Post 'em
/speccy/
Nathan Peterson
Levi Cox
Ethan Diaz
Nathaniel Thomas
Zachary Fisher
R8 & H8
Kevin Walker
>Intel
>No optical drive
5/10
Levi Rodriguez
Blake Wood
David Campbell
Dominic Martinez
cringe/10
Matthew Murphy
I think my legs are about to catch fire lads
Lucas Moore
based/10
Henry Murphy
I use an external one man, since most cases i like don't have a place for internal readers, also i am really eager to get an r5 2600 but most people are telling me to wait.
Anthony Richardson
Found the jew posting from his cash register
Bentley King
upgrading soon to maxwell titan x because last gpu that actually supported DVI-I
Brayden Hall
Juan Howard
Brandon Ward
Aiden Williams
Jaxon Hall
My laptop
Charles Wilson
Speccy shows the 9700k as a 7700 for some reason.
Jacob Turner
R8 H8 B8
Dylan Taylor
Has that piece of shit Speccy finally updated to show modern hardware with more than 8GB of VRAM or 9900K's?
Connor Collins
Can't wait to slap a 3600/3700 in here and resume comfy.
Bentley Flores
Going to upgrade to a 1660ti and either a 6600k or 7600k soon.
Adam King
>FX-8350
>in current year
Xavier Allen
>hard drive temp is red
What's going on there user?
Lincoln Flores
Jayden Long
Performs great if you are not a shittard that plays at ultra or 4k
Parker Cox
Based Kentsfield, a friend of my uncle is wiping the hard drive and giving me his old rig with a P5N-E SLI board in it, not sure what CPU it has, but it can have a Q6600.
Leo Collins
Good luck with the nvidia chipset.
Parker Roberts
Jason Perry
new lappy :3
Alexander Walker
Finally had to go to 12Gb, can tell the difference generally. 8Gb DDR3U new-manufacture Aliexpress stick swap.
Dylan Gomez
Thin PC build
Robert Brooks
It's not worth upgrading this pc anymore, so i'll just do a new build in a year or two.
REEEE
Christopher Collins
Still a really good 1080p rig until PS5 and shit comes out.
Jacob Bell
muh ram
anyone with fast ram is ok in my book, even intel fags
Evan Allen
Oddly enough, FX chips don't give a fuck how slow the ram is, maybe because the ipc is so poor, but I don't know why my cinebench barely goes up as I crank the ram multiplier.
Zachary Butler
Consider OCing NB and HT bus.
Josiah Watson
I normally use a 225 bus with 1800MHz ram when I'm running it at 4.5GHz, but the score isn't any better than 200 bus with a 22.5 multi and 1866 RAM.
My HyperX ram does do 2005MHz stable on memtest with default 1.5 voltage and a 215 bus speed, which is fantastic, but 1800MHz ram with a 4.5GHz core speed is normally what I roll with.
Jace Young
Sebastian King
Please tell me that ram is 2400Mhz and not 600MHz like speccy is suggesting.
Bentley Jenkins
>Dat HT link
I also can get my generic Samsung sticks to ~2k-something MHz. No voltage or timings loosening help to go past that.
I can increase multiplier to 22, which will get me to the ~4.75 GHz at 1.475V, which will be stable enough to play gaymen, but those are diminishing returns and it gets HOT during summer.
David Barnes
yup it's 2400 mhz
good guess.
Tyler Morales
>1.475V
FX gets really hot on air once you hit a.1.45 or higher, I can hit 4.5 at 1.4v, but I'd need 1.45 for 4.5 because 1.425 would not work under prime. I've got big a Hyper T4 cooler and 1.45 is still to warm.
I don't know how my Ht link goes that high on stock voltage either, I don't know if my Gigabyte board applies the load line calibration to the NB as well, but for what this board cost back then, the overclocking was amazing.
Yeah normally speccy divides your ram speed by 2 but in your case it divided is by 4 for some reason.
Thomas Lewis
>1.45 for 4.5
for 4.6**
Henry Scott
Funny thing about AM3+ boards prices:
So initially, in 2013, I bought Asus M5A97 Evo R2.0 for my build. In 2017 stopped booting normally, dudes in closest computer shop knew shit and diagnosed it's condition no better than me, so I assumed it's dead (or still lying in comatose in the box). So I bought a used Sabertooth 990fx - paid $100 for a 6 year old board. Guess what, now it sells for $150 in my area.
Landon Gray
Oh it's insane what's going on with AM3+ boards, there was a time where I was getting new in box 990FX UD3 boards for like $120 but now it's damn near $200 if someone happens to post on on eBay, which is a shame because the price of an FX-8350 brand new is super low, two 8GB 1866 HyperX sticks that I have are now under $100, but a good overclocking mobo like the later revision UD3 is the deal breaker.
Ryan Collins
Yeah, money you mentioned will get you a decent brand new Ryzen build nowadays. And the aforementioned Gigabyte and Asus MBs are very nice ones, but definitely not the best. So who will spend so much dosh for these? I'm convinced that enthusiasts will hunt for Crosshair V Formula or this behemoth.
Ian Watson
Roast me
Nolan Stewart
The ASrock Extreme9s and Crosshair formulas had amazing VRMs for FX even back in 2011, the VRM on the midrange 990FXA-UD3 was trash until 2013 when revision 4 came out, but the sabertooth 990FX had a good VRM from the start.
High and non mainstream socketed intel rig from 2016 that still has strong single core
BARELY PLAYABLE
Blake Miller
idk, but it's been pretty hot the past few days and the M.2 drvie doesn't have a heatsink on it and there's no case fans in my case (RVZ02 MITX case), probably why, don't notice any slowdown though
Nolan Wood
>Windows 10 Educational
>Haven't overclocked his monitors
What are you, some sort of casual?
>Refurbished. 90% new.
>Shenzhen, China.
I wonder what are those 10% are.
Wyatt Thompson
Hudson Morales
>BARELY PLAYABLE
Luckily I only play 2d platformers