Which South American agency was buying these?

Which South American agency was buying these?

>Contract over-runs from a South American agency. These LM308MWSODG weapon systems are anodized a shade of what we call “Canteen Green.” Due to the nature of anodizing colors, there are slight variations in the shade throughout the upper and lower adding to the unique nature of the weapon. This is the last time these over-run rifles will be available to the public and will only last a short time. *Web sales available direct to retail customers. All serialized items will require an FFL transfer*

lmtdefense.com/?s=blowout2019

Attached: Capture.jpg (1863x902, 160K)

Other urls found in this thread:

recoilgunworks.com/spm16-ar15-carbine-p-40510.html
twitter.com/SFWRedditImages

They're hidden in the Venezuelan humanitarian aid.

Attached: sbl.jpg (833x469, 55K)

is this a good deal?

Attached: Capture.jpg (890x717, 37K)

or these

Attached: Capture.jpg (1815x692, 67K)

What's the point of a 16" .308?

Attached: nathan-0130.png (480x606, 233K)

What length should it be then?

Not for those prices

Something nearer to the maximum velocity length, 24".

Attached: 0927181912.jpg (2560x1280, 812K)

Shooting at 800 yards max instead of 1000 yards max, because you're inna jungle/slums and need the ease of handling more than the effective range

it's not as stupid as 14.5" 5.56

Yes, relative to their regular MSRP. Never hurts to shop around though.

Some youtube nigger was hitting 10x12 plates at 1100yds with his 13.5" LM308

Length isn't accuracy. it's velocity. Good for shooting in wind and maximizing kinetic energy at range but not necessary for shooting a tight group in good conditions granted you're using the right bullet design/weight and twist rate.

Attached: 1549725530391.jpg (818x578, 34K)

308, 22 inch. 7mm-08 or 6.8-08 24 inch.
5.56, 20 inch. 6.8spc, 18 inch
06 family brass, 24 inch.

Certainly a screwdriver can be used as a chisel, but wouldnt you rather have the right tool for the job? If I'm kicking doors I want a 16" m4. If a target needs .308 I want some barrel length.

I'd rather have a lighter more maneuverable gun. The bullet might take an extra 0.08 seconds to get there from a 16" barrel rather than a 24" barrel, but good luck getting hits that far on moving targets anyway.

Shooting 308 out of a 16.5 inch barrel is foolish. Other rounds are better suited for short barrels.

Attached: 308-optimum-barrel-length-chart.jpg (441x287, 37K)

oh no, not a 10% difference in speed for saving a fucking foot in barrel/handguard length

The UK has been using the same rifle with a 1:11.25-inch twist 16 inch barrel for 10+ years as a DMR (L129A1).
It's proven to be effective out to 800m with M80 ball.

>because choosing a cartridge that is more efficient in a short barrel (specifically fucking designed for it at that) and reaping all the benefits of that is beyond brainlets that live life one meme after another.

Militaries do it because it is a machine gum round. Shared ammo. What is your excuse.

Did you read the thread topic?
The rifles are overrun from a South American military contract

This is meaningless pedantry, if you're shooting .308 you're already compromising and implicitly not concerned about maximum efficiency. People who genuinely care about long range performance use .338 and .300 magnum rounds anyway.

>is talking about military contract overruns
>thinks the military contract overruns produced by a company that sells dmrs to the US, UK, and others are a "meme"
>he thinks LMT makes guns that are "pointless" and sells these pointless meme guns on military contracts
what the fuck are you on about with more efficient? we're not running a fucking motor here, it's a gun. i don't need to max my stats to use it.

*gun* lol.

Yes, it's $300 off compared to the standard version plus the story behind it will means it'll be a collectible in a few years time no doubt.

Well, we're back to the right tool again. It may be only woodsmaster but 30-06 covered. BAR in .338 win mag. etc.

Attached: 1215171806a~4.jpg (1428x3496, 819K)

It's not just about range. Something like the 338 federal has far more energy and is more efficient in short barrels if as an example.
You are the kind of guy that carries four screw drivers and two nut drivers because you don't understand the complexity of a six way.

338-06 is probably the perfect worldwide round.

they are amazing rifles.

Ar-15
Nearly 8lb empty

Why would anyone buy this junk

one of the best manufacturers of ARs in the world is why. they are great guns. i have one in regular. black. love it.

>why not use this slightly heavier meme rounds that travels at the same speed because it's more "efficient"

>Contract over-runs from a South American agency

They fall for it every time!

>Leave /arg/ to stop temptation of buying LMT
>Check catalog
>This thread

Attached: AUTISTIC_SCREECHING.jpg (263x192, 6K)

>Leave /arg/
you have to go back
or else

Attached: 1548452482982.png (600x842, 127K)

>The rifles are overrun from a South American military contract
Every fuckin time!

YOU CAN'T MAKE ME

Attached: REEEEEEEE_bUTTON.gif (220x220, 49K)

Moar like cantina greena, amirite

Dude I’m buying. 1800 for an mws is a really good price.

Hot take -
.308 is pointless in barrels longer than 18" in a world where 6.5 creedmoor exists

Attached: Screenshot_2018-08-10-12-21-08-1.png (1440x834, 456K)

I just want the CQB upper. But then that involves getting their proprietary barrels etc, and once I go down that path I might as well get the full gun, and I already have 2 MARS-Ls as it is. I just can't do it right now.

Attached: NamHelper.jpg (314x314, 30K)

Fucking peasant

Attached: sadhelper.gif (600x502, 54K)

Heavy ass gun. Why?

DO IT FAGGOT.
BE LIKE ME!

Attached: GIT GUD.jpg (2160x1838, 1.19M)

You seem to really like little dicks

If I were to only buy one 308 ar10, would this be recommended?

probably because you like them in your butthole so much.

>would this be recommended?
yes, ESPECIALLY at this price

You are correct

i bought one

I can't justify the purchase right now, nor is it worth putting on credit. I am trying to get an LMT monolithic upper, but it's just gonna have to wait for right now.

Attached: SadMusicHelper.jpg (680x718, 46K)

338 federal as well.

You went full retard.

Attached: 1537110404478.png (520x512, 51K)

>slaps you with glove

Attached: s-l1000-3.jpg (616x900, 87K)

IT'S SUCH A GOOD DEAL!
SUCH A GOOD DEAL!
I paid 2500 for my LMT NZ16.

I know it is. But I'm just not in a position to take advantage of it.

Same here. Gotta pay off debt first but at $1800 for an LMT 308 in OD, fuck me.

meh, it is 10.5lb unloaded. Why do people still make so overweight oudated rifles?

You sure about that weight?

I could buy one of these tomorrow but I need to pay credit card debt, why must you do this to me, LMT faggots?

Attached: 1543970989837.jpg (750x1334, 226K)

wtf, is sniffing fiberglass insulation a thing?

Whats wrong with 14.5 556?

If you want an LMT but don't want to pay full price: SPM16 for $850

recoilgunworks.com/spm16-ar15-carbine-p-40510.html

People dont want an LMT for the rollmarks (generally, anyway), they want it for the monolithic upper and innovative barrel change.

>Paying $1800 for an AR with proprietary barrels

Uh, yeah. If you pay 1800 for an AR whose parts aren't proprietary, you overpaid anyway.

Maybe CZ will announce Bren 2 BR after this LMT sale? Maybe it’ll be priced $1500? Some silver lining for missing this, because you know a few months from now, these OD LMT are going to be listed on broker for 2.5x the price.

I want it for the rollmarks.

REEEEEEEEEEEEEEEEEEEE
THE 308S ARE SOLD OUT
IT WASNT EVEN 24HRS
ITS NOT FAIR
I NEEDED MY WAGEBUCKS TO ARRIVE
NOOOOOOOOOOOOOOOOO

Attached: 1549494786089.jpg (640x640, 53K)

This is quite possibly one of the most depressing images I've ever seen.
>t. been a NEET for a month, going to have to go back to being a wagie soon

Attached: HowardPyle.jpg (1024x791, 191K)

there are some artists among us

Attached: 1549497133936.png (1350x642, 650K)

>Not a single gun with wood furniture
Fucking disgusting

weighs more than an M-14

lel, who buys this crap

>100% markup ar because of name and silly piston

everything but the swiss gun is homosexual, 3rd gen plastishit, that will stop being relevant in 5 years when everybody goes back to gen 2 rifles after their meme plastishit breaks

>silly piston
?

Sir, step out of the Captcha, I'm gonna need to see your license for all of those memes

>being a jelly poor
Yikes!

>buying a gun on credit
Fucking kek why would you even consider that

Nobody, literally no fucking person actually uses "innovative quick barrel changes" NOBODY.

>tfw i know the real reason why they are selling these.
>tfw i cant talk about it due to nda

Do you really think all of the dipshits in /arg/ are well-off enough to afford their $5k gun/optics combos with cash? You realize there are tens of millions of Americans who live thousands of dollars in CC debt and see it like a mortgage or car payment.

I would if I SBRd it or wanted to put a longer barrel on it. Not everybody buys a gun then keeps it stock.

>tfw I know that you're a lying faggot and will talk about it willingly
Lying faggot you are, cunt.

think what you want. idc i was just post what i was feeling

>I would if...
Yeah, you dont. Neither does anyone else. If people want another barrel length they just buy another upper, otherwise you're constantly rezeroing optics

GUYS I HATE BEING POOR!!!!!!!!!!!!!!!!

Attached: 1531586938903.jpg (225x225, 9K)

Nobody cares about your feelings

not only cc cards a lot of these people are kids and buy stupid shit with student loans.

I use it

>rich fags mad i pointed out this 1599$ pos dosen't do anything different than a standard ar

Sure you do.

Except those are not green.

>nda
>on a anonymous Chinese checkers board
Tits or gtfo

I do, its a repeatable zero. Torque wrench is easy to use.

>being too dumb to value the reliability and finish of an lmt, not to mention the meme color that will make these worth $5k next month

Didnt know they made retards in a molarity this high