/bst/ Buy/Sell/Trade

Not gun related but using the money to fund a gun since I don’t use it anymore, selling a PS4 and 4 games for $200

Might have luck selling that on ebay or facebook (if in a city).

How I am peddling off tons of thinkpad laptops.

I’ve put it on letgo and Craigslist and retards keep asking if I’ll take $100. I’ll try eBay

Yeup, takes time.... also don't have best offer on ebay or you'll get the same $100 retards, unless set best offer to just auto counter off at higher price.

Check Gunbroker and armslist too. One will show up eventually.

I was under the assumption that black powder firearms were not actually considered firearms by federal law.

Wtb a nice used plate carrier, with or without plates.

Anyone want a Wood Remington 1100 stock or overmolded rubber Hogue stock for a Mossy 500?

Send me an offer and we can chat about it. I'm more looking to just get rid of them.

[email protected]

Also, I'm looking for any/all 3rd Generation S&W semi-auto 12r magazines. Forgot this in the last post, so I have to double post (i'm a faggot, I know).

[email protected]

I'm intetested Glock 19 parts for a P80 build. Only have the frame and sights so far. Not looking to do an RMR build.

I have an extra RMR laying around. $475 shipped

Pics of Remington)?
Pls gib:
Year (ballpark is cool)
ga
Barrel length
And of course roughly what you want to get for it

Beretta 84 asking $450 with two mags and grips. Located in South Georgia

Attached: 32CD3579-C861-42E8-87FD-251A4C7B4923.jpg (2190x1536, 589K)

Not the shotty, as was posted, just a stock.

Was purchased in the past 3y. I suppose it'd be for a 20ga or a 12ga. No barrel length as just the buttstock.

I'm looking for (honestly) like 25$ for it - email me at the email address ([email protected]), and I'll send you the photos to an email account.

I have an ACE folding stock for an AK ($120), Midwest railed gas tube ($90), East German pebble stock ($20), AUG pmag ($10), Magpul AK furniture ($30), Zhukov AK set ($50), M16A2 flash hider ($7), and Remington 870 factory synthetic furniture ($70). All of these are negotiable. Located in South Georgia

Where the hell do you live? I want to buy a beretta and I live in Georgia. I'm under 21 but have my driver's license.

Attached: afternoon tea.jpg (959x638, 150K)

Statesboro, as long as you’re over 18 I’ll sell to you

Attached: 4939BF5F-61E7-47B9-B63D-6746549C7B56.jpg (1438x1048, 287K)

Im 17 and three quarters. Can you just be cool?

no fag

Possibly mr. ATF man if you email me

All you had to do was lie here and tell the truth over email.
Oh well.
Enjoy your 3-month ban.

>Implying Im not 3 proxies deep right now

Attached: Good_Luck_I_m_Behind_7_Proxies.jpg (455x300, 44K)

RIP, amigo. I'll see you in three months
Fuck the mods
Fuck the the jannies

Can anybody sell me one of pic related?
I 'm from Europe and can't get one of these without a licence. I don't think shipping would be a problem. It's only a small piece.

Attached: extractor.jpg (275x183, 2K)

Fucking serious? Just get bar stock, a file/dremmel, sledge hammer, and mapp gas torch if it is that fucking hard to buy locally. Look schematics up online if don’t have original for reference or make one to fit if have the actual gun and ammo.

Black powder firearms aren't guns unless you live in new york or something gay you retard.

I've tried. The casing ruptures every fucking time. Can't get it out out of the barrel.

I am not a genius but that would tell me you did something wrong.

Surefire X300U-A Tan.
Good shape. Come with alternate mounting bits. Asking $175 shipped.

[email protected]

Attached: 20180819_172435.jpg (1283x1313, 604K)

Custom Glock 17, G17 full size 9mm. Built on a Polymer 80 P80 PF940V2 full size frame. These frames are extremely durable and comfortable. Skip spending $200 to stipple and undercut a factory glock frame when you can get this. Nice texture, nice triggerguard undercut. Feels great. Factory Glock internals inside the frame.

Upper is an Adams Arms Enforcer G17 full size slide assembly with their match threaded barrel with thread protector, XS big dot sights, and Trijicon RMR cut. Runs like a top. One full size 17 round mag kit.

Asking $650 for pistol, one mag kit. Does not include X300 or RMR. Can include X300 for additional $100.

Attached: 20180819_172350.jpg (1447x1181, 657K)

Selling Trijicon Accupower 3-9x40mm Mil dot red illuminated scope on ADM American Defense Manufacturing Recon FDE scope mount with Vortex scope level. Asking $550 shipped. Great shape, comes with original Trijicon box and documentation. Nice clear glass. Scope is pictured.

[email protected]

Attached: 37335601_10214879608076614_1881279058143084544_n.jpg (2409x1317, 1.45M)

Another angle

Attached: 20180225_125500.jpg (863x701, 351K)

your stipplings p.cool.

I'm not a polymer guns guy, but, grats on making it not look like a boomer did it with a soldering iron.

$195 new off amazon and don't need to deal with your faggotry.
Isn't this the same un-serialed pistol you derailed an entire /bst/ on that was having issues, then not having issues, and asking for msrp on everything?

Shits and giggles, how much for you to take that to a FFL and have it shipped to a FFL?

Anyone in Minnesota looking to sell a Smith and Wesson 5906 or 4006?

Attached: C8EF288D-1754-4820-9157-F39E4F6002B9.jpg (1350x900, 309K)

That is actually the factory grip texture of the polymer 80 frame.

>$195 new off of amazon
No. amazon.com/dp/B00NCAD1J2/ref=twister_B01KVY2VN8

Pistol is serialized. The only "issues" the pistol had were that I had some trouble completing the actual polymer80 build, but once the build was completed the pistol ran great. I has functioned flawlessly from the very first round I put down the barrel except for magazine issues (combining aftermarket ETS magazines with aftermarket pearce grip extension that specified it only worked with OEM mags), and a handful of issues shooting suppressed that were most likely due to using the wrong recoil spring (3 are included) and a suppressor that needed the piston cleaned and lubed.

Price is in post.

Attached: 20180225_125516.jpg (979x775, 505K)

I want an M92 PAP very badly and I have shekels. Southwestern WI

Attached: Max chen committing a felony .jpg (1077x1691, 578K)

Just so you can check his previous prices

Attached: 20180817_215745.jpg (1080x1130, 381K)

That's the good stuff.

CO user looking to buy a 22 revolver

>Yes, yes it is.
>Paying $50 more just for tan.
amazon.com/SureFire-Ultra-Handgun-WeaponLight-Rail-Lock/dp/B00999CBJ6

Looking for a scope to put on my AR. Doesn't have to be anything crazy just used for plinking medium to small hogs mostly sub 100yds MAYBE 150.

Anyone trying to send a case of 30 round pmags to a CaliCuck stuck behind enemy lines?

>and 4 games for $200
Which games?

No one wants your gay shit especially from you.
You are officially a bigger faggot than Dr8co

You're a faggot. Turn off your trip and abandon your past.

>bigger faggot than Dr8co
Appreciate your enthusiasm, but no. Dr8co, SAO, 9mm, and Zed shitposted yo the likes of which we will never see again.

What's wrong with it? How did you fuck it up?

Fallout 4, Metro Redux, and last of us remastered

That's only 3 games, user

1917 Rifle. Eddystone with a Rem part or two that I could find. No cartouches or markings visible on stock, no idea on ME or TE but the bore and action are in good shape.

Bbl 6-18 and receiver I think is 1-18

Attached: 6ABE7773-C6A3-46E0-ABB7-D1B2CE6D6B61.jpg (4027x1109, 876K)

Sig Sauer M400 Enhanced.
$800 obo
Email [email protected]

Attached: 54D96D7D-F786-47C3-94A1-734C978F0B0B.png (750x1334, 1.8M)

Redux as in both last light and 2033 i assume.

Whaddya want for it?

>this again

You’d be better off selling this locally and abanadoning your trip after all the autism you caused the last thread to fall into

Still interested in a K98 and maybe an Enfield No. 4

Looking for 7.62 bakelite mags for $40ish. Condition isn’t the end of the world if they work. [email protected]

Garbage rod for sale 91/30
>bought from crate
>just cleaned out some cosmoline
>never shot
>full kit (tools, oil bottle, bayonet, 2 stripper clip pouches)
>doesn’t have sling
>only molestation is CAI import marks
>$350 +ship to your ffl
>located in middle TN, willing to meet if you’re close on the weekends
>can send pictures when I finish my shift in the morning
Bought it on a whim, but don’t really have room for it. Just gonna bury it if I don’t sell it within a month or so.

Redux is metro 2033 and last light on a single disk, should’ve clarified, that’s my bad

$650 shipped

email
[email protected]
for more pics

Yeah, no shit.

Look Primary Arms prism scopes or SWFA 10x42 scopes

Bump for merchant anons

Fuck off david

why are everyone mass selling their echo triggers?

Pretty sure that's the only one in the thread

i see em in tacswap and armslist

What? No it’s fine, it’s just not for me. Why do you ask?

Because they suck.
>only mildly better in normal mode than a milspec trigger
>fire on release is ultimately worthless
>almost twice the cost of the best triggers on the market

I need to stay away from these threads and keep my paycheck

>91/30
>350

I'll give you 200 cash, fucking kike

>350 doll hairs for a moist nugget

Get fucked jew

Mosins can still easily be had for under $300 you fucking jew

t. Samefag go buy one for less elsewhere that comes with everything then

>functioned flawlessly
>except this
>and this
>also this
>and that
>oh yeah and this

Needing a whole paragraph to explain functioned flawlessly issues isn't functioned flawlessly....

Optics planet has em for 450-500 brand new
>Tripfaggots

Fuck u jewburg

Attached: Screenshot_20180824-174104.png (720x1280, 195K)

Ok, and show me a mosin w/ full kit for under 350.

I can find them regularly at pawn shops for about 100-175$ without kit and then the costs less than 50$ online

I bought mine a while ago I just had to call a you a filthy fucking shylock for trying to sell one for nearly double the price

>$100-175 mosins
Lmao. Go tell /msg/ I’m sure they need a laugh

At a pawn shop or a good decent local gunshop, not on gun broker or anywhere else were they are over priced,
Taking your time and buying them locally rather than being price gouged online is an option scholomo

Attached: Oy+vey+stop+calling+us+out+stupid+goyim+_207b3d19cf6719158e47184e57b7f880.png (640x668, 12K)

>only my specific sources that I won’t list are proof
Dude, why are you sperging this much over a rifle you’re not even going to buy? Say it is too high, then it won’t sell. If I need to sell it then I’ll lower the price, if it still doesn’t sell, repeat. Maybe if you paid attention in school you’d understand how capitalism works, and I’ve looked around several places online to get an average price and that’s what I’m selling it for. You can call me a Jew all you want, but you’re the one sperging over something you don’t even want.

>goes on a Mongolian throat singing forum and tried to new people
>is angry he gets called a jew

Go back to Isreal

>is angry about the price of something he isn’t going to buy
>calls someone else a Jew

>I can find them regularly at pawn shops for about 100-175$

HAHAHAHAHA

Nice dubs rustyschekelford

Attached: josephGoebbelsJewQuoteMeme.jpg (737x554, 113K)

Keep projecting m8,but you’re still getting ass mad about a poorfag rifle you can’t afford.

Gotta sift through the mountains of glawk problem solvas, American made aks , assortment of used shotguns and you will usually find something good.
jaquan and Tyrone usually aren't buying up grandpa's old surplus he's selling because social security can't cover rent anymore

I have one, but I am enjoying getting one of my Hebrew friends riled up on a random French soup enthusiast forum