Handgun General - /hg/ #264

Sopranos edition

Pastebin:
pastebin.com/gs6mLNik (embed)

Guide:
scribd.com/document/382993265/gitgud-1-rev2-1

p.t

Attached: sopranos313.png (798x436, 284K)

Other urls found in this thread:

iammo.com/cz-2075bd-9mm-14-round-3-1-pistol-in-black-91754.html
gunbroker.com/item/801924093
twitter.com/NSFWRedditGif

3st

Attached: fil9co.jpg (2100x1400, 899K)

2rd

Attached: 20151226_111236.jpg (2048x1152, 869K)

goddammit burt now i have to go watch that

>hard copy of thumb wars

I see you are a man of exquisite taste.

how's the steyr treatin' ya?

Is there any real advantage to the Grip Force Adapter aside from preventing slide bite if you have monster hands?

Attached: gfa1.jpg (1024x768, 279K)

Burt is fat.

kinda straightens the hump. But you can just do it with one of the backstraps that comes with your glock, cut the bottom and you got the same thing. Extended pin would be a good addition.

No guns here. Is that a gen 1 glock?

That is a very poorly/cheaply made movie prop intended to be "close enough" to a Glock to fool the average 60iq moviegoer.

Gen 1-5 Glock 17 from left to right. Your'e welcome.

Attached: heroimg212x.jpg (1500x750, 195K)

You really don't

It's alright. I'm kind of disillusioned with it since finding out the compensator ruined it's reliability.

Attached: ell nine.jpg (1333x2000, 1.2M)

gen 2 still best gen

How much did you pay?

And I'd say the Elite LTT is the pinnacle but I'm biased and don't own the other elites as I've never found one that's not clapped out for a good price

There is a literal clause in the production division rules prohibiting SAO guns and plus, 2011's are not on the list

The 2011 mags are only good because they have a high capacity when tuned, people get 21+1 from Glock 20 mags with .40 cal conversions and basepads, the guns are more reliable, and the mags lock open. They will never have the trigger that 2011's do though, but people have still made GM with Glock 20 limited builds like that.

I actually wanted to go to a match tomorrow but the ones near me this weekend aren't actually that close (like 2 hrs) which is shitty because this is my first weekend day off in a while

Dawson does make Beretta sights (I've literally bought them before). Well at least the front sight, for rear sight, you need Wilson combat

Technically, the Steel I is probably the pinnicle of Competition Berettas, as it combines the Combat series trigger and safety with a weight heavier than the 92 Elite IIA and a durability befitting it's name.
Expensive and rare as fuck, sadly..

Attached: xM7XTdU.jpg (601x675, 153K)

If you are comfortable with SAO like the Star BM, then the obvious choices are the SIG P938 and Springfield Armory 911 9mm.
The Springfield Armory is new in 9mm and comes with night-sights OOTB, and is cheaper than the SIG, so as long as you're ok with buying from SA, it's worth looking at.
the CZ Suppressor Ready line is probably the best value, but the M9A3 is less likely to require a booster. Do you have a budget in mind?
a .22 pistol or a pocket pistol/revolver or a Shield or something
sure but you'd only have to train with a single grip angle and trigger. Not a huge advantage, but it's just an idea.
how has the sphinx been holding up for you? any regrets moving from your P-01 to the SDP?
look up the Beretta 92 Combat Combo. the slide and barrel are unique to the model as it contains a special barrel bushing that attaches to the muzzle and locks into a cut in the front of the slide. Allegheny Arms may be able to modify a 92 Brigadier to match, but you'd have to supply the bushing, sights, trigger parts, safety parts, and source the weighted rubber bumpers for the magazines. It's likely just easier to buy a combat combo used with the extra barrel set included for production class. (Combat, Short model)
>pic related
Langdon's the Patrician, you're just a pleb paying him tax in his district.

Attached: 92-combat-short.gif (470x315, 24K)

iammo.com/cz-2075bd-9mm-14-round-3-1-pistol-in-black-91754.html

ur welcome

Attached: lk.jpg (1563x1200, 442K)

>Still mad that he doesn't own the best Beretta 92

neat, they have safety versions for 549 too

>Mad I don't own a 92 Compact Custom Carry II, 92 Steel I, or 92 Elite IIA.
you're damn right I'm mad as hell.
why Beretta stopped making all the cool models a decade ago I don't understand. Now they are all aboard the glock-train, and they are not even in the first class car. Massive Bummer.

Are my best options for 10mm really just a 1911 or a glock?

> Dawson does make Beretta sights
Yes, just not for the PX4 for some reason. Market share, I assume.

> Langdon's the patrician
Motherfucker's selling more 92s and PX4's than Beretta's marketing, that's for sure. CZ needs to take a lesson and start throwing real money at Panonne as well.

I'm not even hating. If you start running pistol matches as well as either of those guys, I'd rather have you selling me pistols than some fucker who never shoots. Langdon at least has the juevos to tell Beretta that not including dovetail front sights after 3 decades is a bunch of horseshit.

>not wanting an actual glawk fawty

Sig p220

>homemade to make it untraceable
>single shot to eliminate shell casings
bravo chase

92A1 no question. The cost of the magazines included make up for the price differential alone. Sexier looks, softer recoil, and easily replaceable front sight are icing on the cake.
You actually might want to take a look at the G2C as it fit all that criteria to a T. It's not a hammer-fired pistol, but it will function like a DAO, essentially.
you're limited to the roster, so maybe a nice 1911 will make up for the mag cucking? maybe, maybe not.
that pistol looks so much better in black than FDE. I wish FN's OD green didn't look like snot, though...
even Taurus has some decent polymer guns and we'll see about the new Hi-point. It is somewhat of a golden age of handguns right now. Never been better!
>now for S&W to make a polymer framed "4th"-gen Automatic
if by classic you mean Swiss, then yes.
You can't just swap the spring or something to fix the problem? are there others who have had a similar problem with that compensator? Perhaps you have a lemon or something out of spec with the pistol or comp?
GP P40L?
CZ Clone in 10mm?
S&W 1006?
SA XDM 10mm?
SIG P220 10mm?
Glock's probably the most *cost effective* of all the options, but idk if it's the best across the board. what do you mean by best?
>Beretta
>Marketing
gOOd JokE MaTEy
>not including dovetail front sights after 3 decades
except Beretta included front dovetail sights before Langdon ever got involved with Beretta and the LTT project? the 90two in 2006 had a dovetail front sight and there may have been limited production models before that with the same feature. Yes it took like three decades from the advent of the original 92 to add the feature, but no thanks to Langdon personally.
Is he a great shooter? yes. is the LTT a meme gun marketed to his cult following cynically for personal gain on his part and Beretta's? absolutely.
That's capitalism baby!

Attached: 1550538963749.jpg (550x386, 32K)

So, one, I know it's poor safety to just rely on tactile trigger feedback for a hammer gun rather than looking down at the holster, and two, I know it's going to be gnarly as hell to pull off with a pre-cocked striker, but hear me out, because whiskey.

How would you wire up a "gadget" to a VP9 or PPQ? For the PPQ, the only thing I see that could move a part without fucking with the sear might be adjustable trigger bar guide. However, it would require an entirely new end cap, and I'm not sure how much torque you'd actually get since it's technically rotating down rather than sliding straight backwards.

Attached: hey-look-pinterest-wasnt-useless-for-once.jpg (1600x1074, 228K)

>That's capitalism baby!
Why no dove tail sight on the 92fs then? Why no 92fs or 92A1 with a D spring from the get go for the US market, where those rock hard Berdan primers are relegated to poor bastards stuck buying S&B? Their market research is shitty, bro. Just shitty.

Does anyone else shoot 9x25 Dillon?

Attached: 9x25 Dillon k.jpg (3162x2741, 1.7M)

>How much did you pay?
$900, which is probably too high for a first gun but it's supposedly had

unfathomably based

Just picked up an H&K USP tactical .45 with 5 mags for $750
Howd i do?

Attached: imagejpeg_0.jpg (1024x768, 402K)

Shield, Glock 43, PPS M2, are there any 9mm subcompacts that I'm forgetting?

Based hk poster

Attached: 20190302_231913.jpg (1393x1175, 1008K)

P365
Glock 26

Not a steal but it's probably a gun you'll never sell

Anyone have that 1911 buying guide infographic?

Attached: 1491267412955.jpg (643x580, 94K)

You did great. Did the rail adapter come with too? That's fucking awesome. Gun is used right? That's like $200 worth of magazines. You did fucking really good.

if by some retardo chance the gun is new, you did so good I'm going to hunt you down and use your internal organs to create a luck fortifying tonic.

Seconding this request

I doubt it could be done, the sear in both guns is too low in the frame for anything to come in from the back to block it. The VP9 at least has a sliding mechanism that actually could be blocked a la Gadget, but not the PPQ, the sear pivots down at the front, far away from access by way of the rear.

Quite good indeed, lucky boi!

Keltec PF9/P11, Springfield XDS, Kahr CM9, Sig P938, Beretta Nano, Taurus 709, Boberg/Bond XR9/Bullpup etc. Assuming you're not including double stacks.

While we wait, what are you looking for?

Attached: november keyboard.jpg (2500x1569, 1.56M)

Also, anybody got a line on a Q5 Match Steel Frame Pro in stock?

Attached: Walther-PPQ-M5-Steel-Frame-Pro.jpg (1200x900, 409K)

I don't have that exactly but I do got this old thing. Probably pretty out of date by now.

Attached: 1547019410233.jpg (2500x1626, 528K)

Went full rice and got a $35 Chinese comp. Unfortunately I need a lighter recoil spring now because I get ftfs or stovepipes every 5 or so rounds.

Attached: IMG_20190302_175659856.jpg (3024x3212, 2.6M)

not the pro just reg:

gunbroker.com/item/801924093

Definitely used, but yeah, rail adapter did come with as well.. Fuck me, right? Lol
Think im gonna take her with me to Dallas next time i have to deliver up there

Why dont you own more sigs Burt.

Why?

link to comp?

>The duty gun on $13.50hr

Attached: 20190303_092936.jpg (2560x1244, 344K)

Why are you carrying a handgun that costs more than a months pay?

Buy it and tell me if it's any better than a cz shadow ii

I'm waiting on the PPQ SF. My body is ready.

its Jow Forums approved

Attached: 20190219_182159.jpg (106x218, 8K)

>Was never into glocks
>Always thought they looked boring
>Recently started seeing pics of all these custom gucci'd up glocks
>They actually look pretty nice and I'm tempted to get one now

Was really planning on getting a revolver as my next handgun. Post custom glocks plz

Attached: lc662b7.jpg (960x960, 260K)

gay as fuck, like those faggot cars from those shitty fast furious movies

I don't know why but I expected an FNXt owner to have like, alienware or something.

What are some good Glock fiber optic sights? Looking for fast target acquisition during the day.

no its all built

Attached: 20181227_185323.jpg (2559x1244, 382K)

Ameriglo

This belongs to some guy here. I really like the hex pattern, reminds me of Deus Ex.

Attached: 1545250883093m.jpg (1024x643, 78K)

I regret buying my sig 220, and not getting this in battle grey.

What are the best places to sell used handguns online?

idk I bought mine at a gun shop for $999.25

Attached: 20190207_210440.jpg (634x1304, 179K)

I'm looking to buy my first handgun, I can't carry it yet so I'm not concerned about that, looking for something to compliment my 12gauge, decent capacity and semi auto, no big pricetags

Can anyone steer me in the right direction?

>CZ P09
>Beretta PX4 fullsize
>S&W M&P2.0
>Ruger American
>Sig P320
All of those should be under $500 new, some by quite a lot, and all are pretty good pistols.

If you want a custom Glock don't go buy a Zev or whatever pre made one otherwise you're going to get a shitty deal. Buy a basic Glock then customize it yourself. Even the stippling isn't that hard. The only thing you'd need to have someone else do is the optic milling if you don't like/want the MOS Glocks.

There are several but Dawson's are my favorite. TTI's are pretty good and have the advantage of being stainless but the fiber rod length isn't as big.

Ameriglos are okay for fiber optics. They're dirt cheap- like

Armslist, GB rapes you for 6%

Glock, M&P 2.0, CZ P09/07

disgusting rice glock poster be gone.
go buy more affliction and American fighter shits.

Attached: CsU0327UIAETcNU.jpg (1200x900, 339K)

Just opened up my replacement PPS rear sight that Walther sent me.

Attached: IMG-20190303-WA0002.jpg (2268x4032, 2.69M)

It was sent to replace this, which happened at the range last week.

Attached: 20190209_102013.jpg (4032x2268, 2.84M)

Solid...

well, RIP.
>last week
At least they have a fast turnaround time? Took me 5 months to get a replacement CZ front sight last time I needed to order one...

Oh yeah they had it at my door in like 2 days, just didn't open it until now.

Went ahead and emailed that 2nd pic to the CS rep.

The gun itself is doing great, about 600rd in with no issues yet. Really loving the red dot too, the brightness auto adjustment is awesome.

Let's see if they get it right the 3rd time...

no ancap or /arg/ faggotry.

That stippling is disgusting. Fuck you if you did it. Fuck anyone that does this.

Just bought this, how fucked am i?

Attached: 96234_R51_Smoke_right-(2).png (600x425, 213K)

just bought pic related after years of wanting one
why do all the retarded old boomers think you can only shoot birdshot out of one? I have the pdx1 now but I plan on stocking up on federal 000 buck for actual use.
>discord
oof and yikespilled

Attached: IMAG0698.jpg (2688x1520, 1.06M)

Pretty fucked. Why would you buy that will all the negative press that's all over the place? Just watch MAC's video and weep.

>watch MAC's video
nope

I saw a video of a nog getting a single shot in the stomach with one of those during a carjacking. He walked away, sat down on a curb and calmly made a phone call, then fell back and died. Looked like buckshot.

>Noguns still mass giving advice
>Doesn't own a single firearm, has no experience with them, and is regurgitating wiki articles and fuddlore
>Some poor user will take this advice because "A trip said..."

You should be fucking ashamed. This is why you were banned from the discord.

Up to you, you're the complete dumbass that bought an R51 without doing any research whatsoever. Modern Remington is shit, and they can't make a pistol worth a fuck. They can't even get their shotguns right these days.

i was hoping they fixed those issues...

i didn't buy shit, just commenting that mac is a faggot that can't be trusted his shit is paid for

I saw pictures of that, was there a vid?
It was birdshot and 45lc. He had been peppered with shot and he also had at least one big hole in him, the judge was dutch loaded in the pics I saw

He literally turns down company after company that tries to offer him free shit and T&E guns. This has been posted many times, you blind fudd.

You’re a fucking idiot

MAC is an obvious shill. The only reason it bothers me and so many others is because he tries to hide it.

Buy a tavor goyim

imagine being this naive

>he doesn't know how social media influencing works
you should check out that fyre festival doc on netflix

Couldn't you just put a drop of loctite in the hole to hold it? I mean I don't actually know if that would work but could it?

Which casino?

looks like it's good for disassembling public toilet stalls in an emergency

That's the only one I found too, too much for me, the Pro costs less than that.

Sounds about right, god damn comps are gay. Lighter springs are going to start changing other things about the gun.

They are expensive

I would have to also buy a Shadow 2 idk if that's likely

What you don't see with those gucci glocks is that they feel and shoot like a stock glock so there's no point. But if you want to make a glock neat looking do it yourself and save the +$2,000 retard tax on a name brand.

In addition to also check the pastebin in OP

Armslist for starters, and the for-sale classifieds in gun forums like ar15.com.

lol wow I always thought those were drops of paint. Superglue the only one back in? Or get another replacement I guess.

Me too, we're about to find out together.

Also why?

I could but the problem is that I would be trying to join the metal in the sight to whatever material the dot is made of. And I don't really know what coating is on the sight.

I'm gonna let then try again. It's not too big a deal since I use the red dot anyway, just aggravating. I don't want to be fucked when SHTF when the norks EMP us and I'm stuck in TEOTWAWKI with an offensive weapon platform with malfunctioning integrated optics, you know?

Superglue it back in and keep it in your spare parts drawer.

Superglue sticks to almost anything.

i fell for the spacegun meme, also it was cheap and metal and +P stamped on it

after the tavor debacle MAC has gotten a lot better about transparency and unbiased stuff, most of the shit about Tim being a shill is an old meme that people still circulate

Attached: australian_spaniel_running.gif (206x200, 742K)

Dealer cost on the Pro is around 1400 so I wouldn't expect it to be much less than 1500 until they're in the wild for a while

Attached: assault-rifle-screwdriver-bits.png (426x493, 306K)

Ooh you're not gonna like +P out of it I will tell you that right now, it's a snappy little shit.

That's what I'm looking for, a Pro for under $1,500 and I'll jump on it.

These damn things better not have been just one batch and done... I saw no press about limited production.