/ARG/ AR General, Tripfag containment, poverty containtment

No, because you'll be the one shooting the gun, which is the problem to begin with.

Attached: rich fags.jpg (720x440, 332K)

surefire 3 prong or warcomp and a maybe a warden or for sure, an trainer.

Its fkin bullshit this guy has a can and I'm waiting almost a year

>4.5 inches gap between barrel and end of hand guard that needs to be cleared
>muzzle devices that direct gas immediately to the sides
You're home user

Attached: welcome.jpg (1024x576, 121K)

Its because i didn't refuse the penis inspection.

>and maybe a warden or for sure, a trainer
did you forget to read the end of the sentence, brother?

Well KAC URX sole form of anti rotation is sheer torque values, but I don't think they make a 15"

By the way, I am looking for a good 15" rail to go with my 20" build that has no anti-rotation.

Not gonna lie, stopped reading when I immediately identified a retard.

How are they supposed to inspect my non-existent penis

it's ok, just put the mirror face down and it won't have that effect on you.

What's your guys' opinion on a 10" suppressed SRB for home defense?

hey flamers,
the jizzlee charging handle has a little lip on it so the gun doesn't fart in the operator's face. what other charging handles have that little lip on it?

I know you were trying something clever there, but it didn't make any sense, smooth brain. Good luck next time.

as long as your home is a mile away from your neighbors, who cares about overpenetration?
if you're in an apartment, that shit is going through walls and there will be collateral damage, possibly to actual people.

BCM

thanks, retard.

just get the shitty AIM Sports one and file off the anti rotation ears. they're small.

Can will be taken into evidence. Go for it if you're fine with that. Just tell your lawyer you were in a panic and the NFA setup was the first thing your hand closed on when you went for the safe

cool. thanks, user.
any others?

the old VLTOR/BCM CH had them not the new ones, too bad they dont make the old CH anymore those were great, new ones suck.

>not wanting to sniff raifu's toots

I'd get the gun back after I was cleared of any wrongdoing though right?

Are the new PRI ambi CH's the new gucci CH's?

Attached: r43.png (580x426, 400K)

Why would they be?

>ambi CH's
ewww
fuck no.

Pri hasnt been relevant in twelve years

Honestly, even if you live in some socialist hellhole that won't ever give it back count its loss as cheap life insurance and completely worth it for likely retaining most of your hearing.

Attached: Novac.jpg (640x480, 40K)

Are there any other pistol grips that have a rubber grippy texture like the k2+

>ewww
>fuck no.
stop being poor

God damn will Optics Juden just do a fucking sale. I swear to God they better have a 10% anything code tomorrow so I can buy the rest of my shit and save 40 bucks.

>Not liking something makes me poor
sure thing.

Hogue? LWRC has some snakeskin looking grip that is rubber coated and kinda what you're looking for too.

>Not liking something makes me poor
>sure thing.
lets see your AR.

ergo

In theory, eventually

Some people say just take the can off. But I don't know how thorough police searches are. If they find it and it's still hot to the touch and they catch you in a lie about what you used to defend yourself with, that would be not good.

Not a bad argument

Already posted.

Everyone post brass deflectors

Attached: 20190217_093338.jpg (4032x3024, 3.21M)

fuck

>larue.com/products/larue-ultimate-ar-15-upper-kit/#panel1
can someone convince me why i shouldn't just buy this right now? looks like all i would need is a lower

its a great addition to any bendy bill rail

Attached: BENDYBILL.jpg (1382x2048, 2.3M)

Please don't overuse Bill memes, you'll devalue them.

Because BCM is better

Keymod lmao

were at peak bill memes after he sued LMT.

You can pick different rails idiot.

I came in here ready to shit on you, but for $800 literally all you're missing is the lower. That is a solid deal.

Idiot

BILL INVENTED THE TWO STAGE AR TRIGGER MMKAY!

Idiot

makes sense, its a bendy FCG, hes good at that.

aside from pretty colors and flexing on poorfags, is there any real reason to buy more than a nickle toolcraft bcg?

>spongebob image from tumblr
How to be discredited 101

i like my fortis clutch more

Attached: 456456564565.jpg (682x918, 121K)

The memes

nobody buys the nickle toolcrafts, people buy the $250+ cryptics(toolcraft) BCGs to flex on poorfags, I want to check out the DLC toolcrafts.

Thats not how you greentext, newfaggot
Post AR

>so poor you can only afford half of a charging handle

Attached: 1489806865973.png (450x472, 189K)

i was looking at that mystic black bcg but i just couldn't bring myself to spending the extra 150 bucks on shinies

looks awesome but it doesnt warrant the extra money, I hear the toolcraft DLC (diamond like coating) are equally as smooth an easy to clean.

Its worth it.

Why would I lie though?

Why can't local shops just charge reasonable prices for lowers? I get that they have overhead so a markup is expected, but I can't bring myself to pay $109.99 for the exact same receiver I can get online for $44.99

wish i knew that dlc bolt was a thing before buying a nickle bcg for about the same price.

>shooting off hand
>malfunction
>gay nigger has to switch hands to clear it because he couldn't be bothered to buy the modern standard because he is thooper thpecial

shopping local is a meme. I like the guys at my nearby gunstore but the only money they get from me are FFL transfer fees.

>b-but if something goes wrong in a weird situation you may have to spend an extra second to unfuck yourself!

i'll take that risk

did we ever get a definitive answer on whether you can convert a SBR to a 16-inch barrel for transportation purposes? Specifically talking about moving to Illinois where you may not have any NFA items, including SBR or suppressors.

What lower are we talking here

The colors are pretty

Attached: IMG_Green_Story_20190216_073948_processed.jpg (899x2001, 314K)

>FFL transfer fees.
To be fair that's almost pure profit for them

Were you dumb enough to buy a bolt carrier made out of copper?

problem is that once i get ONE colored piece i'd need to coordinate the entire gun to match it. the nickle plating is already risky enough.

>Out of copper
Yes, user. It is made of copper.

Attached: 1451542581074.jpg (1024x683, 330K)

I'm not shopping local to be a "support local bidness" fag. I just hate the hassle of organizing a webstore mailing a receiver, then wait for it, then go pick it up whenever it randomly comes in the mail. I'd much rather just be able to stop in the nearby physical store and buy one and just be done.

>he doesn't have a bronze age AR15 in his collection

or
you could just reach over and pull the CH with your support hand.

Ultimately it comes down to what local and state police are willing to nab you for. Do you trust Illinois state police?

Also, I'm pretty sure ATF considers NFA illegal if they're illegal in your locality, regardless of federal law (hence CLEO notification)

I think theyre fairly knew, only options were phosphate and nitride coated, ill probably check one out and report back. they look pretty shinny to me

Attached: Toolcraft_DLC_450_bushmaster_Bolt_Carrier_Group-400x400.jpg (400x400, 17K)

Too big. Do they make a medium latch?

the BCG wont be the only thing flexing, that bendy bill rail sure will.

Or you could just not get a snowflake ch and not have to worry about fucking with your muscle memory

whilst you guys are fighting over charging handles...
recommend me one to keep gas out of my face while shooting a suppressed SBR

9310 is better, but they charge more for Carpenter 158, lmao

Practicing huffing your Daddy's gas until it no longer phases you

faxon bcgs are silky slick as well

yeah i don't care about the shine i just want the smoothness.
i just tried it, due to the scope placement its actually kind of awkward to pull the handle from the opposite side but its doable.

i thought C158 was the standard?