Liberator

Ai have it, but I'm too lazy to find. Sorry.

Already did, when it was first out; but it was simply a proof of concept.
If you're doing plastic, 3d printed pepperboxes are better now. If not, a polymer 80% is fine.

right about what? Make the barrel walls two inches thick and 12 gauge is a piece of fucking cake

Attached: 1528119940772.png (2140x1739, 3.89M)

Get the mega pack, my dudes.

Attached: Diosmio.png (1101x623, 65K)

Is this updated? There's more stuff here than what I have. Link pls

Nope. I've just added some stuff I've found from other creators over the years. Like Imura's shady weird prototypes, and the PG22.
Pic related.

Attached: PG22HD.jpg (1280x720, 301K)

>This is a fairly weak caliber, so that they will not be torn, and at the same time powerful enough to kill someone.

24000 PSI. .22LR is not particularly weak and if you think plastic that is formed by melting can handle a high temperature torch at those pressures (can't be othered to look up peak temp) and you want to trust your hand well go for it. Every single one of these plastic printed 'gun's actually use barrel sleeves and metal components. Fact is you could stick those same metal components into a piece of wood and probably have a nicer gun.

>Every single one of these plastic printed 'gun's actually use barrel sleeves
Simply not true. Some of them, such as the Liberator in OP's pic, do use printed barrels, typically with single-digit barrel lives.

More like barrel lives that can be counted on what fingers you have left.

It was never illegal in the usa. Americans have always had the right to manufacture personal firearms.

Yeah, but now it's legal to send the files to ISIS, so they can print it out of PLA and blow their hands up.

yo what the hell kind of absolute black magic fucker is this

Attached: Capture.jpg (1366x668, 203K)

I understand the appeal of the liberator to people in cucked countries that don't allow guns, sort of. Where do they get the ammo?

And for people in the USA, print an AR-15 lower and mail order all the other parts of an AR-15 without a background check, or buy them cash at a gun show with no background check.

Attached: i-3d-printed-an-ar-15-assault-rifle--and-it-shoots-great.jpg (3264x2448, 3.29M)

too slow, your normie bookmarks have been permanently archived

the same magic that was used in the old "mods are asleep post sinks" threads to post CP on /b/, i would say lurk more but im going back so far half the population of Jow Forums wasnt even born when people were doing that

Attached: 1369372461457.gif (500x280, 640K)

>find a cartridge in that corner under your bed where you never clean
>find someone with a gun
>shoot him with your liberator and take his gun and ammo
>find someone with a time machine
>shoot him with your stolen gun and take his time machine
>put a cartridge in that corner under your bed where you never clean last tuesday

it's called hiding data in imagery. All that static? Yep, your computer can read it... if you tell it how. think of the image as a 7zip archive.

Yeah i remember people posting tiny pictures that were like 50x50 pixels yet still 3Mb or whatever max file size was back then.

I remember those threads but I never knew they were secret images lol, guess that's what happens when you're like 14 and retarded

Shit, can you post a the files you added?

As if 22lr uncontained has enough case capacity and enough explosive potential to blow off your fingers you retard faggot.

No. Lurk more faggot.

Come on, everyone was a newfag at some point. Besides, this is suddenly a topic worth looking into with the rise of 3d printing and the decriminalization of having these files.

Lurk more faggot.

>Says that everyone who wants the files should lurk more
>Never posts the files
Thanks, you too.

It's nerf
Or nothing

you can literally buy barrels online, why do none of these designs work around existing barrels

like, just buy a walther p22 barrel for $40 on ebay and connect the rest of the shit to your shitty plastic printout. how hard is that

the antigun obama DOJ ruled it was illegal to share the schematics and digital files online because it was breaking ITAR rules. they lost in court

>live in california
>mfw cant even make your own funs anymore

Attached: 1524079324336.gif (217x217, 1.46M)

>make it possible for anyone in the world to make their own guns
>smokeless, blackpowder, and primers way out of reach for those in the scary authoritarian world

gog darn it

Attached: 1530860044482.jpg (870x652, 74K)

Try .410 pistol loads. Unless you plan on using only flares

just gib it time. and intelligent people know how to make that shit anyway. but i say Jow Forums should start supply crate dropping the based euros who are stuck behind the iron curtain

we should shouldve snagged that tu-95

>mfw i have 2 friends who build 80% ARs without giving a shit about dumb unenforceable cali gun laws

Some do. The Shuty uses a glock barrel.

>>you can literally buy barrels online, why do none of these designs work around existing barrels
Because these designs are meant to be provocative, not practical.

Are you really so autistic that you cannot see this?

Huh?

What happend to murdercube.com/?

>nitric acid from air, water and electicity
youtube.com/watch?v=ep23ds4cZs4
>sulfuric acid from sulfur, water and air
youtube.com/watch?v=7SDHeTcOXtI
>???
>profit

>the decriminalization of having these files
having them has never been criminalized, exporting them (i.e. posting them on the internet) was the issue.

A really simple and quite safe method for sulphuric acid is electrolysis of copper sulphate, which is available cheaply at gardening stores as a supplement.

>posts screenshot of megapack
>won't share the link
Wew lad, you must be the coolest dude on Jow Forums. All of us anons are just frothing at the mouth over your super-exclusive stuff.

once

nitrocellulose made from shit quality chemicals ends up also being shit quality...you can't clean the crap out of it and that causes it to be unstable if stored, quite useless if want to make ammo with it...
Nothing like having you ammo stash randomly burst into flames/explode or even worse, fail to work when you need it...

Literally do a fucking google search you stupid fuck

It’s .22lr, you could buy two feet of brake line and make barrel sleeves.

Attached: 1531274361776.jpg (1366x763, 173K)

Classic Lucas

Attached: 7617598768.png (569x412, 174K)

The name of the pack is literally in the photo

protip look at the location take at the right, then google whats in all caps

i want to know what sort of goodies he bookmarked in awesome stuff

It's disappointingly tame, unfortunately

Attached: Screenshot 2018-07-11 16.23.22.png (370x471, 19K)

Sure I can. I don't know who the guy who said "no" was. It wasn't me.
youtube.com/watch?v=LHtxkjBI0bQ
The link to the PG22 is in the description. Password to open archives is "Pilotgeek45".
The Imura stuff was found by reading his weird Twitter every now and then: twitter.com/Imura_Works

technically they settled

>be sinkfag
>literally just a plumber who enjoyed building new bathrooms for wealthy people
>those threads
>"finally like minded people like me"
>find out they were just using it to shuffle CP
>have to delete my entire archive of pictures

Attached: 1491764630468.jpg (326x315, 39K)

>you can literally buy barrels online, why do none of these designs work around existing barrels
There is a world outside of the borders of the USA where one can not purchase firearm parts without a "loicense".

>single shot .22LR
what's the danger aside from maybe some low velocity shards of plastic that fly out perpindicular to the chamber's location? Wear saftey glasses.

I wonder if I would be reported for 3D printing an AR lower. Probably?

I'm in NJ for the foreseeable future and I don't have the funds to establish a residency in PA - my local PD refuses to actually finish my firearms purchaser's permit and just gives me the fucking runaround for nearly a year now.

Assembly is banned without the proper license but who could possibly know?

Print it in your local library and post gopro footage of any confrontations.

how new are you? People were hiding shit in images in 2004.

This

>no, I made this gun before it was against the law
>prove I didn't

University I attend is an engineering school - I could probably get access to machinery with a few greased (and succ'd) palms.

I just can't fucking believe how awful this state is - and it's only getting worse.

>The Imura stuff was found by reading his weird Twitter every now and then: twitter.com/Imura_Works

He doesn't post that many firearm designs anymore, probably because he was just let out of jail a few years ago.

He does enjoy posting about gun rights, immigration rights, and Japanese maid waifus however.

Fuck, I never thought of this.

Can we combat terrorism by just polluting the internet with /b/ tier mustard gas and exploding spoon instructions until all of the sandniggers blow their hairy asses off?

In other countries the laws are different. Barrels are serialized parts and you need big brother's permission to buy them in many places.

Shit takes forever, dude. Printed lowers are trash anyway. You would be better off finishing an aluminum 80%.
Perhaps you could 3d print the jig to save money? Nobody would know what it's for even if they saw it.

Intelligence agencies already do that. Ever seen one of those pics of an RPG warhead wrapped in duct tape?

that's why I advocate nitrating glycerine and/or hexamine, using acetone peroxide as a primer, and just building IEDs to piss off/overthrow tyrants.

No, but figures, and maximum kek. I wonder how many "counterintelligence" analysts are just strategically shitposting all day

TACTICAL
AUTISM

mmm, how about recipes

oi thats cheeky m8

the problem is californias new law requires all 80% homebuilds to be registered and implanted with a metal block that holds a serial number, so they can prove its illegal if they catch you with it and its not registered or has no serial

When the State Department filed an ITAR injunction against DD for "exporting weapons data"

The settlement had the State Dept formally agree that their claims were in violation of 1st amendment rights.

Its not TECHNICALLY case law, but any future moves against this sort of thing have a very solid defense to fall back on as a result of this ruling.

Prove it was built before that law.

Protip, you (usually) cant

Ex-post facto is a thing for a reason

Ex-post facto doesn't exist in Cali. If you get caught you'll be in prison until the law is overturned.

well making gun cotton is fairly easy. or one could go for the ol firecrackers or armstrong

Buy a 3/4" 20" black iron pipe, a union, and a cap.
Buy a piece of wood.
Cut wood into the shape of a stock.
Drill a small hole in the cap. Weld, braze, or epoxy on a sawed off screw with a tiny hole in it.
Saw off threads on one end of the pipe. Screw on the union and cap on the other end.
Make a trigger group out of some sheath metal and springs. Place the trigger group on the stock.
Secure iron pipe on the stock with hose clamps or something else.
Crush 40 match heads, pour into pipe, stuff paper in there, ramrod it, pour in lead fishing sinks, put in another piece of paper, and ramrod it.
Place toy gun cap on the screw with the tiny hole.

And there you have it. A shitty muzzleloading 12ga shotgun using crushed match heads as propellant, and fishing sinks (or whatever you find) as shot.

>prove it was built before that law
>*looks at receiver, notices zero serial numbers. looks at your other receiver, notices some meme serial number. runs through california AFS on jackboot-issue laptop. ALERT: ZERO MATCHES FOUND: ALERT. anonfag is arrested for being an idiot by gavin newsoms gestapo, his guns are taken and distributed to the needy MS13 who were just dropped off at the platform by the mexico-california illegal alien express 9billion dollar train.*

do you even know the law? they purposefully wrote it so there is no "grandfathered" homebuilds. protip, they can fuck you over extremely easily if they find your homebuilt lower without a registered california DOJ serial number. my god you fucking imbecile millennials, stop acting like you know what you are talking about and read the god damn shit yourself. better yet, get off your lazy fucking cheeto videogame ass and volunteer at conservative political campaigns and efforts to restore gun rights. you dumb faggots just sit back like ignorant cunts while the entire left is rabidly mobilizing to go full socialism and pick you off one by one

Attached: 1469734342271.jpg (667x720, 38K)

(c) By January 1, 2019, any person who, as of July 1, 2018, owns a firearm that does not bear a serial number assigned to it pursuant to either Section 23910 or pursuant to Chapter 44 (commencing with Section 921) of Part 1 of Title 18 of the United States Code and the regulations issued pursuant thereto, shall do all of the following:
(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.

Attached: 1531347053622.jpg (600x600, 66K)

>a union, and a cap.
A union has two female threads; it's like a coupling that comes apart in the middle.
A cap has one female thread and one closed end.
There's no way to screw these on to the same end of the pipe.
I assume you meant a plug rather than a cap, but what's the purpose of the union? Why not either a cap, or a coupling and plug? At first I thought you were going for a breech-loader using the union to remove the breechplug, but then you didn't?

Jesus christ, that flies directly in the face of ex-post facto which is pretty ironclad at a federal and state level. The absolute balls on those commie motherfuckers.

It's going to get faceraped in the courts eventually, but goddamn someone is going to get screwed by this. I pray they dont have any doges for the CA BATF to shoot in the meantime.

Correct. Just me being sleepy. Coupling and plug was what I meant.
It's a muzzleloader.

Attached: 12GAMuzzleConcept.png (440x238, 108K)

Take an orion flare gun, file out the parts that prevent you from shoving in a 12 gauge shell, and shove one in.

You are mistaken.
The NFA did the same thing when the machine gun registry came into existence. As long as people are given time to serialize and register their shit, then it's cool in the eyes of the courts.

I thought those were just lolsorandumb threads. I saved a bunch of those sinks on my old computer as well and I still have it. Am I going to get v&?

>Am I going to get v&?
Yep. The feds are just going through their backlog at the moment. They'll get to you eventually.

yeah dont shoot the messenger i was just letting you guys know. obviously its unconstitutional and authoritarian bullshit.

How does someone embed data into a image like this?

Would be nice to make some good OC that could be quickly shared on Jow Forums.

Attached: IMG_7202.jpg (660x1600, 257K)

And blow up your hand?

youtu.be/WjVw1_H3wXM