/arg/
AR thread
Bullyzone
Cancer containment
Aim small miss small edition
Old
/arg/
AR thread
Bullyzone
Cancer containment
Aim small miss small edition
Old
Other urls found in this thread:
amazon.com
circle10ak.com
twitter.com
Is this Gookfoot counseling Wuggy?
Am I in the gucci club yet or do I need a DBAL, 1k+ optic and a trip
Tax stamp first iirc.
>mro
dropped. not even going to talk about the rest of garbage.
Delay the dbal, get a $2k optic, and a couple stamps on that
No, about what?
That optic looks like the sewer pipe on mario brothers.
>No, about what?
About murdering A2
He's chinese.
Why get a rail with those picatinny segments if you're going to use none of it? Your optic and muzzle device are gay. Get a different sling and mags. Get BUIS.
This is a poverty build. Continuing from last thread what red dot sight do you recommend that isn't garbage and isn't $500+ I'm looking for a something simple.
Aimpoint pro
DBALs suck get a perst
that muzzle device is sick though
Your charging handle is more expensive than that optic my dude... If you absolutely can't shell out for so much as an Aimpoint PRO, getchu a Holosun
Aimpoint Pro dumb ass.
Kek fuggin saved
for the price this cant be beat. sand niggers in iraq use them
amazon.com
>You wasted all your money on garbage
that sucks
the cheapest thing you can do to improve that rifle is to buy a can of black spray paint and paint the barrel
Which aimpoint specifically?
THE PRO RETARD.
An aimpoint PRO or a used Comp M3
>Troy irons
>Magnifier
>1 pound muzzle device
>bendy bill rail
>Grandpa grip railscales
>no beamz
>Absolutely garbage meme bcg
>1x on a 16" for any reason other than popping poorfag armor (too dumb to use m855A1 anyway)
Stop you're gonna make me cry
The brake on your brake needs a brake
How do you know he doesn't have a flash hider under there
>did I just assume his muzzle device
Its possible
I got drunk and went on eBay. Got it to play around with while I wait for my suppressor to get approved. But now that strangers on the internet don't like it I'm having second thoughts
This guy gets it
Maybe the gulags will stop you from making that mistake again so quickly
Hi everyone, retard here. What the FUCK do I have to do to build a pistol lower? Can I just buy a lower receiver, throw an SB3 on it and an 11.5 upper on it and call it good or will the ATF shoot my dog if I do that
Make sure that your FFL marks the 4473 as Other when doing your transfer. If marked as Rifle you're fucked.
As long as the lower was not registered as a rifle you are fine. Dosen't mean the ATF won't shoot your dog anyway.
Thanks gents
Never post here again.
what are your individual opinions on the magpul addons for gi mags: the og pulls, ranger plates, and L plates?
I recently replaced all my pmags with okays and am noticing that they're a lot more slippery and don't have a flared baseplate to help pull them out
I'm used to grabbing mags by the bottom/exposed half of the mag entirely and ripping them out and have never tried trying to find a loop for my finger to hook into
I figure the og mag pulls at least have a slight protrusion from the mag body but it seems like over time i'd need to keep pushing them back down onto the mags
what do i do besides git gud
Awe what are you going to do about it?
Nothing. Do we not live in a society?
>I'm used to grabbing mags by the bottom/exposed half of the mag entirely and ripping them out
Dont do that wtf
100MPH tape and paracord
circle10ak.com
Stop listening to ARfags that think you need thousands of dollars to shoot.
>200 dollars is poorfag territory
>for a rifle that shoots a .22 round
>spend all that money and can't hit shit anyway
>Half giddy and half Burt
I honestly can't think of a worse rifle to have
Alright dipshit where do I start? First off, AK sights suck, I'm an ak fag and I fully admit that. Not as bad as sks sights but not much better. Second, that's a fucking surplus part, so it's been produced by the fuck ton and has way more supply than retail pic irons. Third, folding buis have more to them than a piece of machined steel with a small spring loaded slide. Fourth, $200 can get you a fine small red dot but they lack in fit, finish, and combat-proven ruggedness in comparison to a $400 Aimpoint PRO or sights going up. Fifth, just because a sight is expensive doesn't mean it's good, MROs have tinting issues and EOtechs have POI shifts from temperature differences. Sixth, just because someone spends money on a rifle they'll use to potentially protect their life doesn't mean they don't have money left over to buy ammo for shooting practice, and it certainly doesn't mean they expect their money to make up for skill. Price of rifle and price of training is not a zero sum game.
Quit making AKfags look bad.
>First off, AK sights suck
This one's too far gone.
so don't grab the magazine to pull it out of a pouch? ok
Spent all my money on high quality upper, barrel and BCG. Now I have to choose:
>Suppressor
Or
>Quality optic
Which would you pick? I can reach decent distances with iron sights and I really want a suppressor.
>ak sights suck
nigga you what?
On an AR? Optic for sure. Suppressors are nearly 100% just useful for bragging.
They're 100% dogshit terrible.
I admit I really want a suppressor as a range toy and for the more pleasant shooting. No range near me goes beyond 75 yards so I have a hard time using an optic. A suppressor is more useful in my situation.
>and for the more pleasant shooting.
Like uh, how?
Unless you go shooting alone at a spot in the woods, other people are going to be there. Shooting. It's not like you're gonna take your earpro off in that case.
Reduces pressure waves. Helps indoors or outdoors.
>Reduces pressure waves
Maybe it's because my first gun was an AK with a retarded brake on it, but ARs don't really have that bad. Unless it's a 10" thing with a retarded brake. In which case, get used to it pussy.
But it sounds like you just really want a suppressor and weren't really wanting an optic anyway. An optic will actually make shooting easier and better. It is the number one improvement you can make for effectiveness. A suppressor is good for saving your ears (which already covered isn't happening if you're anywhere shooting with other people) or masking your sound signature, which if you needed you wouldn't be asking.
Why would they shoot your dog? Are they anti man’s best friend?
I know there isn't much logic behind it. I have a 20" barrel so there isn't much gas pressure at the end. I'm just trying really hard to justify buying a suppressor because I've wanted one forever. I'll probably wind up getting the suppressor and the tax stamp and cheaping out a mid-tier optic. If I had the money I'd splurge on a great optic but there's nowhere here to shoot at the kind of ranges where it would matter.
Fuck it, just get one then. And buy a stolen ACOG for like half retail price on ebay.
Anyone know which version of the MR556 we're getting in the US now? A5? A3? A38?
Thinking about going full negro and painting up my Commando. Is this a bad Idea? If I do paint it, what color scheme?
absolute garbage
Don't, paint a shit. Finish on gun will never be quite the same again.
I think its time for my rifle to get a viper pst 1-6.
why does your receiver and part of the upper look like its made out of plastic?
I think it's time for you to shoot with what you got
Real talk bros. I want a Daniel Defense upper. It’s a lot of money for this poorfag. What’s the typical barre lifespan of something like that, assuming I’m not doing mag dumps into a dirt berm, or Lucas Botkin tier mag dumps at 7m?
We don't actually. We live in an economic zone full of completely interchangeable cogs ruled by billionaires, most of whom are Jewish and hate us.
That's something your grandkids will have to worry about
>he bought magazine connectors instead of a sling
you are literally the worst kind of person
So you can shoot another 200 rounds a year on the same, small, shitty, static square range with it? You are a stupid, fat faggot.
Considering that he kept asking which Aimpoint after being told the Pro 10 times, he's a moron kind of person.
*180 rounds
Accupower brightness a shit.
M193 or M855 from Federal for a 1/7 twist 16" barrel? I tend to lean towards M193 on account of accuracy issues I have had with M855.
>sandniggers in Iraq use them
Yeah cause that's the review you want; favored by a terrible fighting force.
Everyone leans towards 193 on account of accuracy issues with m855.
Get some 77gr BTHP
Howdy, faggots.
Post some 300 BLKSBR and their config, I need some inspiration.
>Get some 77gr BTHP
I already have 69gr BTHP for accuracy work. I just wanted some general purpose stuff.
Big brother soon.
M193 for a myriad of reasons, not the least of which is price.
Another just as good AR?
It's an etched reticle. QYB
This is the only (you) I'm giving you today. Don't spend it all in one place, faggot.
I expect it to be brighter
It's not a Cantina Green gun.
I lied, second (you). Do you not know how to google basic information on what you are buying? The accupower's long time, by far biggest downside is lack of daylight brightness.
BROWNELLS aLUMAHYDE cOYTE
Most people who buy trijicon tube scopes are just people who drank the acog coolaid and assume anything triji is amazing. Low information
nice ash clone
Do AR pistols need lighter buffers? I'm having ftf issues on my 14.5in pistol. Gas port is perfectly aligned, tried different mags, tried both wolf poly and wolf gold. Wolf poly won't grab the next round, wolf gold double feeds.
Sounds like a bolt issue
nice ash post
>14.5
surely carbine length gas?
whether it's a pistol or a rifle with that length barrel wouldn't make any difference. what buffer weight are you using currently? i wouldn't run anything less than a h2
nice ash response.
Mid length gas is good to 13.7"
mid-length gas system and using a POF buffer, sales description doesn't say the weight
It's still good value in an optic if you don't mind the brightness. It's a common problem with optics in the same price range. Don't know why anyone would buy an accupower over an accupoint though.
hmm. pretty sure it's just a standard carbine buffer and should be fine on a mid-length