So Jow Forums, I was gifted some gun parts by my uncle and I'm interested in purchasing the rest of the parts so I can finish this rifle
First off, as a complete first time user (other than owning a .22 rifle) I'm obviously not going to attempt putting this together myself as that would be stupid and despite the very liberal area I live in, there are many gun dealers where I can get it put together. But, I'm not sure what else I need to finish this rifle.
Now, what's not pictured is that I also have a Lower Parts Kit for this that has parts like the trigger, bolt catch, safety selector, etc. So with those, I will still obviously need a barrel and stock (no stock came with my lower parts kit) but what else?
My uncle told me he did. So, here's to hoping he told the truth. But even if he didn't, I obviously intended on getting everything squared away and making sure everything was legit before going ahead with any assembly or anything
>doesn’t know for sure if it’s registered It’s like you literally want your dog to be kill
Austin Kelly
>Register >In America
California is not America. Do not comply.
Bentley Reyes
Do you have a general idea on how much $$$$ it should take to finish this?
And I dunno, my uncle from my dads side who was actually in the military advised me it would be a very bad idea to put it together myself as a first time thing. Not that I'm completely against trying to put it together, I just wouldn't want to fuck anything up and ruin a part or something. I'm not made of money sadly.
Sorry, I'm not familiar with Jow Forums memes brochacho
OP I’m feeling nice today, it doesn’t need to be registered unless you live in a ban state. Everything can also be ordered online. Since you’re new, I suggest a “drop in” trigger. As for installing, ask your uncle
Ayden Williams
>registering guns Is this a Jow Forums meme? I was not aware that in God's Country we had to register diddly squat that isn't NFA.
Wyatt Howard
Is this bait?
Blake Gutierrez
Thanks for the advice, yeah I was definitely going to ask him for help too.
Unfortunately no. I'm a complete beginner to Jow Forums
Easiest thing to do would be to ignore the upper you've got and buy one that's already assembled. Would be a couple hundred dollars or more depending on what you get, but the barrel/gas tube and everything will be where it needs to be.
Gabriel Bailey
OP, you don't have to be an experienced shooter to assemble and AR. Just watch a few YouTube videos.
Are you able to use tools at all and assemble parts? Have you ever assembled or fixed anything before?
Joseph Wood
Yes. I'm familiar with tools though certainly no expert. Mostly just to the point of being able to do home repair work and stuff to keep things running
1. Guns don’t need to be registered unless you live in a commie state
2. Your uncle’s a fucktard, AR is like legos and can be done by any fucking monkey with a hammer and an armorers wrench.
Jason Brown
Uppers are easy tho...
The whole fucking thing is stupid easy
Andrew Roberts
Then this sounds like the perfect Labor Day weekend project for you. If you have the LPK and the lower receiver, why not put the them together? You will be not be the same man when you finish that lower.
Benjamin Barnes
A woman (female) could almost assemble one, you should be able to
Justin Bailey
Go ahead and awaken your inner gunsmith OP. The worst you could do is scratch the finish on that lower. But don't worry, it is aluminum and it won't rust.
Nolan Taylor
This. Like retarded easy.
Ayden Taylor
>Do you have a general idea on how much $$$$ it should take to finish this? > barrel ~$150 >bcg ~$100 >handguard ~$150 for free float ~$30-50 for some magpul shit >stock ~$50 >sights ~$80 for MBUS >gas block ~$20 >gas tube ~$20
Really depends on what you get.
> Not that I'm completely against trying to put it together, I just wouldn't want to fuck anything up and ruin a part or something.
Worst case scenario (unless you're really retarded) is you bend a pin which'll set you back a whole $.50 from your local hardware store.
Lucky you op theres sales everywhere this weekend so take advantage of that. ballistic advantage make good barrels. geissele has really good parts too.
Benjamin Torres
>Worst case scenario (unless you're really retarded) is you bend a pin which'll set you back a whole $.50 from your local hardware store.
Or he fucks up the headspace
Thomas Adams
That's not a larue MBT, and those are 87 right now.
Angel Rodriguez
>Or he fucks up the headspace
Extremely unlikely with new parts from quality manufacturers. But really you can't fuck up the headspace in assembly so much as fail to check it properly (or have it checked by a gunsmith)
Luke Roberts
If it is then he's good. He sounds like a legit retard.
the lower you should put together yourself it's easy and you'll learn how it works the upper is easy too but you need to make sure the head space is correct so you may want a smith to do that what state are you in? If you're not in a state that requires it, don't let these fools trick you
