Handgun General - /hg/ - #74

Closest gat that I have to a 45

Attached: M57-GP5.jpg (3969x2485, 1.58M)

What i use to protect the house...plus a bunch of other stuff but this is what comes out first.

Does anyone have an opinion on this tlr vs a surefire x300 which do you prefer?

Attached: IMG_20180328_092855.jpg (2048x2730, 1.21M)

>surprised Keltec still talks to him
Someone has to be nice.

He's sold so many PF9s is probably why they still talk to him.

Both are good.

Attached: p30l_bk7.jpg (2967x2793, 1.92M)

I'm not a big .45 guy, but I really want to get my hands on one of those Cajun Gun Works 97 "E" conversion guns. The work they did on my 75B was absolutely outstanding.

Attached: New-97BE-Pics-009[1].jpg (640x480, 90K)

Does Les Baer make the sexiest 1911s? I think yes

Attached: 1911 hngg.jpg (799x536, 47K)

357>45

Attached: IMG_20180328_124348_01.jpg (800x600, 44K)

Correct!

Attached: IMG_20180328_095054.jpg (2048x2730, 1.24M)

Is Burris Fastfire the most poorfag reflex sight option that's still decent quality?
It would be for a Ruger 22/45

Attached: 1519170298974.jpg (640x500, 59K)

Get a Chinese rmr clone for $30.

Seriously?

The Burris is good to go.

I had one on a Mossberg Shockwave and it held zero through several boxes of slugs.

Seriously.
I have one on top of my trijicon acog clone. I love both of them.

Neat. I actually wanted to try how I liked shooting that way before putting a bunch more money into it. It's not like it's gonna get thrashed around much on a .22 anyway.

My favorite handgun. An old Webley.

Attached: 20180328_112243.jpg (2560x1440, 1.78M)

Yeah, particularly the II if you can still find 'em.

Attached: fuddies.jpg (2200x1467, 673K)

So I completed my first online handgun purchase this morning. Gave the seller my FFLs info and they said they'd take care of everything for me. On the website it already has it listed as fulfilled and my FFL says they talked to the online store and are expecting the package. When I go to pick it up it shouldn't be any different than buying a gun they're selling themselves right? Excuse my autism but I do worry the steps and details in any process. Especially one that is so new to me.

All you have to "worry" about now is to going through the background check and pay the ffl for the transfer.

Its the same 4473 form. One dealer had me sign something saying that all responsibility for compliance with state law is on me. It shouldn't be an issue.

Yep, same process from this point.

When the gun gets to your store, you'll go in, fill out a 4473, pay for a transfer, and if your NICS is approved walk out with your gun in 15 minutes.

>walk out with your gun in 15 minutes
Mine is usually in 5.

Thanks!

You're quicker than me at filling out forms

Did someone say .45??

Attached: 1521512078370m.jpg (1024x685, 71K)

Does this count as a fuddy five?

Attached: JPEG_20180328_143107.jpg (5344x3006, 3.38M)

wtf are those grips on the top right

.45-70?

.45 AARP stronk

Attached: 20180310_185355.jpg (2560x1440, 1.92M)

Old Carbon Creations blue carbon fiber grips, I think they went out of business.

Attached: IMG_1788.jpg (2000x1333, 528K)

Waifu chambered in fuddy five

Attached: 20180327_200834.jpg (4032x3024, 3.6M)

Arr there, just want to know, is that exist some "non-lethal" bullets for 9mm ?

I live in a country where for defending your home, it is really recommended to do a sommation shot before really shooting (objective is to know if the guy is really hostile, in the law). However, if you shot the guy with a non-lethal bullet, it's work as a sommation shot, and that hurt him severaly in bonus, so the police recommand to do that.

I was using a 12 gauge until now for home defense, who have this king of ammo, but if I want to use my 9mm, is that kind of bullets exist ?

Attached: hd.jpg (1000x668, 474K)

Yes

Attached: 1FA92F23-8A23-463D-99EF-D45462275D48.jpg (1500x1124, 545K)

More like FUGLY FIVE

Yes

Attached: Screenshot_20180328-123432.jpg (1440x2960, 730K)

I get all nervous and shakey when I fill them out for no apparent reason, plus I have horrible hand writing..

Print out a stack of them at home with all the necessary information already filled out.

In all honesty some of the custom long slide 1911s from someone like Republic Forge are gorgeous

yeah boi

Thanks !

Holy shit me too

My .45
>yo homie is that my briefcase
>mfw every time

Attached: image000000_03.gif (137x75, 309K)

Shitposting drunk

Attached: IMG_20180316_130422_01_01_01.jpg (1976x1680, 723K)

>2018
>not loading .45 super to nearly .460 rowland levels
It's like you guys aren't even trying to glocknade your guns

Attached: A24E6474-Edit.jpg (1920x1280, 1.79M)

My semi interesting first pony gun

Attached: 20180328_160952.jpg (4032x3024, 3.37M)

I don't nervous when filling out 4473.
A bit nervous when handcuffed on the side of the road behind my car with my gat on the state troopers bonnet. Because spending ticket.

What did you spend your money on to get a spending ticket?

I fill mine out pretty quickly, but I also run them sometimes too. I'm not nervous with it, but most that I have run are.

Attached: matched pair .jpg (3828x3006, 1.7M)

>spending ticket.
Do you mean receipt?

No, he meant speeding.

Oh shi.
Curse you phone! Incorrectly corrected again!

S/B speeding ticket.
Spending would be a lot more pleasant.

I get people whose hands shake when you hand them the gun. I go out of my fucking mind when they can't figure out how to release the slide with the mag inserted.

Never understood being nervous.
It's a normal and common thing to do, buying funs.
It's the entire point of the fun store and the clerk.
Everyone is there for the gats. Only need to be nervous when you're buying bulk power and asking directions to the hardware store that sells pipes and nails.

A spending ticket sounds like fun.

Attached: 20180207201014_IMG_0918.jpg (2400x1600, 1.39M)

What revolvo is this

hi k, i did a #. on my rear usp sights changing them out. i tried to polish/sand-off the edges, but it still does not look right, i am not too concerned because i did not do a horrible job, i just want to scavenge around and fix it myself. does anyone recommend Ferritic nitrocarburizing-like spray or paint can i use spray paint? is my gun fubar? i basically used an old 1920s cast iron vice grip/hand clamp vice and padded it up with electrical tape both on the upper of my gun, as well the grips teeth or plates. my breakfast table is pretty fucked.

tl;dr i banged up my rear sights punching them out with an improvised flathead-screw driver as well as banged up the right slide grip-serrations, tried to sand them, no luck. what do?

....

Attached: i7865iuogknbmh.jpg (500x475, 84K)

Might just have to deal with it f a m.

Yep, I've seen that a lot.

to be fair, it uses the exact same action as the PMR, and even though keltec fixed most of the issues with that, the CMR just chokes and breaks constantly.
If the CMR worked flawlessly, I could see it being interesting.

are there USP models in .38 super?
If not there should be.

Post pictures of fuckup. Then go buy some tools.

>Fuddy five edition
Hell yeah, it's Mk23 range day baby

Did you even sleep? Also, still up for the challenge of making a holster today?

Had to get up to do PFD and shoot stuff

More funner than what they are making me spend on the ticket.
I could get a nice new gat for the money.

Repair damage to serrations and stuff with a set of wee files.
Take your time, be patient, don't try to rush it. You can't put back any metal you remove because of the damage, but you can restore the original lines and edges.

Attached: 0030238-23.jpg (600x277, 110K)

please post pictures, i'd like to laugh at you

What stuff did you had to shoot?

>LOVE the 1911 aesthetics
>tfw 8+1 capacity in a fullsize semi-auto in CURRENT YEAR feels inadequate
>10 millimeme always tickles the prostate
>find a compromise

Woo boy, am I mirin. Is this one of the newer makes or the classic? Have you fed it big boy loads yet?

not op but iirc the delta elite doesn't have full case support so it's not a great idea to shoot hot 10mm

Get a double stack 45

What it do hgfam?

Attached: 628484te6r8g4d65fg46df5g4.jpg (1466x1426, 531K)

Had consistent FTF today with my bought-yesterday mark iv lite. Pic related is what every round would look like after it got stuck when fed from the magazine.

I should note that after going through a box of 22 and opening a new box I never had a FTF for the rest of the night.

Attached: CD4ACA2F-3B84-4EBF-B776-23CC75E03ED7.jpg (3264x2448, 908K)

Uh I should probably say: has anyone else had this problem, and were you able to fix it?

Damn those things got chewed up. What is the ammo that kept having feed issues?

Attached: 685424t6y54er6g54ef6gh54ef68h4.jpg (1210x1613, 893K)

Killin, chillin. You?

Attached: 20180328_151057-3024x1701.jpg (3024x1701, 1.31M)

$500 to buy a cc pistol, what should I get?

Whats the point of a mounted flashlight when you can carry a flashlight and save the mount for a laser? It seems like the much better choice all around.

Px4 Storm Compact

Just bought a cheap lower for AR, nothing much.

might be the solid lead, don't underestimate how much can fuck up when a little bit of lead gets nicked on it's way into the chamber. the bullet itself is probably not identical to a copper equivalent in size either

some pistols just don't feed certain bullets, 1911s in my experience are extremely finicky based on the shape of the actual bullet sticking out of the cartridge, 1 of mine can't feed rounded 10mm for shit and only eats flat tip JHP. probably not relevant, if your pistol usually eats that idk.

Blazer Brass.

I should also also mention I got it cheap. 100 freedom dollars for 2500 rounds. I’m starting to think there’s a reason I got it first low

Finally enjoying some Spring weather for once.

Attached: w65t4g6s5dg46ds5fg4d6f5g4df65g4.jpg (1294x1950, 722K)

Walther PPS M2 or a Sig P320 full size (with a future purchase of a subcompact exchange kit frame and barrel)
Which one is best for a noguns looking for a HD and CCW? PX4 looks promisimg but I haven't tried it out.

Attached: 0007568446_20.jpg (902x902, 206K)

go back to the skeet shooting dreams

Attached: sig axe.jpg (2496x2259, 1.18M)

Hey guys, considering P30L as my first handgun, is it worth it for the beginner? Or should I start with something cheaper as Glock or CZ?

Buy this guy's Beretta PX4 Compact for $350. Comes with 5 clips.
northwestfirearms.com/threads/various-handguns-for-sale.265091/

Attached: Px4 1.jpg (1600x1200, 275K)

>clips

Get your terminology right, satan

Hell yes, it's almost short shorts weather

Two hands on gun, and there are light/laser combos if you feel frisky. You should carry a backup light as well

Attached: 20180328_153907-1701x2552.jpg (1701x2552, 850K)

hotnewt.ru

Will do... I am not a conplete idiot with tools now, this is pretty good with someone without a bench, real vice, etc., so... :^)

Attached: FUD.png (1358x1287, 2.04M)

honestly not that bad just get some oil and file and grease that ass.

also,PROTIP, you can put a USP upper frame into any vice grip and as long as you use your hands, that bitch will not bend or mend. STRONK Stuff. Same for P2K and P3K aka p30. for messing with sights on a striker fired pistol, i would 100 percent use a sight tool.