/arg/ AR General Tripfag Development Group

War? I wouldn't even call it a competition. There's nobody here that can legitimately challenge me on that front, though I welcome all who might try.

>3 rifles
>1 actual stock between them
yikes

you dun goofed, you just insulted an ATF agent, get ready to have your guns taken away and your dog shot.

>no 3rd pins

King npc of clone island

or do the FA clone

Attached: 14.5.png (882x360, 139K)

Do the FA clone

>yOUr sAfeTY iS oN bACkWaRDs

Attached: IMG_2222-2.jpg (4864x3648, 3.19M)

It's, like, post-2017 /arg/ user, like, duhhhhh.

Attached: WP_20190224_016.jpg (2255x1725, 1.3M)

ACOG isn't block ii

Yes it is. SU-237 (TA01 ECOS)

>M16A1 lower that belongs to your friends
>Block 2 upper
You tried!

Nobody cares, blocks are so 2015

Guys, I’m dead set on a 14.5 MCMR. Should I get the normal or ELW version? What are the pros and cons? Also I want to get a super 42 spring kit. Are they a meme or are they worth the hype?

>no friends
>nogunz

Enjoy your COPE.

ELW unless you're a sustained magdumper. Balance is real nice, even with a can hanging off the end

Attached: 20190205_140757.jpg (2018x1296, 2.19M)

So no 3 pins
Gotcha

I was cloning well before then, I'll be cloning long after. The rest of you are free to let fads dictate your hobbies.

My safety is backwards too, how do I fix this?

Attached: 15525334515634271657736705361857.jpg (4032x3024, 3.23M)

Nice try faggot, we all know RIS rails were hitting north of $600 for the rails alone a couple years ago, block cloning was peak fad and you're not above it

This is a good rifle.

ELW BFH CHF for sure.
Super 42 is stupid gay. Avoid.

Attached: DSC03330.jpg (4085x2724, 3.78M)

Call me a trendsetter.

Attached: DSC09107.jpg (1024x768, 635K)

Nigger, RIS rails are timeless. Good luck with your bendable Gayslee Rails.

You wish. That's all vanilla with no topping af

nice Bro I have that issue too. I just went out today and used mine

Attached: M4and 19x plus a big dick.jpg (3495x1965, 812K)

Pic is from 2012, numbnuts. Obviously my collection has grown in size and sophistications quite substantially since then. Not like you even know what you're looking at anyways.

Oh and BTW, Blue Bell home made vanilla is the best flavor of all time. Fkn fite me fgt.

Time moves on old man, that may have been cool then but we've all seen it a million times by now

No, you definitely haven't. But go ahead and keep thinking that.

Cringe post of the day

>post literal one of a kind item
>hurrr we've seen it a million times before

Like I said before, you don't even know what you're looking at. But that's okay, I wouldn't expect you to. Ignorance is bliss for the uninitiated. It's also free license to make a fool of yourself in front of those with a finer appreciation for such intricacies.

unironically, yes poorfag haha, but what is the minimum acceptable budget option for an upper? dont say bcm, i wanna get an aero lower with magpul purniture but i want a quality upper that wont break the bank. yes i know its not gonna be "just as good" but as long as its milspec i dont care about driving tacks at 10 miles. milspec is milspec

Attached: 1545626644271.jpg (1024x714, 140K)

>literal one of a kind item
>basic bitch ar15 i got when i was 20
wow they were right about tripfags

radical firearms or davidson defense

I mean just look at his name

Real shitposting hours.

Attached: 4dsg6f5sd4g65dg4d6f5g4.jpg (2016x1476, 1.12M)

hell yeah borther, buffoniboiz rise up.

Neofudds git

Attached: IMG_20190310_073408.jpg (1040x780, 154K)

Plz no bully

Attached: 01001101.jpg (1950x1060, 2.27M)

Attached: IMG_20190310_080548.jpg (4160x3120, 2.31M)

I mean, I don't hate it.

Looking to shoot out to 600-800 yards with an AR. What brands should I look at for getting a 20" upper already assembled? And whats a good optic

How much should I spend on a used rmr?

Youre drunk squid, go to bed

Attached: 1427909492196.jpg (500x373, 104K)

Bcm

Do you want more splash or more throw?

Which one would be preferable for outdoors use?

Leaning toward the 600 but really depends on use

600 has better splash than 300 has throw if that makes sense, but indoors use 300 all the way

Can I get a quick rundown on the super 42?

Meme

Give me your lists of top three buis I order

Bill tries to convince you that it will make your AR15 an MG42
It will not
It is inferior to a flat wire spring

KAC, MBUS, Troy

KAC
MBUS Pro
that's it

I'll will pay $70 to stop this sproing

Use grease for that.

It wont stop the sproing sound

>Ash trying to put on pants

1st build, got frustrated with the pins not fitting so I drilled bigger holes. Stupid. I know. What do I use as the pins now?

Attached: 606612964b9.jpg (4656x2620, 3.65M)

Gf phone postin

Buy a new lower you absolute mouth breather.

**For the trigger guard**

If you only drilled the trigger guard holes, just get a DD pistol grip with an attached trigger guard. Other companies might make them too. Then you don’t need pins

I mean... I know the picture might be blurry and upside down... But really I just need some that can fit a 1/16th hole for a couple mm besides my smol peen

post a picture of the other side of the gun

Not to shut that idea down I might just have to, but I did kinda pay for the fagpul to fit without problem and now I am stuck with it

MBUS Pros, KACs, Scalarworks

Attached: 0314190005.jpg (4656x2620, 3.25M)

I tried to show that the holes are simetrical, but now I am realizing the blade of the fan didn't help that.

Fagpul didn't fuck you're lower, you did

Stop being a sissy and be helpful for a change. Jesus. Not everything is an end all.

My friend we’ve all been frustrated with roll pins. However next time you have to stay strong. My first build had no trigger guard for the first year until I got a tool specifically for this reason. Look into “ar15 trigger guard tools”. They’re pretty nice and cheap

Why the fuck did you decide the best way to do this was to drill out the lower, through hard aluminum that actually costs something, instead of just drilling out a hole through the soft plastic trigger guard?

Eh I had the "tools" for it, an allen wrench and push pin or wtv it's called, I just ran out of patience.

Because drilling metal isn't hard at all, and I did drill the trigger guard first, and still didn't fit. So I drilled them to be the same.

Js lowers are not expensive at all. I got the cheaper set of things so I knew if I fucked up ULTRA BAD like you make out for yourself I at least didn't do it on a >50$ lower.

So my normal TA01 would look out of place on a block 2 upper?

Okay fine. Oversize pins are out there, but you'll have to buy a new trigger assembly at that point, because none of the standard shit fits oversized pins.
You can also try looking around for anti walk pins, but fitment may be fucky and lead to issues with your trigger.
Or you just just buy a new lower and not drill out holes like a moron.

Attached: 1552395089889m.jpg (1024x878, 57K)

You literally haven’t even read the thread. He is only talking about trigger guard. The best option is a grip with trigger guard.

250-350

TA01 is for 1... ecos acogs arent expensive now. although i would save up and try to get one with fiber optic top

sopmod block 1*

Attached: 20180715_122422.jpg (4032x1960, 2.04M)

Well my TA01 comes friday so.....

Attached: IMG_20190310_203136.jpg (1832x1374, 362K)

Does that eliminate the need for the pins?

how much did you pay for it?

Brownells block ii uppers are on sale again.
Traded accupower. So $445.

Attached: IMG_6670_jpg-852545.JPG.jpg (1200x900, 236K)

Eh, just saw it. It kinda still needs pins, maybe oversized pins will work. This trigger guard seems more like a decorative piece than anything, oh well.

Why were you retarded in the first place?

Attached: IMG_6549_jpg-831559.JPG.jpg (675x900, 85K)

What is the need for you to have a brain? It's like it lacks curiosity and capacity to learn. I didn't know how a gun worked until I began this project.