Anyone else still rocking cheese grater technology?

desu i feel embarrassed when ppl see my outdated quad rails on my guns :(

Attached: 50512906_2575728119109817_8620743372091134269_n.jpg (1080x577, 42K)

Other urls found in this thread:

centurionarms.com/product-p/0609-cc.htm
twitter.com/AnonBabble

Let your balls drop and you'll no longer give a shit what anyone thinks about anything.

Attached: bushmaster.jpg (500x253, 75K)

Quads are good but heavy. Remember that everyone makes an adaptor for mlok or dickmod to attach pic rail accessories

It's not as embarrassing as keymod.

I actually like quad rails, sometimes. The rifle in your pic looks great, the one in mine makes me puke.
For shorter rifles, let's say carbine and pistol lengths, quad rails usually looks alright. Anything longer than that starts getting stupid. Also, impractical since that's really when you'll start noticing the weight increase.

Attached: AR-15-Quad-Rail[1].jpg (1000x300, 53K)

I never stopped. Everything mountable out there has an option to take it, it's inherently sturdy, and a lot of the offerings now are quite light.

The rifle-length quads were never not retarded though.
> Remember that everyone makes an adaptor for mlok or dickmod to attach pic rail accessories
You should feel bad for even acknowledging the failure that is dickmod and those adapters invariably create a clunky, awful mounting situation.

Attached: WP_20190209_007.jpg (3072x1728, 2.02M)

>still have delta ring on my midlength
>unironically going to get one of these

Am I going to get bullied?

Attached: DD 10001-5.png (500x338, 304K)

A general purpose rifle doesn't need a free floating barrel. Fight me.

I did that route and honestly I'd suggest just taking off your barrel, removing the delta ring assembly from the rear, and getting a freefloat quad that uses the standard barrel not. It won't even be that much more expensive.

Attached: WP_20180519_008.jpg (3072x1728, 3.07M)

I do on one of my ARs user. I'm never gonna make it :'(

Attached: Sport II conversion.jpg (2048x1536, 1.17M)

90% of the benefit of a freefloat rail isn't a marginal increase in mechanical accuracy, but the fact that it negates any POI shift if you put pressure on any area other than the one you used when zeroing the rifle. It introduces consistency for something as important as your bullet hitting where your reticle is. That's something even a general purpose rifle would enjoy.

The omega rail is the best delta-ring quad rail ever made. I run one and it's a nice compromise
Plus it looks like sex

I came very close to getting it but settled on the MI quadrail for some reason. Simpler times.

Attached: WP_20150426_005.jpg (3072x1495, 1.48M)

I like quad rails.

Attached: 20181227_172950-913x327.jpg (913x327, 105K)

i have quad rail on my hk mr556 and colt 6940. i also have slick side noveske and lwrc but i like the quad rail still.. i dont get the hate for it.

this lol

Attached: keymodcompatibility.jpg (480x320, 26K)

best rail

Attached: 01ce48ad672488dd420a0d932cf8a6ebe732bad5ea.jpg (2040x790, 641K)

Breh do you use a flip-phone camera.

Attached: WP_20181229_002.jpg (3072x1728, 2.44M)

the DD omega rail is a freefloat rail that uses the standard barrel nut with the delta ring still on. it is basically a drop-in freefloat rail, which is pretty clever.

I'm not super confident in it's ability to hold zero, but it's honestly one of the most aesthetic rails out there period.

Not your gun

you're better off than anyone with Keymod or a BendyBill™

The fact the handguard cap is still on, and likely makes contact with the rail, doesn't really give me a lot of optimism. Honestly at that pricepoint I'd just get a C4 rail for a bit more. Lighter, guaranteed freefloat, does pretty much the same thing minus the delta ring use.

there should be a tiny gap between the handguard cap and the rail. You can also take the handguard cap off if you want.

Omegas without the cap look like AIDS, that half inch gap and exposed gas tube triggers the shit out of me.

the cap doesn't make contact

>exposed gas tube
by the same logic you should hate FSB's. an exposed gas block isn't any better.

>by the same logic
That's not the same logic or any sort of logic whatsoever are you fucking retarded? How in fuck is an exposed FSB similar to an exposed tube, especially in the aesthetic sense? Holy goddamned shit.

post a pic of your rifle with the peq, what happened to it?

I turned it in to the police during a gun buyback.

of fuck you too then

Attached: doublebird.jpg (800x778, 47K)

Attached: 636376759.jpg (465x440, 28K)

Bitch

Attached: WP_20190119_005.jpg (2274x1728, 683K)

Attached: DF1FBD65-AB02-4367-B822-5BEB33F7DB56.jpg (3724x2096, 2.07M)

Never saw a reason to change mine.

Attached: 0F5D5D13-8DD1-44B1-80E1-2BB041050809.jpg (2436x1125, 821K)

What’s the rail on that?

Very light and durable and rock-solid mounting, but you kinda have to spread your wallet's buttcheeks.
centurionarms.com/product-p/0609-cc.htm

god damn thats the stubby vfg i was asking about before

Is it a Tango Down?
does it come with the QD?

What mount is that for your weapon light?

An older model Vltor.

This desu, my 300 upper came with some cheap Mlok rail and I switched it out for a 9 inch quad rail. I actually prefer the feel because before it didn't have much weight in the front.

Got my CMMG Mod 4 with a KAC RAS already on it for 300$. Good to know people.

Attached: image (7).jpg (3264x2448, 2.24M)

>$94.45
The QD version is $30 more than the already overpriced base model. Hope being super tactical is worth it for you, because in my opinion yall are getting taken for fools if you buy that.

Attached: tdvfg.png (1481x677, 416K)

Holy fuck that's retarded pricing.

I like the retardedly strong attachment method since I use my VFG heavily, often as a brace or monopod. Also it's another way to flex on poorfags. So I bought two.

Attached: WP_20190128_007.jpg (2607x1728, 1.54M)

im a quad rail fan

Attached: ar15_03.jpg (1620x1080, 431K)

Very pleasing picture.

I almost >inb4 poorfag'd.
Like clockwork, any time a person says something costs too much.

yeah centurion is fucking fantastic, absolutely the best quad rail option out there baring a 1 piece upper like LMT offers or the 6940

>Let your balls drop and you'll no longer give a shit what anyone thinks about anything.
This. Giving a shit about opinions is what females do. You know those strange creatures that have a wet, sopping hole where their cock should be.

t. guy who gives a shit about the opinions of others but tells other people they shouldn't online behind a wall of anonymity

were social creatures, its only normal to care what other people think. people who don't are autistic.

if you add really long rail sections, you can convert mlok into a quad rail :^)

Attached: 20190215_092609.jpg (2560x1440, 1.54M)

I love my classic quad

Attached: F3F52DED-DED8-42CC-BA74-930E2136AB01.jpg (2048x1596, 553K)

most of my service rifles were DD quad rails, shit's OG

Attached: Individual Photo (OpSec).jpg (2448x3264, 2.83M)

LOL@ blurring your face. You're SOO important, user. Fucking queer.

Nice looking rifle. Well done.

airshit
>spotless gear/clothes
>spotless sling
>cheap chink pc
>no lid
>no unit patches

I actually want a quad rail but can't find shit for my low rail dpms pattern ar308. Gonna probably just go with SLR works MLOK rail.

You wont ever use your rifle outside the range and even if you do have a dd214 it will say failure to adapt during basic. Post all the rifles you want, can't prove me wrong discord tranny.

Attached: g.jpg (960x960, 222K)

Get rekt poverty scrub.