Does someone see whats wrong?

Does someone see whats wrong?
it glows but wont start i have swaped de core and the motherboard allready.

Attached: 20181117_111617.jpg (4032x3024, 3.58M)

Attached: 20181117_111608.jpg (4032x3024, 3.49M)

Attached: 20181117_111602.jpg (4032x3024, 3.45M)

does it post? does it give post codes?

Might be faulty ram?

no

shouldn't the ram be moved to the previous slot each?

move ram to a1-b1 slots; if that doesnt work, try with only one stick of ram in a1 slot

didnt work

>Intel
Found your problem.

user only has two slots used, those are probably the recommended slots for that board, if you only use two sticks.

Try a different set of DIMMs

Case is rotated 90 degrees to the right

Try just one stick of RAM in one slot at a time

noice
thanks for the serial number

See that little switch near the M.2 drive? Switch it back.

>Does someone see whats wrong?
You bought Jewtel.

dont do this, it produces zyklon gas

Never mind, figured it out.

did u forget you're risers :^)

Fuck off. That switch is for EZ XMP, and user has it set to enabled in the pic.