ARG AR THREAD TRIPFAG CONTAINMENT

>Bendy Bill (TM)

>Nothing in the 400-550 range offers a barrel longer than 16in
palmettostatearmory.com/psa-20-rifle-length-5-56-nato-1-7-nitride-lightweight-m-lok-a2-ept-rifle-516446246.html

Not sure why you would bother importing this though

#
>not TRP

Sad

Attached: 20190605_185609.jpg (1960x4032, 2.92M)

I live in the United States and would like to train on a rifle before moving up to Canada to join the army up there

>bullets only good for ringing steel or punching paper
its a meme

And I wanna keep all my (2) guns and bring them up. Actually fuck it I’ll just sell them. They ain’t that special. I’ll get an AR up there. What do you think boys? Are AR’s gonna be a million bucks up in CAN?

>162 gr eldx isnt a thing
Nice try

Y not just join the American Army eh?

7mm valkyrie a 7-08 for reloaders

DAB DAB DAB DAB DAB DAB DAB DAB

Attached: 62019-yeet-cannon-ar-15-lower.jpg (1200x750, 65K)

Doesn’t have the MOS I want, and it’s less likely I’ll be deployed to a nasty as shit place and/or killed. Also only have to deal with Canadian and UN stuff instead of UN and American stuff

What MOS? Moose milking?

> moving a shoulder
No thanks, I'd rather run a .243 lbc/6mm grundle and just have to worry about resizing the neck, and you can actually run a 115 nosler rdf in a 6mm grundle

It’s like 91F (small arms/arty repair) but more extensive and expansive and training is long as shit (35 weeks compared to the US 7 weeks) and involves more mechanical and electrical engineering stuff and room to grow and expand what you’re trained to repair and you can work on tanks and howitzers in addition to small arms and arty AND maybe most importantly, pay is NOT SOLELY BASED ON RANK, and is paid competitively, so doing cyber security or some shit will actually make you real money

Post Ash clones

ok

Attached: shortboi.jpg (1916x1104, 2.02M)

Is it normal for the BCG to move slightly in an upper?

Yes

these things are flying off the fucking shelf. 600 sold so far

Just move it and neck turn that shit.

But tbqhwyf 6mmAR a best

triarc 13.9 inch + warcomp = 16.1 inch?

Ordered one of these to get on the YEET Train!

Attached: 4cc8f1c03afaaed301ee0851e426d52b[1].png (1335x687, 498K)

I just noticed it actually says BACKLASH-15.
Fucking mint.

they have about 100 left of the AR15 one and a ton of the 9mm version (probably because no one knows the 9mm version exists)

whats a good .300 blk upper

Buy wgws's upper

Attached: apy.png (2108x1060, 815K)

I was thinking of throwing it on my WW multi lower but now considering having a dedicated SBR instead.

>tfw 40yo
>you realize everyone's a boomer

less than 50 PSA yeets left
they only have 750 planned because even they know its dumber than usual

who cares about that trash.

apparently 700 people. i might buy one for the hell of it

yeah, poorfags and zoomers, no thanks.

At least next year when you forget what the meme was you wont really have sunk that much money into it

If it's a gucci brand then you can't really go long, but if you're looking for a cheap one than who knows

i think that's the only reason anyone ever buys PSA's meme lowers. some of the arfcom people have all of the lowers but at $50 each they aren't that too far in all things considered.
most of these lowers are stupid as hell, this one included.

What's a reasonable cost for a first AR build? My buddy and I want to build this summer

youtube.com/watch?v=FypXeAW3gpU

$800

To that one user that was interested in buying my lower, I'm sorry I never got back to you but I lost that email and I ended up having to keep the lower anyways.

I am selling my upper tho in case anyone is interested.

Attached: 64374668_396649920942380_4938214712446812160_n.jpg (714x960, 271K)

Thanks.
Another question fellas, should I just get a complete upper for a first build? I wanna just shoot at the range, buddy wants to do the same

$600 is my lowball cost guess. Quality optic is going to cost you $50-150, Kits start at $250 and receivers are $100

This thing right now is $400 kit on PSA ( palmettostatearmory.com/16-mid-5-56-nato-1-7-nit-13-5-mlok-moe-ept-rk-w-mbus-ss.html ) plus a $120 Romeo5, $100 lower, $50 magnifier, $30 bipod and mount, sooo $700 total for me but with just the basics that's only $550 - $620 and there's cheaper kits.

I'm a retard and bought a cheap flip to side magnifier 6 mm too high of center but surprisingly it was still able to center it.

Attached: sip.png (1017x386, 724K)

Alright, sold. Now I have to make it into the memeiest build possible. Any suggestions?

Probably, yes.

>Quality optic is going to cost you $50-150
Its time to stop posting

Also yes that's my rear mbus mounted on the free float rail. I can get a better magnifier for 4x the cost but this one works and I just wanted to play with a bunch of different setups.Shits crowded tho. I originally had the mbus at the rear but you had to lean pretty far forward to focus the magnifier it and it was shit.

Attached: spacegats.jpg (3024x1470, 1.31M)

Going to have to use a binary trigger for max meme status and actually using the third setting.

I was going to set the bar at $100 but if you really deal shop you can get a decent carry handle sight or mbus set for ~$50.

I said memeiest, not retarded.

What's the most accurate 55 grain 5.56 plinking ammo? XM193 is inaccurate as shit.

Anyone ever try winchester 55 grain?

That looks nice. I guess you're in a restricted state? I was thinking of switching to all fixed stock anyways.

If you're not happy with XM193 then you should switch to a different rifle style.

Attached: mehfeels[1].png (323x332, 39K)

I've gotten decent groups with the 62gr OT Wincehster stuff. It's not match grade, but it's definitely better than m193 or m855 stuff.

sgammo.com/product/223-556mm-ammo/180-round-box-556mm-62-grain-open-tip-hollow-point-winchester-ammo-usa3162w-m

What's the best value on a ar case? Got a 16 inch barrel.

Attached: supreme.jpg (624x1242, 100K)

Cheap cloth cases just barely fit and they're $10. Cheapo hard cases start at $20 but usually are $50 at sporting stores and they've all been big enough to hold with scopes and shit still on.

I really hate hard cases because they're wider than my car and I can't just lay them on the seat and close the door.

>What's a reasonable cost for a first AR build?
A bit of a loaded question. Do you have any clue what you want in an AR? If the answer is know you should probably just get a PSA premium upper and some flavor of lower standard lower. With the PSA route expect 800 at most before optics.

>should I just get a complete upper for a first build?
Probably yes. Unless you have the tools sitting around and feel like doing it yourself, then buying a complete upper would be your best bet.

what do you drive

How come geissele doesn't sell their uppers in black on their website? I fucking hate FDE with a passion

Attached: 1407224720476.png (240x178, 4K)

you don't want their rail in the first place

peak zoomer

Attached: IMG_20180315_161601.jpg (1613x1210, 1.34M)

>Protip
A pair of small vicegrips with tape on the jaws is superior for installing rollpin on the FA.

Spray paint

Fifty shades of Fucking Dumb Everything

Took the new upper out for a test drive, it works. Handguard barely got hot after sustained fire from a rather think profile barrel. I like it.

Attached: IMG_20190620_205737866.jpg (3120x4160, 2.54M)

At 6.8 lbs unloaded, it's almost as light as an M16A1

Attached: IMG_20190620_205758333.jpg (3120x4160, 2.56M)

First was $580, Second was $700 and third was $2000. I feel dirty attaching that bipod to the Colt, it's meant for the Ruger 10/22 but I might keep it on. Can someone recommend a quality bipod for picatinny?

Attached: IMG_20190620_175751370.jpg (2048x1536, 1.25M)

ty
that was a good one

Attached: IMG_7674.jpg (1320x984, 394K)

just a boringly functional gun. Where have 1.93 mounts been my whole life?

Attached: Vaporwave Patrol Rifle.jpg (2785x1175, 3.55M)

That looks nicer than any of my rifles. Good job

Attached: congratulations[1].gif (80x56, 291K)

Elite iron

this yeet shit is almost as unfunny as ash

Magpul desu unless you want metal in which case Atlas

C'mon now, that dab selector switch was awesome.

Harris, Magpul. both about $90. The CVlife bipods are Harris clones but with that dumb logo on them. If you look hard enough you can find non-logo clones

>scope almost as big as the rifle itself
jesus christ why

>IT'S DOGSHIT
>LOOKS GREAT
Arg in a nutshell

Attached: 1560911786204.png (700x819, 318K)

Thats the cvlifestyle

Eye of the beholder

a third of it is the sunshade

I run a similar stock on my T91. I needed something robust, zero rattle, no nonsense for my shtf urban rifle build. All my ARs are gas piston.

Attached: 20190605_171319-2076x2768.jpg (2076x2768, 1.04M)

>cuck mags

LMAO

>no nonsense
>gas piston

Yeah i never understood the logic of it all, i live in California but i dont comply with ant state gun laws. Federal, sure, but state infringements can eat my ass.

atleast CA had one week of freedom to stock up and whatever mags they wanted, from what I hear gun laws arent even enforced depending on what county you live in. he must be NY or MAfag

>califag
That helps explain your rifle

>non nonsense shtf uran
>only optic is on a ksg that has no vfg
>pump action magfed "firearm" shotgun
>no flashlights on anything
Bro you just posted serious cringe