In /csg/, we discuss the cheap shit you see on AliExpress, Banggood, eBay, Gearbest, Taobao and similar sites.
>News • SJ4000 action camera makes user happy • Kobo Glo e-reader arrives • user recommends QCY QS2 IEMemes • A bag of mechanical switches • Halal mousepad • "It keeps happening" • Mi Band arrives • "Mice" • "Dear friend" • Chinked • "Please understand" • Chinked 2: Hard Edition • user doesn't know • Chink phone cases protec • "Thank you, dear friend" • user destroys his TRN V80 IEMemes in the name of science • "My product no problem" • Chink camera sensor comes wrapped in toilet paper • YANWENed • "3.6 roentgen" • user warns about phone case Previous thread (and some AliThots)
you should get rj45 tester. also are you getting gigabit cat6 / cat7 cable? dont want to be stuck with 10/100 when you could have 1000 in future. aliexpress.com/item/2044442346.html
Jonathan Young
The cable is cat6 but it seems strange to me since it is flat and cat6 needs that shielding between the pairs.
Camden Butler
then it's obviously not cat6.
Samuel Cruz
Oh and by bugs, I meant the spying kind, not errors in the jacks.
Justin Flores
Well maybe it could be a weird shield flat between the pairs maybe instead of the X-shaped shield in the round style of cable.
Dylan White
>I meant the spying kind Are you dense or just memeing?
Adrian Richardson
Has anyone bought thinkpad battries from aliexpress or ebay sellers in china UK prices for them new are insane
I add more items to the cart and it forced me to pay 6 USD for shipping. No matter if I buy 6 seperately it would be the same, at least they can send it to me in a proper manner instead of this shit.
Adrian Flores
that price looks too good to be true, probably lower capacity
Dominic Myers
When your options are - Free: Yanwen Economic - $2: China Post Registered Airmail Paying for shipping is a big brain choice
Owen Miller
does anyone have tablet recommendations? Should I just get a mi pad 4 plus?
Joseph Peterson
>pay 2$ extra for shipping to get registered airmail >package is sent with yanwen regardless
Landon Ramirez
>what is dispute
Xavier Gray
any good emulation consoles? also are the cheap $3 snes controllers ok to use
Cooper Johnson
The Lepin Mustang arrived. (The Lepin logo is on the booklet but covered with a generic sticker, pretty funny.) Holy shit it's a big set. Much larger than the Beetle I built previously, and for not that much more money. The pieces also seem of better quality than the Beetle kit, although I already found one that wasn't molded correctly. Hopefully there aren't too many bad pieces, but this looks like it will be a ton of fun to build.
I'm not going to pay 2 dollars shipping on a 70 cent ding dong
Ryder Martinez
I don't know what those words mean, dear friend.
Samuel Perez
Are there ANY good chink 18650s?
Chase Wright
Take your old one apart and replace the cells.
Benjamin Campbell
what is that sun face logo? is it a sticker to cover up the lepin logo?
Dylan Kelly
Yes
Jacob Edwards
oh i see you mentioned in the first line of your post
John Morales
they are godly user
Alexander Powell
are chink 3d printers worth it? i want to print an ssd cage for my camera since theyre usually $80 for the metal ones
Chase Cruz
They are the only ones that are worth it, really. All western ones are overpriced. Chinks have a lot of i3 clones, some of them at really reasonable prices. Chink ones usually come in disassembled and may have some defective parts, so it's not a good option if you don't have any experience with these things.
I got Creality CR10 to print cosplay parts a couple of years ago. Works really well, came partially assembled, no defects. Replaced all the fans with quieter ones, added noise dampeners on the motors, added PEI sheet on the bed. My main complaint is that bed leveling by hand is a bitch, and such a large bed will never be completely straight.
Levi Barnes
YES
state your budget and want you want to make though
Juan Cook
up to 1k for everything excluding filament. ideally levelling bed (since i hear they needed) and ideally can do a high dpi (idk the 3d printer equivalent term)
John Perez
>Lepin Mustang Link user?
Lucas Russell
oh and like i said, 1st thing is ssd cage, then maybe print some "anatomy models".
It does up to mid sized prints, has ABL straight out of the box, and there's an actually decent support team you can contact if you need help.
Bear in mind, that, excluding FDM printers that are hot garbage, FDM printers can only print that much detail before problems start to arise. If you e.g. want to print a figurine, you'll have to use a smaller than usual nozzle, a low layer height, which, although increase the printers capability to print more detailed parts, increase the time that the print takes to complete dramatically. If you want to print figurines and stuff like that, just go for a resin printer.
Depending on how detailed they are, and how small, you might want to consider a resin printer.
If you want to spend less than 799 on the i3, because you're not sure how useful a 3D printer might be, I can suggest you a less expensive one. Also, it'd be good if you specified how big the print volume you want it to be.
Jack Lopez
Just search for 21047, that's the reference number for the official Lego kit. Here's the listing I ordered from: aliexpress.com/item/32988210336.html
Thomas Perez
It would look like shit and make using normal cables difficult.
Kayden Miller
Not that user, but Ali Standard Shipping only takes 1 to 2 weeks to arrive at my front door as opposed to the 6 to 8 weeks for China Post or an eternal wait for Yanwen. If I need something fast or buy something more expensive you can bet your ass I'll spend €2 more for Ali Standard shipping if it isn't already.
That shit is slow and forces you to use a case. I stopped using mine after a week in favor of using my quick charger once every other day.
Andrew Foster
I'm pretty sure you can't use third party batteries with anything after the **20 series without modifying the bios
Jayden Rivera
thanks, good idea investing in a proper QC tho
Cameron Price
ssd cage is quiet small, and i guess 30x30x30 would do for now, room to expand would be nice. inform me on resin printers please
Easton Hernandez
I am not an expert on resin 3D printers, but their prints tend to be more brittle, their build volume smaller (for the same budget vs a FDM printer), and the resin is quite nasty and the prints need to be washed thoroughly before you can use them.
A typical FDM 3D printer will usually have a build volume of ~200x~200x~150-250
Cooper Cox
when will jack mao ally with king john hung and shinto abe to bring us chink goods from new and exciting chink lands
Hunter Morgan
Only if we can hang Jung
William Barnes
What would you guys recommend for an e-ink e-book reader preferably
Levi Johnson
Any recommendations for a simple MP3 player (for running)?
John Adams
what's the go to chick tablet?
Brayden Allen
Unironically this, my Pi 3 plays up to PS1 games perfectly. N64 is hit-or-miss but every console below it works perfectly.
Blake Jackson
Does anyone have any idea how to set up the first generation wifi extender? I've spent most of the day searching for a way since mine got reset by accident but every tutorial I got was for the second gen one.
Isaac Brooks
Mi Pad 4
Nicholas Phillips
>Mi Pad 4 thanks sir! any recommendations of where to get?
Shipping is relatively fast from China, Russian warehouse option with IML post office collection, CDEK etc etc, no toll customs limit (2000 euros or so, unless it's obviosuly for resale uses),
That said, you can get chink shit instantly and easily if you go to a store like Okey, I got a HDMI cable there once for relatively normal price and no need to wait for shipping - same thing with other items like Edifier speakers, just Russians going to Yandex.Market, but also many buying from AliExpress - so much so that even popoular songs are mentioning the site.
I see the picture is some anime put in the post-soviet blocks where you can see who's poor (who has painted and upgraded their balcony), and who doesn't - with the trash and terrible scenery outside. Just how I remember Russia, and just a picture one would find on dvach. youtube.com/watch?v=2dw9A29xCuk
Nicholas Hall
That's at least 15 top of the line cells. Hope you are willing to spend at least $100.
Jeremiah Hernandez
it means you go to porn websites, you filthy masturbator