Canada General

New here? Want a firearm license? Read this: pastebin.com/Ndb2jSAu

Previous thread:

Attached: 1406086861081.jpg (404x428, 138K)

This is a nice thread, only post nicely

Attached: venez.jpg (1600x990, 82K)

ok

Attached: fren.jpg (1000x800, 61K)

Well yeah, they still assign a FIN to the poly80 lowers. And if they find an incomplete one they won't pester you. But we're saying that if they find a complete one they would have to prove that it was finished more than 30 days after finding it to charge you with anything.

At which point you add a serial number to it and register it.

Given all this talk, SOMEBODY here must have experience with purchasing one from Aztec.

Difference is purchasing an 80% lower right after the bulletin was issued by RCMP from the likes of CTS Supplies led to a piece of paper akin to registration, which had the serial number part empty and identified it as an incomplete lower. While Aztec does not register it as a lower at all and just confirms your RPAL and sends the poly80 your way, so far.

Is there anything that traces it to you though?

Yes because ctcs pre registers them, as stated on their product page. Asstech doesn't, they assign a FIN to each lower they bring in and leave it to you to finish registration. So once you're done completing the 80% you're supposed to put your own serial number on it and call it in to the CFP to have it registered formally.
Some people do, some people don't. Why don't you get one and try it out?

The Aztec one? The only "trace" would be the record of the RPAL confirmation through the online CFP system, as well as the record of sale of one such item on Aztec's online records (and your ID/account on Aztec's site). There's nothing uniquely identifying the particular 80% lower connecting it to you physically though.

Yes, CTS registers it with FIN (no serial) to your RPAL prior to shipping, while Aztec does not. CTS no longer sells 80% lower, and are only importing 100% lowers now.

How would the RCMP tie a particular FIN of a poly80 to a particular finished product if there are no identifying markers on the poly80?

>CTS registers it with FIN (no serial)
No, they serialize it. It's on the product page, dude. You're right about them being 100% completed. They are serialized.
Sales records

first for fuck trudeau

Attached: IMG_20190227_183455295.jpg (1836x3264, 1.25M)

based and VZ58pilled

went shooting for the first time since i got my PAL today. had tons of fun. that is all. :)

Glad you had fun user, welcome to the club.

what were you shooting?

Anyone else is waiting for something in the mail?
>that is all.
No, it is only the first of many.

Attached: hype.png (723x391, 18K)

How mangled are the receivers in cock-and-click dewat FALs?

Who sells dewat AKs that don't have the mag welded to the receiver?

Dubs for a free Canada

Indians and magapedes

a maverick 88 and an sks

based

HOLY DUBS

dubs for blue wave?

GIMMI MY LAND BACK WITEBOI

Attached: Firewater43.gif (174x320, 1.83M)

Holy crap I feel if we get any more Trudeau and the ban list will just magically explode

Attached: IMG_6830.png (935x526, 403K)

Anyone else dislike French people ?

Attached: faggot Frenchman .jpg (1280x960, 319K)

I told you last time. Get civilized, and I'll help you with your property rights.

>also gets dubs
We can't keep getting away with this!

WTF TRIPS

Trips of luck

Attached: a6jBmjC.jpg (1600x1200, 136K)

Back to facebook boomer

We would like to recognize this land we reside on as treaty land, and if you are a white male you are privlaged.

Attached: 2022019103440.jpg (720x714, 85K)

Go back to the bush you french Indian

>$2000
>needs a screwdriver for takedown
hard pass

>leaf thread
>all these fucking GETS
wtf I love leaves now

Based

What made you hate us before?

Stop doing it!
Everything is a trade, guyin. Try to work toward a society that is more advanced than the median African society and we'll talk.

Attached: SK_grain_train_end.ogv.jpg (1920x1080, 92K)

>muh treaty
what are you going to do with it? chug listerine and fuck your cousin? I didn't sign shit. I was born here, fuck you.

So I passed my CRFSC. Box 16d asks if I've been diagnosed or treated for blah blah blah behavioral or emotional problems. I'm not diagnosed with anything, but I am taking pills for mild anxiety. Do I still mark yes and explain?

were you ever held for psych? if not, the RCMP has no access to your medicine prescription records.

sell me some xan and I'll tell you what to do

Y'all are too polite, it's weird. Stop apologizing for everything

I genuinely did not realize just how disgustingly polite we are in Canada until I started traveling for work and pleasure...

I've never been to a psych, no. I'm really mostly a normal guy.

memes. Canadians are cunts

>Y'all are too polite, it's weird. Stop apologizing for everything
Oh man, you're gonna HATE Japan and Germany.

New RPAL fag from last thread. Ive decided to get a P30.
Honestly seems like a great little pistol

then don't check the box silly, otherwise it'll take 8 months and lots of back and forth and doctor's notes and shit.

>Tfw no black furniture for my 858
H-hey, wanna swap for a beaver barf set?

Not him, but I'd be down.

i like my black furniture too much. i'm willing to buy yours if you want to sell though, i've been looking around a bit for beaver barf furniture.

what the actual fuck

what gun is everyone buying to celebrate the downfall of trudeau?

I'm thinking of a WK since Wolverine is based

Attached: Jian-Ghomeshi-and-Justin-Trudeau-620x413.jpg (620x413, 54K)

Nope, got it today. :)
Roughly halfway done collecting parts for my AR.

More parts.

Attached: 20180419_115547.jpg (4160x2080, 3.21M)

I'm going to shave my hands and take my dog for a walk.

I'm not celebrating fucking anything until he gets voted out and C71 dies.
It's not over until the fat lady sings. Nobody should be celebrating yet. You should be buying as many guns as you possible can in the interim, though.

You have a complete set? That’d be appreciated. Contact me at my burner in the name section.

More parts it is.

>all these failed doubles

yeah we didn't get away with it

Sent.
Fully expecting a full entry team in like ten minutes, you won't take me alive.

FUCK Singh
FUCK Scheer
FUCK Trudeau
That is all

Attached: 2019.jpg (842x1288, 185K)

N-NANI!?
LUCKY 7s

Attached: 1517369034428.png (296x300, 103K)

and FUCK an actual chance and fixing our unjust laws, right??? The PPC was born to early, born to late. A vote for them is a vote for nothing- the CPC is the only chance at getting a good PM

Fuck Max, he's a crybaby cuck

Regarding the urban dweller who doesn't want to make a blower forge but wants to melt aluminum...make an Arc Forge.

>what gun is everyone buying to celebrate the downfall of trudeau?
My accretion rate will remain unchanging. I will not shame myself by letting my behavior be dictated by that cunt, one way or another.
That being said, I'm either looking at getting a Bakers Rifle next or the shortest over-under 12ga I can find.

I'm sure Scheer will totally be trustworthy after stealing the leadership election from Bernier.
Don't forget to burn the ballots in October, eh!

PPC is based but right now exists only to split the conservative vote.
Push for CPC to toss king Sock Boy, build PPC for the next election after.

Posted in the old "new" thread before it got deleted, so I'll post again.

Anyone have experience with these turkish pump shotties?

Attached: 20171109_131920-1500x850.jpg (1500x850, 209K)

PPC candidates can't even get half the votes elvis impersonators get. Stop being delusional. Vote for max next election.

I've got a Churchill. It's pretty basic, but for the price I wasn't exactly expecting a Beretta.
I live in an NDP stronghold so it's kindof a moot point.
If you're going to be voting strategically, then look at your riding and figure out whether voting CPC is necessary or whether you can vote for the party that best represents you.

What is even going on in this general O_O

>Leaf me alone!

Attached: SKS COME AND TAKE IT.jpg (1600x990, 193K)

holy smokes boys, lahey must be on the liqour again

hope they dont shit on you, user.

>Who sells dewat AKs that don't have the mag welded to the receiver?
i bought on recently but it's a 556 norchinco. it's a recent dewalt too so it's weird. buggers took the bolt out.

Wendy is a demon, a GOD DAMN DEMON
SHE SMELLS OF BRIMSTONE, SHE'S A FUCKING DEMON AHHHHHH

I kinda want an edit of her to look like the beings in They Live, now...

Don’t buy turkshit your supporting ISIS unironically

So, in terms of Canadian made AR-15 stocks, what options are there? The only one I can think of that isn't Diemaco is the NEA stock like in this pic, but those are discontinued, aren't they?

Attached: 556PDW1-1.jpg (1024x428, 61K)

your wish is my command

Attached: wendylives.png (1071x912, 2.14M)

Haha, nice

I wouldn’t worry about it.

Also, plz respond

>that gap between the receiver and handguard
throw it in the fucking dumpster

You've never built an AR before, have you?

Not my rifle. I only have the pic for the stock.

Attached: 556PDW2-1.jpg (1024x432, 54K)

make like a tree and frig off

Attached: 1539471537160.jpg (406x624, 74K)

t. eastern scum boomer

M̵̻͙̻͈̙̙̳̼̀͛ͦ͛̀ͭ̒ͦ̀Ą̰̩̣̐̏̂̀Ķ̨̱͑̈́͠Ĕ̴͍͙ͤ͢ ̸̟̫̒̋̌̎ͮͣ́̓͛H̝̬̽̇̌ͬ͛̽̓̃̀Ē̵̺̱̭̠̰̓͌̂̑ͬ͢Ṟ̸̔͟ ̡̧̮̪̦͛͆͗ͅC̥̝̝̱̄̃̉̃̇ͅU̵̼͍͉̓͊̀̕M̦͈̭̝͚̙͒ͦͯͬ̄͆ ̢̣̼͔̙͒̑̐̚Ă̺͍̥͇͙̍̋̉ͩͩ̈́̀N̴̶̷̘̞͍̙̮̙͈̈́͌ͧͧƠ̖̤̣̦̟̟̳ͩ͌̎̔̀́N̸̪̗̺ͨ̀͗̈́̀̏̍ͤ

Attached: 1510398675516.png (1024x896, 18K)

Attached: 8022019231202.jpg (1200x900, 81K)

Attached: mothers that can stuff a black cock up their ass.jpg (980x551, 158K)

fucking roasties

Attached: 1551160337281.png (1000x890, 854K)

>You were at the PolySeSouvient rally, right user?

Attached: cukierbuyback.jpg (600x393, 66K)

Wendy is the master of the fat girl angle shot, or maybe I'm just incredibly depraved, looking for photos to edit and some of them she doesn't even look that bad, but some of the photos from the senate really betray her status as a hideous goblina whale. I don't even know anymore, what sustains her? Soros bucks and SKS slag?

What's a fair price for a set of vanilla polymer VZ58 furniture