/akg/ AK General

AK General /akg/
SBR Setup Variety Edition
>Thread #661

Old thread here

Attached: 36645993_851468158382706_755869387457560576_n.jpg (1080x1285, 254K)

Other urls found in this thread:

pastebin.com/YdEkhdva
atlanticfirearms.com/component/virtuemart/shipping-rifles/morr-aam-rom47-red-detail.html?Itemid=0
atlanticfirearms.com/component/virtuemart/shipping-rifles/childers-pol-wbp-barreled-receiver-detail.html?Itemid=0
twitter.com/NSFWRedditImage

>AK Buyer's Guide

pastebin.com/YdEkhdva

Draco > M92 > Krink

Liking the shotgun with the H&K sight.

Where da clearbois @

Attached: 20180802_174931.jpg (2560x1440, 2.36M)

Fucking fuck I hate Samsung so fucking much

Attached: 20180802_175256.jpg (1440x2288, 2.74M)

90 degree is better than 45 degree

>RAS47
>$500

Thoughts?

Save up and buy an IO or Riley Defense.

Yes thank you Igor for regurgitating age old information
What would we do without you

what stock adapters are on those dracos?

A new fangled whatchamacallit, I think it's called a "rear trunnion"

This or spend the extra money on an c39v2

RIP FB Groups The Magazine Exchange and The Furniture & Optics Exchange.

Less avenues to find good gear.

Attached: IMG_4817.jpg (4032x3024, 2.32M)

>using faceberg in 2018

Thanks guys will do!

atlanticfirearms.com/component/virtuemart/shipping-rifles/morr-aam-rom47-red-detail.html?Itemid=0

Are these Atlantic Firearms MFG Romanian AK47's worth a damn?
What about an M70AB2?

did they shut it down?

>US barrel
>US receiver
Buy one of the Polish WBP for a bit more

>tfw you fell for the WASR meme and are now in an eternal warranty repair loop with century

Attached: stupudding.png (200x200, 190K)

More deals for myself and others sure thing.

Both earlier today, disgruntled member being a rat bitch.

>US receiver
AKG is literally just retards at this point.

Manticore arms stock with stormwerks adapter

Found the retard

Arsenal vs Vepr?

Both are around $1300

What happened?
Also this

i wish i got an slr104ur instead of a fr. i wasnt planning on stamps at the time but if i had a UR, you bet your ass it would be stamped by now.
i guess i could always trade or something but whatever

was hoping ya'll could tell me anything about an AK at a local pawnshop. It's an underfolder, supposedly Bulgarian with a Bakelite grip, and the underside of the receiver in front of the magwell says MOD: NOS-1. Couldn't see anymore, the counter guy does not like looky loos.

>the gun owner doesn't like looky-loos
Then don't give him any business whatsoever, period. There is no reason to commit to buying it or giving him any business whatsoever if he doesn't like people checking it out. Simple.

supposedly Bulgy underfolder Kit built on nodak spud receiver.

Without pics or anything more thats all your gonna get

I said "business whatsoever" twice but fuck it I'm drunk as hell

aren't we all

US barrels are shit and US receivers are notoriously shitty
>AKG
git, newfag

Nodaks and Childers are pretty bitchin, especially Childers

Lmao @ the fresh faggots buying $70 bakes on the files

>counter guy does not like looky loos
Then you need to find a new gun store that isn't staffed by people with broomsticks shoved up their ass. Either that or you look like a school shooter

Attached: 1526070034701.jpg (500x669, 64K)

i'll post one on monday when it comes in the mail

Attached: extendo.jpg (2576x1932, 1.29M)

>tfw over $800 after taxes, shipping and FFL fees
atlanticfirearms.com/component/virtuemart/shipping-rifles/childers-pol-wbp-barreled-receiver-detail.html?Itemid=0

Fucking California, if they hate guns so much they shouldn’t be collecting sales tax on them.

>US barrels are shit and US receivers are notoriously shitty
Summer get out, theres nothing wrong with ak builder barrels, and what the actual fuck are you talking about us receivers are shit?
Where the actual fuck do you think you can get get a non us made receiver?

Fuck off faggot.

Yellowtags will singlehandedly kill this market

>there’s nothing wrong with one boutique barrel shop
How about everyone else

Well it's governed by a bunch of jews. What's you expect?

Both of my AKs have Russian receivers

Attached: E33C9A32-2044-4880-849F-039A8D5C3D14.jpg (4032x3024, 2.99M)

>The largest most popular source for ak barrels for builders is a boutique shop

>A Russian AK with english letters.

>AK Builder barrels
How do they stand against Green Mountain 4150 barrels? From my understanding those are the best US made barrels but theyre still subpar.

buying a prebuilt rifle that came in as a sporter and was debanned isnt a source for non us receivers mongoloid.

>subpar
compared to fucking what, in what fucking metric are they subpar?
Do they just not satisfy your autism, because that isnt a fucking metric.

There are shit barrels, but dont buy IO surplus barreled kits, youll be fine.

Indeed

Attached: E0A60C70-A5A7-490F-A811-151788B529D8.jpg (4032x3024, 2.21M)

>buying a prebuilt rifle that came in as a sporter and was debanned isnt a source for non us receivers mongoloid.

How about, oh I don't know, the STANDARD COMBLOC CL-CHF
We literally had this discussion one or two threads ago over a multitude of posts, newfag. Why don't you come back when you don't have a piss poor attitude towards people asking questions? I'm confused as to who the fuck you think you are.

I'll say it again since you can't read, by what fucking metric are they subpar? Hardness, durability, fucking wear patterns, or is it just your fucking autism.

Instead of being a butthurt fucking retard, why don't you - I don't know - provide some evidence to your claims?

Attached: 1528510458774(1).png (382x491, 124K)

Durability would be a start, how do they compare? What's their round count like before walking headspace? Before the crown starts chipping? Before the chrome or rifling wears?
Instead of shitposting why don't you back yourself up with some facts to support AK Builder (or GM) barrels so you look less like a retard?

You’re right, they put made in Russia and Molot on them to fool me

Well the original question was “where the fuck can you get a non-us receiver?”

Well, apparently from a vepr

Inter Ordnance, more like Unexploded Ordnance!
OOOOOOH

Attached: mario-chill.png (199x197, 60K)

The onus is on your to satisfy your fucking autism buddy, people at been building their kits for fucking years and never had any problems with akbuilder barrels, keep shitposting about how superior overseas barrels are somehow mysteriously better with nothing to back it up. But I guess your happy with trying to find a barrel that isn't galled, pitted, bent, or lacking all of that, costs $1000+, assuming it even exists in the profile you want.

>buying a prebuilt rifle that came in as a sporter and was debanned isnt a source for non us receivers mongoloid.

>still avoiding the question(s)
w e w l a d
enjoy one last (you)

>The onus is on your to satisfy your fucking autism buddy
what did he mean by this
this whole post was difficult to read

why do you think krink is the worst?

dem handguards are too small for me hands
7.62x39 does better out of that barrel length, as well

You've provided nothing to support your argument that all us barrels are somehow inferior to all overseas barrels.
I asked for literally any metric that us barrels are inferior, and all anyone posted was
>STANDARD COMBLOC CL-CHF
Color me totally owned apparently

What's up with the faggots bitching on the files about DB? What was it?

Attached: Screenshot_20180802-221445.png (720x1280, 109K)

what if i have a 107ur that i'm going to make a "krink"

where is your god now?

If it's not an AKMSU I ain't about 7.62 krinks
the more you know
I thought he meant anus

Okay then argue with me bud, since I'm not him and I *didn't* make any claims myself. I assume you saw my post and chose to ignore it, so I'll continue to sit and wait.

the fuck? you contradict yourself

you're mad your god is gone

>you will never own all of these

Attached: 1281776259070.png (184x172, 3K)

Work harder

bruh bruh, what is the brake second front bottom? it looks narsty in all the right ways

>imblyig I believed in god :DD
How so?

What that American barrels aren't irredeemably the fucking worst? That's there's nothing wrong with them?

I can't prove a negative you jackhole, tell me one fucking way an overseas barrel is supposed to be superior to barrels that use identical steel, made in by companies very well known by anyone who actually uses their barrels as making excellent high quality barrels.

do you believe in 7.62 sbr fireballs in the sexy krink package mr. big hands?????

because it believes in you

Is it blasphemy to have a side rail built into a Draco if so, is it less blasphemous then my current config??

Attached: 26A30499-E6AE-4DE0-84CE-8D15F6EA32C0.jpg (3024x4032, 3.1M)

>been a yellow tag for awhile, was a member before they were even a thing
>never overpay for anything
But I agree, although it's the "Member since '18" that does it.
I only post "I'll take it" and only ever post in the marketplace, which is why I probably still haven't lost the tag.

>I can't
Alright, case closed then
I don't have to prove anything, because I never said anything. Do You know how this works?
[spoiler] extraordinary claims require extraordinary evidence and can be dismissed without such [/spoiler]

Alright I'm kinda lost now
Just so we're on the same boat my biggest gripe is constantly burning my fingers on the barrel band

>extraordinary claims
So saying that there's nothing wrong with an American made barrel is an extraordinary claim somehow?

is the vepr converted, what’s it come with? how’s the stock

Oh, I'm sorry, let me fix that in a way you're sure to understand:
Claims require evidence and can be dismissed without such
Still waiting. Time's a tickin!

>this guy doesn't operate AKs with gloves on
>laughchickswithsalads.png

Attached: ass.jpg (492x676, 92K)

Can we get some trips in here to shit this thread up even more?

If you got some decent gloves trust me I am all ears man, all mine have melted each time I use them :^[

>So saying that there's nothing wrong with an American made barrel is an extraordinary claim somehow?

where's Jewboi shitposting about his ACE when you need him

It's the same as the bottom one.
It's either a ZenitCo DTK-2L or the CNC Warrior clone of it called the "Compact Brake"

groupme

Attached: 20180707_212811.jpg (1240x2560, 1.73M)

get a railed dust cover for full sacrilege

last one has a pretty slick paint job

angle made em seem different. thanks user.

Why the banana

... do you not?

But I don’t wanna be sacrilege.....

>STILL avoiding the questions at hand
so we should all buy ESS barreled AMD65s then?

you’re already blaspheming, earn your trip to hell, dont just dip your toe

picture is way too large for that low of quality baka famalamadingdong

Whoa since when did s-m-h get changed to baka? Is that new or have I just never typed that before?
is senpai the same?

>Hyperbole as the only argument
There's nothing wrong with AK builder barrels, especially since they are in fact CHF.
Prove me wrong

guess not lol strange how many things you miss when you don't act like a nigger