/arg/ AR Thread AR General

Recce Edition
Old:

Attached: IMG_20190521_1534143.jpg (4032x3024, 3.28M)

post your ammo ash

why should I unload all of my clips to post it for you?

post your ammo ash

if you want to get out of the worst trip of /arg/ position you'd better post your ammo

no thanks

Attached: Thatpaint.jpg (1280x720, 292K)

NewARfag here

Two questions:

1. Are magnifier mounts widely available for both lower 1/3 and absolute cowitness heights?

2. What's a worse compromise to you:
>Prismatic 1x (fixed power) optic:
>need to adjust the diopter to see the reticle as 100% crisp with glasses, but this causes the reticle to be blurry for other people who don't wear glasses who use your rifle (or you, if you picked up the rifle and had to use it without your glasses)
vs.
>Red dot:
>the dot in a red dot optic is a big starburst without glasses or a small starburst with glasses
?

i'll answer you if ash posts his ammo

Ill only post ammo if plasticguy asks me to.

Most are lower 1/3rd
Stop using cheap dots and the starburst will be gone

I have A1 lowers and A2 gray uppers. Should I use A1 or A2 furniture for the lowers?

>t.no astigmatism

What’s a good optic for this?

Strikefire II any good?

Attached: 3D9E0A99-9E51-4896-B21C-4DC261E8A6A1.jpg (750x555, 250K)

If he's got astigmatism it will look fucked if it's a red dot. My wife can't use red dots so she has to use etched reticles or Holo sights.

Use whatever works for you. Fuck anyone that uses your weapon.
Also, do you have astigmatism faggot?

If you take the MRO outside to actually use it, that tint is not visible. I've found that people who complain about that exact thing, have not actually used the MRO. Practically ALL red dots worth a damn have that tint. My PRO has a red tint to it inside, but outside (same as the MRO) it is not visible.

Aimpoint PRO

ACOG
Prism scope if you're a poorfag

American Defense QD vs. Larue QD?

Attached: 1477539032486.jpg (959x963, 216K)

No I have one and if im wearing glasses it only turns into a shitty blurry bunch if one or more of the following conditions are met
>poorfag dot
>brightness too high
>inside
>no glasses
Just dont be a fuck and it will be fine

this is you?

Attached: 2019.jpg (947x1200, 163K)

>Also, do you have astigmatism faggot?
Minor astigmatism. Red dots are like small starbursts, even with glasses. Not unusable, though, like some people who see double or big blobs.

Are there any 14.5 rifles that are lighter than the SR-15 but aren't flimsier?
the SR-15 is 6.4 pounds, the DDM4 V7 SLW is 5.9, noveske doesnt specify weight of their Afghan, bCM is 6 lbs... etc

qb building that 8 pound rifle is really freaking me out, I'm worried that lightweight rifles are a meme

Attached: 272C1334-A1A8-4DE8-9F25-EEFD5DE65EFA-982377.jpg (1200x900, 145K)

The starburst doesn't change for me whether I'm inside or outside. Stop spreading false information.

no

Get a T2

Find me one for $450 or less.

psa

>tfw want to post my rifle but everyone's gonna say it's an ash clone

Find it yourself.

Attached: 20190303_132618.jpg (3523x1410, 2.93M)

Post poorfag dot

Nice ash post

dude quit carrying what these fags say.

vseven

Fuck off

V Seven makes a 14.5" that weighs 4lb 9oz, but it comes with a Reddit stock.

tell Ash to post ammo so we can BTFO him for having no ammo.

kac is flimsier than vseven btw

He's gotta wait till his mom gets home from work to unlock the safe.

Did you hear abut V sEvEn?

>He's gotta wait till his mom gets home from work to unlock the safe.
KYS you skinny fat faggot.

>receives best possible suggestion
>Fuck off

predictions:
>nice ash clone
>lmao accupoint
>>no buis
it's basic, but i'm still working on it. first up is probably a larue trigger, then a light. tempted to buy a meme angled foregrip. might go with an ambi safety at some point down the line to see what's up with them.

Attached: raifu.png (1196x468, 1.47M)

he can't afford it

Attached: V7.jpg (467x700, 22K)

Ash is a faggot. Always assume you are better than him when you post here. Always assume that he is less than you when you post here

>nice ash clone
>lmao accupoor
>no buis

With a B5 stock it will weigh about 4lb 14oz

i actually really like the accupoint. it's exactly what i was hoping it would be.

nice rifle

Post your beat to shit $600 poorfag police trade in LMT defender

Holo sights are supposed to be better for astigmatism. I'm no doctor.

Posting my poorfag AR. Hexmag because they were $5, I haven't bought any mags yet or FCG.
I'm usually an AK guy but wanted something light. Not shown, optic and linear comp.

Attached: 20190617_175549.jpg (4032x3024, 3.59M)

Which Peltor Comtacs have the best hearing protection?

is that a polymer lower? texture looks weird with that image quality/lighting

No it's aluminum, I just painted it with a matte finish paint and the lighting is shit.

what does that weigh?

Sorry when you mentioned vseven I thought of SLR R*ddit meme garbage

Reminder that ash is a fat piggy with no ammo

:^

vseven does look very edgy but it is the lightest without drilling speed holes

For me I started with red dots and didn’t like the starburst effect, but I tried a 1x prism and while the reticle was crisp, the target image would be double when I was shooting with both eyes open. I could fix this by adjusting the diopter, but then the reticle would be blurry. So in the end I went back to red dots for strictly 1x optics, as the starburst was annoying but not so bad as to make me miss shots. And wearing my glasses fixed this anyways. I will say though that if you purchase a good LPVO, I find it almost red dot like at 1x, much better than a 1x prism.

he used the last of his ammo on the wall ND

trip on OC you no AR faggot

lol coped so hard on an expensive red dot his astigmatism went away

Probably about 4lbs unloaded and no optic.

>just be poor lol
no

yeah thats fine, the primary arms PRO clones are g2g too

trip off ash im sick of seeing your name

Got to shoot the elcan today, only complaint is that the center dot is too large for my liking. 62 grain lake city shot ok out of the lmt upper, but it is far more accurate than I am.

Attached: 20190622_105602.jpg (4032x1960, 2.22M)

Sell it for an eotech

Combat accurate friendo.

how durable are all of those meme alloys. like I know it’s light but do I have to replace everything in 5000 rounds

That’s rich coming from a morbidly obese NEET

probably every 50000 rounds if that

Definitely, plus with this short of a build I wont be reaching out past 300.

Attached: 20190618_210147-490x1008~2.jpg (1008x490, 231K)

make ash post his ammo

>trip off ash im sick of seeing your name
well then leave.

He probably has like 200 rounds at most. That may even be a stretch.

>Aero lower
>Elcan and LMT Mono upper
Why though

201 rounds actually.

post ammo ash

>has $500 ar, talks shit.

will there be july 4th discounts on ammo?

$501 AR actually.

Why vert grip while having brace?

Why not? Lower is a lower.

Attached: Nig og.jpg (1053x1982, 602K)

because its OAL is over 26 inches. So its a Firearm.

Attached: 1560450268851m (1).jpg (1024x818, 81K)

Got some buildup on my bolt. Anyone know whether this is normal or not? Last time I shot the gun it was doused with CLP.

Attached: IMG_20190622_114513.jpg (2250x4000, 2.09M)

If Red dot slightly starbursts, but it’s still a point of aim, should I just cope? How fucked will my accuracy be?

any action that directly impinges carbon in the action is garbage

>If Red dot slightly starbursts
You have an astigmatism.

Attached: Recce10.jpg (4032x1827, 1.72M)

Very normal. So normal I can tell you don't shoot ARs very much. Take the tip of the firing pin and scrape.

What should I buy if I don’t want to build

DPMS Oracle

>So normal I can tell you don't shoot ARs very much.
I just never cleaned them until I finished my newest build.

Already had it and to me at least a lower is a lower.

There was just a sale for wolf gold from brownells for 27c a round shipped. As for 4th sales there will definitely be. Speaking of which what is everyone looking to pick up?

Attached: 20190621_125413-1008x490.jpg (1008x490, 161K)

I need to see how much my 4th of july check from my mom will be before I decide.

Buy a complete lower and upper. You can cheap out on the lower and get some PSA complete and then get some decent upper. If the upper dosen't come with a bcg get a toolcraft.

Anyone?

Both are good