AR thread/ARG/tripfag containment

Lately Deadair, not sure which specific model.

How many people own deadair, I know for surefire there's at least five of us.

Should I bite? This is for sale for a grand

sorry, forgot photo

Attached: 5afd763511937f0024941e93.jpg (1024x1024, 151K)

[Funny joke because lack of pic]

WGWS
FaggotManure
BLACK, but I don't recall for certain
user
That's all I can recall for now.

What do you get for a grand? That whole rifle?

yeah, ill put info once he gives me.

>Woodland plate carrier for $200
I need it.

Attached: Screenshot_20180517-105819~2.png (1080x995, 421K)

I own a SiCo can.

you need 3 of them, then youll be like a land battleship

SUREFIRE CONFIRMED FOR ARG'S CAN OF CHOICE

Attached: 20180507_193130-4032x2335.jpg (4032x2335, 1.68M)

KYS you dumb spic. I just nutted all over a pic of your sluty sister.

How do I get my AR bolt to rack this smoothly?
youtube.com/watch?v=UZF5YNNPc7s

Does it just come from shooting? to be fair I haven't shot my AR much. maybe put about 300 rounds through it.

I put a fuckton of CLP on my bolt and it doesn't rack nearly as smoothly as that.

Maybe the full milspec m16s and ARs are just better fitted?

six

cryptic black

What part of this would you want to own?

Does it actually hold plates? That looks an awful lot like a soft armor carrier.

My bad.

Solid film lube inside receiver, phosphate BCG and a good lubricant.

Uncoated receiver and nitride BCG is the scratchiest most snagging thing I've seen so far.

What a waste of white seed

>Does it actually hold plates
The carrier was designed to snuggly fit United States Standard Issue SAPI cut plates. The bags were built to accommodate "thicker" plates but they will not fit plates that are NOT cut to the SAPI Spec.

No biggie.

T2 tomorrow, boys

I thought it would be the other way around since nitride is slick and phosphate is relatively coarse

Nitride is a very hard surface so there's not really any give to it and oil sits on it and is able to move freely on it with the slightest influence. Whereas the phosphate is a bit porous so it holds oil better, one of the reasons it was selected for use. I know it sounds cliche but I wonder if a nitride BCG would run better with a light grease VS oil so it's able to stay in high contact areas instead of running/ flying/ being pushed off.

DO people unironically buy these things? Assuming your rifle wasn't put together by an inept retard, the odds of you having a baffle strike are basically zero.

good question!

hmm..

uhm..

*cough*
ah..

ill g-get back to you on that..

>(((SUREFIRE)))
Checks out honestly. Pretty sure we are the majority here.

Attached: KACSR15.jpg (2304x1296, 882K)

>T2 tomorrow
No thanks

Qd sling swivels and A2 grip today.

I just got an ACOG for my SR15 yesterday, and I'm waiting for my RC2 to get approved. Pretty similar rifles

Attached: IMG_4260.jpg (3264x2448, 1.51M)

are these sounding rods? are they any good??

huh. that actually makes sense. I do have a PSA rifle with phosphate BCG and an uncoated upper reciever so that would explain it, and oil does kind of tend to do absolutely nothing to making it smoother. Haven't had any jamming issues with it though.

would a nickel boron BCG work better?

Nice Ash clone.

>A2 grip today

Bigger no thanks

Sick burn, post ar

Are you being retarded ironically?

Pic-related, it's your AR

Guyslee or Radian CH?

Attached: IMG_20180516_142516573_LL.jpg (4608x3456, 1.81M)

rabtor is gud

Geissele

Address that rail and you'll have a baseline standard /arg/ rifle

Soon.jpg

URX 3.1 and you'll have a pretty decent rifle

He will be able to save max $60 toward a rail

True

There's like a 1/5 chance user is White.

Should I put my extra bcg in anything? Like wrap it up?

Everyone knows that all Anons are 6-foot 4 230 lb of pure muscle blonde hair blue-eyed pure Aryan that make 600 billion dollars a minute

all this sour grape tho

Ash will have one of the best ARs here when he gets his sopmod and rail. Prove me wrong.

he already got sopmod ya dip, crawl out from your basement some time

Did Ash even get his B5 sopmod or was it a lie?

>Pretty similar rifles
funny af considering the Insight WMX200 was the light I originally wanted for this rifle. Life happened and years later they're retard priced.

like 14 posts up you dinguses

Does he have the MK14 yet?

no lol that I don't think he'll get, since it would require the attention span and discipline to save more than $60 at once

The black ones aren't as absurd as the bronze ones. I just wish I had the fixed body mount as well.

What's worse is waiting for the form 4 to come back for my can

?

>save $60
What did he mean by this?

Stripped aimpoint pics next thread maybe.

what do you think dumb russian, Ash can't save more than $60 at once without losing his attention span and spending it on some marginal replacement small part for his AR

How did you get your PTSD, user?

Attached: 217E1E78-2CBB-44EF-B07F-E23E80DD5C74.png (750x1334, 403K)

Well I do have an extra BCG for no reason.

Brother was murdered and scorched to a burnt tendie by a family friend when I was a childfag.

Why?

I have 2. Having extra BCG's is good practice.

MI is releasing a new rail.
Will they be relevant now?

Attached: 98C4B414-78E7-4E34-9BAD-5FE92F94FE42.jpg (640x480, 65K)

No

As relevant as they've always been

For all you fags who painted your rifle. What paint did you use? Was looking at all the spray paint earlier, couldn't decide which one to get.

Attached: IMG_20180516_175154990_LL~2.jpg (1105x1915, 403K)

Rustoleum's superflat camo paint

Attached: 20180514_154905.jpg (1595x998, 879K)

But it looks like they figured out how to mount a rail without glue!

They've had that set up for a while now, you still use glue. I got one for my AR9 build.

Attached: received_10154636358216454.jpg (1196x2048, 135K)

How's it feel after it dries? I keep hearing how the paint is usually sticky for some time.

They now have a plate that indexes on the groove in barrel nut. Like the big boys.
Gen3 barrel nut didn’t even have a groove.

It did feel a bit sticky/chalky for a couple days. But once it's fully dried, you don't even notice it. Could probably speed up the process by baking it, or having it sit in the sun for a while.

Sweet, ty. WA fag here, every time I go /out/ the rifle sticks out so much because of its color (Black) wanted to blend in more. Plus earth tones are more appealing to me.

You're right about the groove, and the improvement. Gen3 did get an indexing plate, it was just a small piece with tabs that went through the adjustment fasteners. I'll probably be getting one of these, if not their lightweight rail and I'll report back when I do.

Rustoleum camo paint from literally any store.

Krylon/Aervoe are also popular options. Any flat paint will be fine though.

This map might help you decide what colors to get.

Attached: BfDFxKq.jpg (732x446, 241K)

Most of the paint is off the optic. The mount still has paint in small parts. Oh well its going to be sold for a wilcox anyway.

Attached: IMG_20180517_135815981_LL.jpg (4608x3456, 2.62M)

Geissele ACH imo

Attached: MVIMG_20180331_153601.jpg (3092x2631, 1.52M)

Why doesn't the legend match the patterns on the map?

I hate all of you

I still love you, user.

Attached: 1506899752173.png (205x175, 4K)

Holy fuck this guy got fucked. ar15.com/forums/Equipment-Exchange/Paid-for-item-seller-backs-out-ten-/109-1766466/

No it looks like he learned just in time.

>Lose $1250 for not researching
Yeah he got fucked.

He didn't go through with the sale

He did, keep reading.

No, unfortunately, he did.
I didn't read through the whole thread of fudd at first.

Optic looks better *sh.
Don't buy a luxury charging handle until you have your rail.

Attached: IMG_20180513_210945_411-1131x2011.jpg (1131x2011, 538K)