Canada General

also, P90, AS Val, M4A1 block 2, an aks74u, a glock and a set of gun hands in black

>Someone posts the milsurp you want on CGN
>They bubabed the stock

Attached: f60.jpg (250x249, 6K)

>aunts boyfriend has a Mauser somewhere
>says he shortened the stock
a

Attached: IMG_4175.jpg (621x502, 57K)

>"It's much better that way user, it was so front heavy before.I also welded on a scope so I could see what i was aiming at ;) "

>less than 10% of RCMP's best guess of total guns based numbers from old LGS have been registered.

>probably 1.8M instead of 1.6M guns in Quebec

>the registered ones are literally the bootlicking cucks and new imports/in store sales

AHAHAHAHAAHAHAHA Fuck you Quebec Libs.

N O N - C O M P L I A N C E.

Attached: jnkggev5puk11.jpg (800x600, 80K)

Don't forget to get yourself a nice black rifle before C-71.

Attached: 9b7.jpg (1000x500, 53K)

>Just bought a PE90

I know this feel.

Enjoy bud

youtu.be/NedACdMkA2w

>I erased it! It was just proof of concept!
lmfao, you white outed your gun

My wallet

Attached: 1536356560049.jpg (1125x1119, 287K)

This warms the cockles of my heart.

But that vid was taken prior to removal..

By the way, its steel paint for welding shops. They use it to label inventory of structural steel and lot numbers.

Came right off with CLP and scrubbing with microfiber.

I kind of want one of these. Anyone know where to get one? (must have the 100$ bill wrap)

Attached: nigga.png (902x564, 421K)

Tyrese down the block

You can still get SVT-40s and Chinese-made M1As,

don't wanna hear your shit leaf.

Attached: DrPepper.jpg (700x394, 55K)

Pic related

Also, general question, would it be better to build an SLR or buy a Doe10? I'm assuming I can get all my parts together and have a gunsmith build it for me, yeah? I've never done something like this before.

Attached: 1533923724256.png (511x477, 630K)

>SVT-40's

They were $300 in 2010. They're now almost as much as a Kar98k up here...

If you can afford an SLR do it. I'd recommend preo-ordering an ATRS Modern Sporter NOW instead.

Its even better;

albertatacticalrifle.com/hikashop-menu-for-categories-listing/product/8608-modern-sporter-receiver-set/category_pathway-14

>t.slrfag

sorry, fren, that pocket rocket is Prohibited due to barrel length and I seriously doubt anyone would bother making a compliant length barrel for it, considering the barrel would cost more than the gun. nobody bothers to make aftermarket parts for a piece of shit Hi-Point anyway

your best plan:
1. be made of money so you can afford doing stupid shit
2. buy a Glock
3. have it custom-coated in dalla-dalla billz yo

Attached: 20180908_220318.jpg (3264x1836, 997K)

buy the parts and I'll build it for you :^)
but seriously, it's suicidal-tier boring not having any guns to tinker on because you built them all and no more spare parts.

this is for fags from a few threads back
I saw the question and the drawing the guy answering did, but was too busy at the time to look for photos

so the sight mount the guy answering hypothesized actually exists, I can't remember what the mount is called, sorry, bu tyou can probably reverse search the images or google-fu around american sites and find it eventually
>VZ pictured is obviously Canadian, so you must be able to get it here if you look hard enough

anyway, just wanted to post before I forgot, this is what you're looking for if you want a longer iron-sights radius for VZ
there are no tech-sights for it or equivalent

Attached: IMG_1033Medium-1.jpg (800x600, 43K)

another shot of the rear mount

Attached: IMG_1030Medium-1.jpg (800x600, 35K)

>You can still get SVT-40s
lolno

>most important thing to me about a gun is how it feels especially while shooting
>every purchase is a total gamble

Attached: 1496171495698.jpg (893x960, 66K)

Try this. Someone pointed this out in another thread a couple of weeks ago, and I had a look and was somewhat amazed. No tricks, just a simple Google search:
google.com/search?q=toronto murder suspect
Once you're at that obvious search result, click Images. Then start scrolling down. Notice a common theme? We 'Merika now baby. And I'm not even racist, I swear! Fuck racism. We know all sorts of folks of African decent. I'm married to and have kids with an Asian woman. But this shit is just too obvious and freaky. And do these guys even have the US excuse of being ghetto-ized? In Canada's welfare state, social safety net culture? Seems unlikely. More like guys and families with zero interest in taking responsibility for leading a productive life, running for the easy money of drug gang culture. And that shit will get you shot.

Not the user but I remember this post. Neat.

Pop of Quebec is 8.3 mil
Pop of Canada is 36.3 mil
36.3/8.3= 4.4

Quebec has 1.8 mil guns

1.8*4.4= 7.9 million guns in Canada

How many of those are old enfields and how many of the rest are Sks's?

Even official numbers are higher than that. Actual number is closer to 20 million.

Rwmember. Im being conservative. LGS years ago had total around 11. Compliance was low as fuck.

Sure theyre not all semi autos
A lot of.old shotguns and bolt actions.

Build a STAG. 308 >>>> 55shit. 556 is for doing 2/3 guns and dicking around at the range, 308 is a mans cartridge for innawoodsing.

UN officially puts civilian gun ownership in Canada at around 13 million as of 2017. The official numbers by govt approximations pre-1998 was around 10-15 million, and we've added around 10 million since... So more like double the UN numbers in reality.

All said and done, what did your SLR run you back? $2.5k? 3k? The receiver set alone is $1k, so I'm assuming that anyone who is willing to buy that isn't just going to drop PSA parts into it...

It's not that I can afford it, per say, it's that I can't afford not to. I just got into shooting maybe 2 years ago at this point, and I feel like if I don't buy some good shit now, I'm going to lose the opportunity. I missed SVT's, I missed K31's, I missed K98's, Zastava is tied up right now with the Ukraine conflict iirc, the Liberals are being fags (big surprise) and foreigners keep shooting things up making the normalfags screech about muh chilluns.

I make like 25k a year. I should really save for college and buy a car, but I feel like if I don't do it now, some bureaucrat is going to shred my dreams and bathe in my tears. Guns are the only thing that make me feel happy and/or safe in this big gay world.

Our handguns in 2020.

Attached: 6FZt0ZO.jpg (2448x3264, 2.53M)

Poor handguns :(

Attached: 3131.jpg (1800x1173, 169K)

Should I get a 590 Mariner, or a 590A1?

How is recoil compared to something like an SKS? I'm not recoil sensitive, it's just that the SKS is the largest caliber rifle I own because I don't have many guns yet.

Oh wait, fugg I just realized the Mariner has a plastic trigger guard
590A1 it is then

590A1 with bayonet. No contest.

>I make 25k a year
Fix your life please.

AR10s have a very light recoil, the inline buffer and bolt make the recoil super light. Compare to something that recoils like assholes, a g3, the ar10 feels like it's chambered in 556 or something.

Also you can just attach a nice muzzle brake, and it's all good. My mom is very recoil sensitive now, and she can handle my SVT just fine, because of that NICE muzzle brake.

Settle for a WK-180 and make more money. Car is important.

Lol are you implying that it's all a false flag, or are you implying that the cbc should not report on shootings?

Both are equally retarded, btw

stop fucking up your life. Get an sks,a crate of ammo, and call it a day. Get ahead in life.

As someone living in Quebec, I registered my firearms.

But to be fair, I don't have autism, so take everything I say with a grain of salt, since all of you seem to be somewhat on the spectrum

marstar.ca/dynamic/product.jsp?productid=86391

How often does marstar get new deactivated stuff?

>I don't have autism,
If you're here then I have bad news for you user

Do not delude yourself into thinking firearms are a priority, and don't let anyone here convince you otherwise. This is a hobby, remember that.

Not often, that seems to have been a one time deal and they've been trying to pawn those off in "sales" for the last 3ish years.

Why won't anybody make halfway affordable straight pull bolt action rifles in modern conventional calibers

Attached: 1384345837044.png (200x200, 53K)

because semi-auto exists

stop pretending you like guns please

This: also because unless autistically made (or swiss) straight pulls have shitty primary extraction.

This
You can just grab some reloading gear and whip up some light loads for a semi auto until the novelty of straight pull wears off.

Are you fags for real
Am I the only one on Jow Forums who likes to have some variety in his collection

How about the Browning t-bolt?

cabelas.ca/product/66005/browning-t-bolt-targetvarmint-bolt-action-rifle

>Doesn't acknowledge legitimate criticism
Yes, yes, you're special.

Attached: Brainlet EXTREME.png (659x1200, 693K)

>they've been trying to pawn those off in "sales" for the last 3ish years.

What's the sale price?

Huh, I've never seen this before
I'd rather have centerfire ones though

>I'm a brainlet because I don't necessarily want only glawks and ARs
k

Not centerfire, but how about a tacticool straight pull:

store.prophetriver.com/issc-22-lr-scout-sr-black-polymer-unf-threaded-20-straight-pull-action-rifle-full-length-rail-up-front/

I'll see if I can locate any affordable centerfires. Blaser probably doesn't count.

Buy a fucking K31 or swiss 1911 rifle and stop being a fag about "modern conventional calibers" You want variety but you want that "variety" in any number of basic bitch calibers?
No one brought up glocks and AR's but you.

What about rechambering a K31 to 308 Win?

Already have a bubba'd (not by me) K11 in .308 at the gunsmith at the moment but new ones would be nice.
Why do people always get pissy when you dare mention you like manual actions

How about a Browning Maral? You'll have to get someone to import it.

thefirearmblog.com/blog/2017/03/10/bar-action-straight-pull-elegance-browning-maral/

I've seen a few but they are pretty expensive. It's hard to rebarrel a K31 and do it right. Calgary Shooting Centre has some done properly for $1500.

Nice, thanks.
See this is how you reply like a civilized human being.

This is bait

>our handguns
>implying you aren't a sour noguns trying to make yourself feel better about not getting RPAL with an excuse that a ban is coming
I got news for you, in the worst case scenario, hangun owners will get them grandfathered and be able to take them to the range, all a ban will do is ensure no new owners can add to the ranks.
but most likely nothing will happen. if they wanted a bill with teeth, they wouldn't have fielded C71

Attached: 1336976782619.jpg (328x480, 33K)

>chink mak for $400
Whoa, who's selling Type 59's?!?

Now that I've provided options, I'll answer. It's because the US market wants a deer getting machine and don't want to pay much for it. This is why every company makes a rifle like this:
>bolt action
>push feed
>no irons
>plastic stock
>detachable magazine
>cheap

There, perfect deer-getting machine. If you want anything other than that in a bolt action (straight pull or turn-bolt) you'll be looking to the euros and that means bring money. Same goes for if you want irons and a stock that lets you see them without scrunching your head down funny.

tl;dr- save up for a Merkel Helix or a Strasser or a Blaser.

>I want a special snowflake system that's not popular outside of European elitism, because it's garbage
>not a brainlet
Buy an m95 mannlicher.

Attached: Brainlet.png (800x729, 48K)

>I'm totally a firearms enthusiast but scoff at everything that's not semi-auto

Attached: 1517792629704.png (645x729, 105K)

I didn't really get pissy. I just suggested another option which gives a similar experience (using light loads) That lead to name calling and REEEEEE about glocks and ARs for some reason.
I actually prefer manual actions for rifles and shotguns myself. I just don't expect manufacturers to cater 100% to me. Nor do I launch a pee pants match if people think my ideal gun isn't worth the time.
Enjoy your bolt action in slightly different manual of arms.

>Its even better;
citation needed.
I'll probably grab a Modern Sporter though, even with ATRS' QC issues

Attached: DSC04437.jpg (2141x1200, 1.43M)

Legally speaking, would you be less in the shit or more in the shit if you skewered a home invader on a bayonet instead of just shooting him?

Attached: 12431241324.png (800x792, 263K)

QC issues?

>I didn't really get pissy
>Buy a fucking K31 or swiss 1911 rifle and stop being a fag about "modern conventional calibers"

Yea just say you weren't able to load the gun cause the law made it difficult

I wonder how many off these things are gonna get confiscated (or at least attempted to) because some dudes were using it on crown land and some retarded RCMP officer thought it was a restricted AR.
>It'll never happen
Dudes get XCR's confiscated all the time because they're using perfectly legal LAR mags in it plenty of times, RCMP don't know shit.

Attached: 1234132431241243.png (1070x868, 157K)

Modern hunters breaking charging handles, bad feeding on soft point ammo.
personally seen a 4k custom rifle from them have a burr in the action that prevented it from loading rounds and closing the action.

it comes with a FRT letter.
>plenty of times
like one video from 4 years ago
but also probably depends if youre in a shitty part of the country like onterrible or cuckbeq.

>K31's were only $300 a few years back
>GP11 surplus isn't drying up because the Swiss still use it in their machine gun
Not my fault you missed the boat faggot.

Attached: 1423755495517.png (982x980, 807K)

I used to have one and I didn't like it.

>Implying i scoffed at it
>Implying i don't own 3 straight pull bolt guns
>Recognizing a system is bad is disliking it

Attached: BRAINLET.png (474x711, 90K)

Attached: 1534722390927.png (715x655, 371K)

Probably less shit. Easier to claim he was coming at you if you literally impaled him.

when the heck are we gonna get a semi auto shotgat that uses these magazines. or at least an adapter for them.

Attached: Capture.png (902x483, 106K)

>220 bucks
HIGHWAY FUCKING ROBBERY.

can you use 5+ mags from manual action shotguns on semi autos that can take them??

Magazine capacity is dictated by the firearm and ammunition it was designed and manufactured for, not what you use it in.

So yes.

Attached: MAGAZINE CAPACITY FLOWCHART.png (513x787, 53K)

If I remember correctly there's a Turkish made magazine fed pump shotgun that has 10 round magazine that are compatible with that F12 semi auto shotgun.

>tendies having a sale
>trying to buy ammo
>can't get past the check out because the shipping and payment portions are blocked

good lord man you must find out more for us, please for the love of god, for the love of shotguns
for all that is good in the world
sauce dude

It was the uzkon AS46, apparently, though from what I've read the followers are at a different angle, but maybe you could take the follower from the F12 mag and stick it in the AS46 mag.

thinking of putting it in my mk12 but I don't want to spend $60 to be wrong