Is Jow Forums smart enough to solve this old puzzle that Dell used to send out to it's vendors?

Is Jow Forums smart enough to solve this old puzzle that Dell used to send out to it's vendors?

Attached: 20190219_103622.jpg (4032x1960, 2.15M)

>this is hard
no, it's not. kys.

Well can you do it?

easily, but i'm curious where can I get one of these for real?

i can see the solution right in front of my eyes lol.
You know that you have to look at the pieces, right? It makes things easier if you are not blind

I don't think anyone on Jow Forums can do this.

Some people have poor spatial sense. Most people could solve it if they had the physical pieces.

Ez just stand it up inside the frame

You can just stand it up inside the frame. Simples

As far as I know you can't find them anywhere, I just happened to find a couple.

based

Attached: tdavis.gif (200x234, 2.85M)

stack the pieces up in the frame.

I think this is right

Attached: Untitled.png (391x372, 8K)

Played Talos Principle I'll have you know

Attached: 1550594270681 copy.jpg (4032x1960, 2.52M)

Let's try this again. Plenty of combinations by the way if by the looks of it it really is a 5x5 field.

Attached: Untitled.png (224x224, 2K)

Doesn't fit

Attached: 20190219_105806.jpg (4032x1960, 2.42M)

Neither of these work.

That’s not what he drew, flip that top left piece horizontally

looks like it works to me

But they're already in the frame...

Your right but it still doesn't fit.

It's a 4.5 x 4.5 not 5 x 5

The pieces must be irregularly shaped then to make it only solvable in one way. Makes it a lot harder to solve from my end.

>5x5 frame
>4 pieces of 5 blocks
Shit puzzle.

that's just martin’s menace puzzle that dell rebranded
you can find them on ebay for like 15 bucks

Attached: MMPS.png (851x541, 761K)

Have you tried standing them upright though?

thanks doc

>cant manufacture parts that fit
>just jam them in there, who cares if it breaks
this is why Dell is dead and forgotten

This is fucking Battle Network levels of easy.

Attached: Untitled.png (500x500, 2K)

So this is how having 200 iq feels?

none of these will work, you're assuming that the shapes are unitary in such a way to fit when parallel to the sides of the frame
This is a valid solution
These guys are engineers

Can someone model one so I can 3D print?

Lmao this is great

Yeah thats it, didn't know it was a real puzzle of it's own.

Typical Dell.

>Jow Forums

its

Move the tw left most pieces so that they leave a 2*1 gap in the bottom right corner, put the top most piece as far to the top left, and the final piece should slot in on the right

>These guys are engineers
I get FinFET vibes.