
Ive been on HRT for a few months.
he's angry that your rifle isn't coated in 8 pounds of useless shit
You been on the Hamburgers, Ravioli Treatment?
I'm guessing you need that $500 to cover BCG and CH as well?
In that case go Aero precision. It's the best value to quality you're going to get.
no
Hormone Replacement Tuber?
im not ATF nibba
I got a fail zero BCG it's alright.
Then save an extra hundred and get whatever BCM looks pretty
Prove it