AR thread /arg/

/arg/
AR thread
Bullyzone
Cancer containment thread

iwi makes some of the best ammo edition

Old

Attached: 1461599705798.jpg (3456x2304, 1.99M)

I want the one in the middle
Left is ugly and right looks crazy

what porn is this from?

In for HUE ammo > jew ammo all day, every day.

Attached: 65sda4g65adsf4g6as5d4g6as54.jpg (1964x1138, 1012K)

That knockoff atlas any good?

are those PSA/FN CHF any good?

EXCELLENT in my experience.

Colt guy here. I am putting exactly 30 rounds in the mag, and it doesn't lock in. It's not 31. As long as the bolt is locked to the rear I can put it in. Sure, I can keep the bolt locked to the rear as a load a mag, but I shouldn't have to do that with a colt, nor do I want a mag loaded with 28 rounds.

Sounds like Olt quality

Functionally it's great for an extreme budget bipod. Held up to its first range day yesterday just fine.

That's a complete FNH upper with a PSA lower. the PSA upper is sitting by itself without a lower very close to being thrown in the dumpster.

Attached: 6df54g6d54g6d54gsd.jpg (2388x1498, 1.56M)

are the PSA FN barrels the same as the FN Ars? are the PSA defective ones? I heard they were the FN rejects.

I dry fired a Cobalt lower at a gun store once. The manager flipped out. I shrugged and left.

What a disappointing Shot Show
What happened to the ATACR 1-8x with the NX8 reticle?
What fucking 1-8x do I buy now?
Seriously leaning towards the Accupoint since the gun is heavy anyway and I'm reading that it has better FOV

Attached: SR-25 Battle Rifle.jpg (3840x1698, 2.85M)

There's lots of talk, I doubt many people outside of PSA know the truth. FN makes a fuck load of barrels to a fuck load of different specs. After experiencing their nitride (((quality))) on the dirt cheap upper I would steer as far clear as possible. Most inaccurate AR barrel I've owned, will give it another couple hundred rounds to break in but I'm not expecting much if any change. Their "premium" barrels have treated me well enough in the past, pretty average accuracy, service grade. Their QC in general chaps my ass though. Have had more canted front sight posts and other small bullshit from them than any manufacturer to date.

Attached: 243rtlkjwhefgkjwhrfkwf.jpg (1912x1069, 1006K)

They're fine.
They arent "rejects" either

PSA has been using them since before FN was offering their civilian line.

I'm sure they're made under contract to a certain spec. It might be a looser spec than milspec, but who knows. I definitely wouldn't trust internet message board rumors on them being rejects.

In my experience they group about 1.5 MOA with match ammo, which is pretty damned decent with a chrome lined barred in a gas gun.

The nitride ones arent made by FN

FN only makes the CHF barrels, and are specifically attributed to FN in the listing.

Anything else, including the nitride, parkarized, and stainless barrels are all not made by FN

why are they numale-ing

I was referring to PSA. I understand only the premium barrels are FN, hence why I referenced them.

Attached: 656sd4gf65s4fd6s5df1s6df54.jpg (1512x2016, 1.03M)

thanks bros, I have a bud selling me his PSA/FN barrel with 100 rounds through it for like 80 bucks, he fell for the stainless steel meme, so hes letting it go,

I have two colts and neither one does this. What magazines types are you using?

Attached: IMG_1195.jpg (3264x2448, 2.38M)

Alright boys, now that Trump has cucked on the wall and the feds are back to work, how long until I get my stamp? I was expecting literally any day right when the shutdown hit.

Attached: 20180517_114252.jpg (1600x900, 1.16M)

That's a solid deal. Enjoy.

Attached: 6x8f4g6ds5f4g6df54gd65fg4.jpg (1448x1394, 868K)

thanks man, hows the cowitness on those fixed sights? I want to check em out, since I like fixed front sights not sure about the fixed rear though

The IMI stuff is more consistent where muzzle velocity is concerned, but damn is the magtech loaded hotter

Attached: CBC M193.jpg (720x1280, 337K)

I stick to lower 1/3 on dots. Works great with some fixed sights. Also helps for longer shots since getting behind the small rear peep kills any and all dot glare.

Attached: 65s4df65s4df65s4fd65s4fd.jpg (1868x1637, 1.37M)

My magtech and cbc M193 and 77gr OTM is all consistent as can be. Only shorter velocity spreads I could get through a chrono was from expensive match stuff. PPU M193 is surprisingly consistent as well.

Attached: how not to shoot.webm (1280x720, 2.27M)

Magtech best ammo

Attached: this.jpg (30x35, 785)

thanks bro, ill check em out.

You put aadlands on that turd scope?

I miss the summer

Attached: P1260853.jpg (4592x2584, 1.84M)

Wait till Wednesday night

I am praying I get mine before they shut the gov back down again. Also, Ted cruz and some other senators reintroduced the HPA in a low key move

(Crying, crying hard). Since the weather wont let me be great I picked up this thing.

Attached: MantisX.jpg (4032x3024, 1.78M)

Just be a man and go to poynette Thursday morning with the -50° windchill

Ha, I'll see you there before sunrise

Attached: ATF + WI + VP9.jpg (1919x1081, 543K)

Fire it up and give us a review. Always been tempted to grab that or one of the knock offs to kill boredom around the house.

Attached: 6u54f6g5h4f65gh4f64.jpg (1613x1071, 714K)

Im going about 9:30 i think

Its worth it and can be used on rifles and pistols.

No fucking way I'm leaving my warm home to play with you fuds.

Attached: IMG_7772.jpg (4416x3312, 3.62M)

Just get bundled up in dead bird.

Attached: IMG_20160405_104908515.jpg (3519x1655, 1.76M)

Why two pairs of the same shoe?

Post your shittiest opinions

20" minimum barrel length, if you want a shorter gun you should get a bullpup.
BUIS only work with non-magnified optics and must be fixed in place. You won't have time to screw around with flip up and quick detach things in the high intensity do or die combat situation you're trying to address.
Handguards should stop before the gas block. Longer is dead weight.
Standard issue furniture is seriously fine and there's no rational reason to use anything but. If your M4 stock rattles you can shim it with some kind of tape or slightly thicken the buffer tube with paint.

Attached: 1540438675564.jpg (1200x1170, 146K)

Different colors

gonna build a 204 ruger upper. any suggestions?

>any suggestions?
Don't.

Why not?

>Handguards should stop before the gas block. Longer is dead weight.
How short are your arms?

I have a bunch of psa ar15s and I wanna level up, are the BCM rifles a decent step up from the PSA ones?

imagine if you got dropped in those hills and these 3 were hunting you. jesus

>shooting with your supporting arm fully outstretched

How small is your brain

>I have a bunch of psa ar15s
No you dont

Im not suggesting 24" handguards

>his handguard doesn't extend past the muzzle so it doubles as a flash hider

The one that came with it - pmag.

r8 my pistola
getting a vert grip and light later

Attached: IMG_20190128_163943.jpg (2055x1481, 1.02M)

Was gonna give a 3, but for them integers
4\10

Attached: EAD30858-84BC-4F42-B7C0-A9E69C7D21EA.jpg (717x717, 80K)

because scaranon is nigger rich.

Lucas Botkin in the middle

TactigalGearJunkie why is your shit so faint now.

Attached: WP_20190128_001[1].jpg (3072x1728, 1.98M)

Attached: 4e79860ab45aacd6d4630e2260a9fcb8.jpg (633x667, 82K)

Attached: WP_20190128_002[2].jpg (3072x1728, 2.31M)

>sketchers
>arc'teryx
Travis Haley GET OUT

Compared to the stronk, bold white of the Asriel cover.

Attached: WP_20190128_007[2].jpg (2607x1728, 1.54M)

>sketchers

I pick right because crazy

>Ted cruz and some other senators reintroduced the HPA in a low key move
shit man who are they trying to get killed this time

It'll never pass the house, but if it does I'm going to go buy a fucking ton of cans before the first autist shoots up a mall or school with one on and they say that it allowed him to fire 200 more baby killing rounds per minute without anyone even knowing a gun was going off.

I have a .204 bolt and love it. It's fast as fuck and wrecks coyotes.

Are red dot + magnifier combos like pic related still a thing in 2019? I like the idea of having a dedicated close range sight that can be pushed into longer range rather than the opposite, which seems to be the case for low power variable scopes.

Attached: Photo-1-GAAP-100000-SIG-030.jpg (600x400, 53K)

Jokes on you, they're all crazy.

Anything you'd engage at 3x can likely be engaged with an unmagnified dot.

Would still be easier with 3x

It isn't really if you're doing anything other than group-focused target shooting.

You must not have bad eyes.

Do I zero this at 6/3 or Z? Doing a 50yd zero on a 16" 5.56 PSA kit.

Attached: MT-950RS03 Leapers UTG AR15 super slim fixed rear sight.jpg (2448x3264, 2.14M)

What's the /arg/ JUST AS GOOD carbine rail?

Bcm

Imagine having such incorrect opinions

Attached: 1543646304102.jpg (464x606, 37K)

You tripfags realize there's an entire website for this shitty /general/ you put up every ten minutes, right? Why would you come to an anonymous image board to do this shit?

a bendy bill rail.

This RAZOR HD GEN II-E finish color dank af

The gen 2 is being discontinued

The GEN II is being discontinued for the GEN II-E which is what he's referring to you mong.

In case any of you anons are trying to set up an ambi/lefty build. The Geissele Maritime Bolt catch, and the KAC Ambi Mag release are compatible.

Attached: Ambi Bits Close Up.jpg (480x360, 43K)

The gen 2 is being discontinued for gen 3 newfriend

never mind then it would seem I am the Mong.

When did you submit the paperwork? My last few took 7 months

Attached: EDB81251-DA7A-4CE3-95A0-D100111574A4.jpg (2335x859, 560K)

>KAC Ambi Mag
I like this!

Attached: P1300165.jpg (4592x2584, 745K)

cashed like april 20th or so

Are you 100% sure you didn't load 31? The gen2 pmags which I think is what you got can very, very easily be loaded with 31 rounds.

what are some small tools that make AR assembly much easier? Like roll pin starter punches and snap ring pliers.

>420, dude weed LMAO

roll pin starters are nice
pivot pin detent tool is helpful too if you build a lot of lowers

>pivot pin detent tool
Use a business card

>Sandman S
Solid. You're going to love the Key Mo.

Same. I prefer the heat and sun.

>MI rail
>Polymer piggu fattu MBUS
>No ambi selector
>Who knows what barrel but you were ignorant enough not to mention it before asking for a r8 so it probably is trash
What mount? What optic?
They're not sending their best.

The new Unity Tactical Magnifier mount makes them even more competitive. I like them.

Based user. This is literally a top fucking tier post. Good shit.

>Magpul vertical pic rail grip on pic rail section of outdated URX 3.1 you bought for looks
Disgusting.

Attached: 20170725_153106.jpg (2258x1270, 2.19M)

knipex smooth-jaw channellocks
electrical tape

Hate my AR, but say something nice about my kitty

Attached: 20190128_210655.jpg (4032x3024, 3.87M)