How to request purchase advice:
pastebin.com
Jow Forums wiki headphone FAQ: wiki.installgentoo.com
Previous shit thread:
How to request purchase advice:
pastebin.com
Jow Forums wiki headphone FAQ: wiki.installgentoo.com
Previous shit thread:
Another thread another victory for BeyerChads!
whats over your ears, right now?
>triggered srax incels are so anally devastated they have to force their chink memephones into every thread
hd600
hi /hpg/
I got fed up with headphone cables breaking all the time and interference noise when a cellphone is close by
so I went full autist and bought a couple meters of Carbokab 225, the fanciest cable i could find without going into full blown audiofoolery territory
the problem now however is that I can't find a 3.5mm connector that fits both the thick cable and into the recess on my headphones
see pic related the Hicon connector is too large for the headphones and the rean (even with the lip at the end filed off) is too small for the cable
any recommendations for a connector that fits a 7.5mm cable and is small enough to plug into a 10mm in diameter and 6.5mm deep recess?
Pretty sure shielded cables are designed to only be used with grounded equipment, otherwise the shield traps the noise inside.
At least that's the case with UTP and STP ethernet cables.
wouldn't my dac/amp (fostex HP-A3) be grounded through its USB connection and the PC?
>small enough to plug into a 10mm in diameter and 6.5mm deep recess
maybe just widen it?
the hicon connector is 12mm in diameter so i'd have to shave off an entire millimeter all the way around
and I'm too afraid of weakening the plastic so much that the socket will break off
Oh no did all the byertrannies sudoko?
stax incels did
the koss boss reigns supreme
*squeals supreme
>what is WASAPI
>new amp that lets me take nice headphones on the go
I just need more portable headphones. I'm kinda tempted to get my T5Ps terminated in 4.4mm.
What amp is that?
I'm actually kinda amazed how my micro iDSD is basically the same size as my phone, bar the RCA plugs
Music that makes you cry?
everything heard through stax
>buying some shitty meme amp for substandard meme headphones to make a meme stack for on the go listening to meme music
>substandard meme headphones
that's not stax on the picture though
mdr-v6
Are koss porta pros the best quality of headphones you can get at around their weight?
Yes
name the headphones please
probably, they weigh nothing
had buyers remorse until listened to some lcd soundsystem, still, i think $100+ headphones are a meme
ur mom giving good head is a meme. didnt even get me to cum
stay mad
pretty much, otherwise you're looking at iems
samefagging stax incel is finally losing it completely
this is fucking garbo
Looking for headphones at the $50-or-less price point, for vidya game comfort and isolation. Considering:
>Audio-Technica ATH-M20x
>Edifier H840
>???
Should I get dt1990?
do you make music?
if no then no
Why cant we all juat get along?
Just* Fuck I hate my phone
/hsg/ devolved into shitposting central because DT1990 solved headphones and there is nothing to discuss.
Absolutely. They weigh practically nothing and actually sound good.
How much were these?
>tfw just drank coffee, then alcohol
why does everything sound so good
idk
Germans and Austrians have historically gone together pretty well alright...
But hell, I'll give getting along a shot with anyone with nice whisky.
They dont sound good, unless you are comparing to stock phone earbuds. Literal mudcannons.
I don't understand this koss meme at all. They sound like shit, uncomfortable, has zero isolation, and you can buy IEMs that actually sound neutral for this price.
This. Uncomfortable, flimsy, sharp sounding.
Listening to anything on STAX makes me cry
And not for a good reason
The meme is that they were good decade ago when there was nothing better. Chifi didnt exist and people mostly used awful earbuds. Once in a while you have a newfag who will dig decade old infographic, fall for kpp meme and shill it.
A decade ago? Just think what the difference must have been when they originally dropped back in 1984.
Speakeranon here. I will be getting into headphones. Going to dip my toes into this with a dt1990 but I also plan on getting STAX. I want to listen to electrostatic speakers, too. I’ve met someone recently and they’ve really shown me the way...any suggestions for an amp?
DT 770 Pros
first pair of decent headphones and I like them, Very comfy
Can someone explain to me why earbuds use these? This shit is always itchy
better grip and seal
What is a good sub £100 amp for Beyerdynamic DT 990 (250 Omhs)
I'm thinking one of the low power Fiios
fiios fine
First for summit-fi
dt990 sounds like shit anyways
i got a secondhand fiio e12 for 45 dollars, did the job for me back when i had 990's
it did have a scratch on it, but since it's low budget i didn't mind
rated higher than hd650 in harman blind tests
>Sean "everything is FR" olive
No thanks
It's a good headphone, intentionally v-shaped, now the DT1990 which I bought as a replacement was pure garbage.
HD600.
What's your setup like, user?
Who else about to enjoy their Stax?
with the hd600 its an ol dac to little dot mk3 or jds atom. My other primary set is an audio gd r2r 11 to aeon closed.
its my birthday on the 26th and i'm trading in my GBP's for a pair of fidelio x2's
Is it possible my headphones sound better with my motherboard over my amp, or am I imagining things?
Using HD600s
Amp is Fiio10k
Mobo is z390 pro wifi
Pls help, i know nothing about this shit
how else is he supposed to tell everyone he's a virgin lmao
>the DT1990 which I bought as a replacement was pure garbage
Things that never happened.
Since its my birthday in about 3 weeks i'm trading in my GBP's for some Fidelio X2's after having these for over 4 years.
Pretty excited for something new
external amplification units are a meme so of course it sounds better without one.
Thanks, famalam
if the motherboards internal amp is good then yes.
otherwise it won't
higher impedance headphones are going to require more power to drive to higher volumes, and the quality is not necessarily linear.
you may well find that high impedance headphones will lose their bass or other aspects of the sound quality if the power supply isnt enough.
this is talking *very* high impedance, like 150 - 200 ohms.
those HD 600's with 300 ohm impedence are going to require something nice to drive them up. IMO I would go for the RME ADI DAC 2 pro but it costs more than the cans so obviously not for you.
if you are getting dope headphones - with high impedence you are not gunna wanna skimp on your amp - however you could also get very high grade cans that arnt 300 ohms - maybe not for the same price though.
however, the setup you are describing - if you have no other experience with peak grade audio, will probably sound magnificent!
Nice post purchase rationalization.
the post isn't about stax though
Both DT1990 and STAX are colored ear-rape garbage.
harmantardon, your days are over already...
I just got my Little Dot MK3 today. Are Voshkod 6ZH1P-EV a good start to trying out different tubes?
my favorite are the Sylvania 5654 also this is a pretty good list of tubes for the mk3
head-fi.org
Anyone else get the monks from massdrop? Got some in yesterday and I'm digging them.
Thanks a bunch. I'll order the Vosh and Sylvania to play with and keep reading the guide. Now if I understand it right, I'm just upgrading the power tubes and leaving the driver tubes alone?
I tried various models at e-earphone, they're uncomfortable, fragile and sound lackluster.
nostax yottacels on eternal suicide watch lmfao
what listen you on foneheads user
oyaide connector is only solution
it fit cable up to 6mm diameter so you will need to remove outer isolation
moon-audio.com
$600
source?
nvm
>vlc
WHAT'S GOOD HOMIES???
yo yo my ethnic friend
>3dpd
>bunch of inexpensive, shitty headphones
>no HD600, no STAX
user, you break my heart.
So I want to try one of these armature iems, tell me what's good Jow Forums.
>Budget
$300 if it's enough. How do these darn things cost so much?
>Location
Murica
>Source
Phone and bluetooth wire in future, so detachable cable is mandatory
>Type of headphone
Balanced armature IEMs only
>Open or closed
Sealed shut
>Comfort level
I want it deep
>Sound signature
Neutral, but raised highs ok
>Past headphones
They will replace Etymotic MK5 in case my surgery to replace their cable fails or if they are better. Do I just go for ER4 and be a brand loyal bitch?
ath-msr7.
there's nothing more cringe than alcoholics like you posting your liquor bottles like that on the internet. nobody thinks you're cool except other alcoholics