AK General /akg/
You're Not You When You're Hungry Edition
>Thread #785
Old thread here
/akg/ AK General
Oliver Anderson
Other urls found in this thread:
pastebin.com
investopedia.com
twitter.com
John Wood
>AK Buyer's Guide
Jose Reyes
Thomas Watson
Mr. Snickers has access to all these rare gats but if he ever does a video it's maybe two minutes of trigger time and him waxing on about how awesome and controllable it is. I JUST WANT TO SEE ITS INSIDES.
Daniel Nguyen
He, a mere mortal like us, is reminded of the things we don't get to have
Carson Moore
the only problem i had with the can upper was it bending up easy but it sounds like you have good backing. All these fools complaing about it burning up forget its not like its rare make another one.
Angel Sullivan
How should I trick out my new vepr sporter?
Thomas Sanchez
>All these fools complaing about it burning up
It was just one "fool" and I was simply asking about it m8.
No need to get defensive.
WTC that polymer reverse dong. Also your hammer pin's missing.
James Watson
i was using the work fools as you would use the word "guys" but still not offended about it just point out you got 11 more cans in that pack who care if it burns the paint off. that was one of the build photos of that "one piece at a time" Frankenstein build.
Wyatt Williams
>I'm gonna make some many mediocre 3 minute videos about these
Christopher Morgan
I didn't think he, nor you, care if it burns off. I was just curious how many rounds it takes. Specifically bare can vs wood backed.
What's with the GB and FSB on that thing?
Gavin Foster
I'll post results next time I take it out. I know 3 consecutive mags got the original handguards sweating so I'll probably start with that.
Kevin Russell
It is a ras47 barrel assembly and it was nothing but aggravating to work with
Tyler Jenkins
Are we posting ugly fucking rifles today? Because my wasr definitely qualifies.
I bought this side folder to put in my aes-10b for reasons, but it doesnt fit so I put it on my wasr and put my pretty wood in the box to sit. At least it's a likeable ugly
Anthony Harris
>tfw suddenly getting lots of emails in Russian from Wish.com
Thanks Ivan
David Russell
>put my pretty wood in the box to sit
I assume by that you mean the full gold tiger stripe set, right.
Do you still have the SKS-D/M (I don't remember which you had)
>Also, put the plum back on the AES.
Joseph Torres
Only thing left from the tiger stripe is the mag and lower handguard. Stock and gas tube were refinished into my nice wood set
Yes, but it’s a regular Yugo that has shitty aftermarket mags
>no
You’ll get your plum fix soon tho
Hunter Lopez
>Yes, but it’s a regular Yugo that has shitty aftermarket mags
Well shit. Thought I had something for you.
Unless you actually have the plum ((10)) mags to go with your krank-off, I don't care m8.
You willing to come off the RPK plum, since you're not using it?
Matthew Cook
Damn you know me spooky well. I’m subscribed to their email list. Worst case I’ll buy a couple ((10)) waffles and send them out to get duracoated plum.
I’ve tossed the idea around of selling the set, idk what I’d ask for it and I’m still not 100% convinced I’m not going to use it yet
Carter Hernandez
>Damn you know me spooky well
Well it's been a few years m8. I'm surprised you don't know who I am.
It's as if I didn't fuck with you for a couple years to get plum on that $500 RPK.
>I’m subscribed to their email list
Whose? I hope not ((10)) AK, Because Chief Thunder was the only one who brought the real plum and OD ((10))s in, among other rarer mags.
>Worst case I’ll buy a couple ((10)) waffles and send them out to get duracoated plum
Get the real deal or just stick to the bake 40.
Cheaping out ends up looking like you cheaped out.
Bentley Howard
I know you've been tracking, and I know you're the plum RPK guy.
((10)) had some that they had duracoated or cerakoated plum. Looked nice enough for govt work, considering the plum krink furniture is all US made stuff anyways
Bakelite and plum looks good anyways. I want to cut down a 7.62 bake to 20 rounds for the short boi
Samuel Perez
Is it rpk shitposting hour?
Carson Ward
you tell me daddy
Jeremiah Phillips
I had a photo I really liked of my big wasr laying in my truck bed on my old phone, but it died tragically and I don't have the photo backed up somewhere.
Austin Cruz
>I know you've been tracking
I wouldn't say that, but you are kinda easy to pick out of the crowd.
>((10)) had some that they had duracoated or cerakoated plum. Looked nice enough for govt work
Even they said the coating was chipping away with each mag insertion. Just pony up and buy the real deal. Besides, it'll be something else you have that I don't.
>I want to cut down a 7.62 bake to 20 rounds for the short boi
pls don't. There were some 5 round plum ((10))s iirc.
Austin James
Aw, thanks. I think
Nigga those actual plum ((10))s are like $300, when you can find em. Its hard for me to consider spending more than $150 on a mag.
bakes arent even rare. I've got 5, one of them is extremely lackluster and boring, theyre easy to cut down and it looks super cool
Jaxon Foster
It is now.
Andrew Lee
>The nice fine wood
Luis Diaz
>Aw, thanks. I think
Don't make it weird, fag.
>Nigga those actual plum ((10))s are like $300, when you can find em. Its hard for me to consider spending more than $150 on a mag.
The last time I saw 40 round plum ((10))s they were like $180 30s were only slightly less, but it has been awhile since I went through the market.
Just fucking buy one, quit trying to justify it.
>bakes arent even rare. I've got 5, one of them is extremely lackluster and boring, theyre easy to cut down and it looks super cool
I've got like 16 and that's no reason to chop one up. But like some anonymous guy is going to talk you out of it, right?
At least try to get some specs from Bad Element so you don't trash what once was a perfectly good 30 rounder.
Oh and enjoy the SGM choke I recommended, as well as the new side folder acquisitions.
Jeremiah Kelly
HELP ME PLEASE I'M STUPID AND NO FURNITURE FITS
Justin Stewart
>was it carved?
Cooper Price
Anyone here have a TA-50?
Parker Morales
Why must SLR106 mags be so expensive? Killed my desire to buy that rifle.
Daniel Jones
Cant you just be happy with the mags that come with it? At least for a while?
Not like you are going to war.
Landon Bennett
William Peterson
What is the correct top cover for an 100 series? Want a normal top cover for the 104 inspired.
4 Piece is not a bad idea IMO.
>Micro dot on RS Regulate
Yeah that seems solid. Not too heavy, good mount, good function. I'm doing that for the PM md. 90
Caleb Wright
Buy beryl mags
You gotta shop around to find people who aren’t scalpers but it’s possible to get 5.56 mags. Kvar will prob have more 5.56 soon too
Camden Nelson
This nigga can’t seriously be this retarded
Anthony Evans
I want to replace the magpul stock I have currently. What would match the rest of the build?
Levi Flores
Shut the fuck up Feinstein I'm not using a 5 round mag
Owen Rogers
Black polymer akm stock
Tyler Miller
If you can't handle a situation with 5 shots then you shouldn't own guns.
Parker Cooper
>what are mass looting situations after natural disasters
You have never been through a hurricane
Asher Torres
This. Or when my area lost power a few years ago for two weeks and people were looting within the first three days.
Aiden Robinson
I like how you have to arrange it to show the sling tag because otherwise people would notice that the rifle is fucking hideous
Chase Wood
The first thing you should do is install a bullet guide so you can use normal magazines.
Nathaniel Hill
>tfw I live in the middle of 5 active volcanoes
>and a flood zone
>near a giant reservoir that will put my town under 5 feet of water in 20 mins if it bursts
>in a logging area not far from Oso, WA, which had a massive landslide a couple years ago due to the way the mountain was logged
Just bake me in a fucking pie already
Brandon Hughes
Thats what worries me. People are just fuckin itching for civil unrest and any little hiccup in society in becoming enough to trigger it.
Hudson Baker
What worries ME are the people who ARENT itching for it, because they're the least prepared and most irrational.
Bentley Harris
#civilwarnow
Dominic Edwards
After riding through double digit hurricanes it's as
said. It is always the unprepared who start the shit. I lived at ground zero for Francis, and Jean and the area got knocked on its ass hard. Almost all of the relief supplies went to the alphabet streets in section 8 housing so they wouldn't loot everything else.
Hunter Richardson
100s are just 74m, there's a few variations of top covers but they are date specific not model
Brandon Baker
RPK posters unite
Carson White
Trying to do an RPK build with this Definitive Arms Bepis, but it still kind of looks like an abortion. I’ll probably replace the Fagpul stock with an LMT DMR stock since it’s closer to the clubfoot look. I don’t really care for the birdcage flash hider either, but I guess it’s acceptable until I get a silencer.
Joshua Evans
>Old FCG holes are covered with non-functional rivets instead of welded shut
Gonna be a yikes from me m8.
Dylan Johnson
>abortion
That's putting it lightly. Got some glass for it?
Andrew Wood
>literally retarded
Hunter Cox
Nah I’m waiting for the Primary Arms ACSS Raptors to come back in stock. I have a Zenit B-13 and American Defense mount for it already. Looking forward to finishing the Vepr 223 up so I can tactifag the Vepr 12.
Julian Myers
I'm talking about the Saiga, dummy.
Jayden Smith
You can file the sides of the stock to fit in the receiver, I actually picked up a wasr that had one that was for the rpk but they’re pretty much the same thing. Some variation in the receiver block portion, so some will fit an rpk and some won’t; filing to fit the rpk won’t preclude use in a 1mm receiver later if you wanna swap it back.
Isaiah Young
Checking in
Cameron Green
Are letter streets a sign of poverty of something? I only know of one place that has them and it's a pretty average neighborhood
Jackson Miller
Just sell all that shit along with the DAbortion and build a good AK
Dylan Hughes
I guess it would depend on where you live. East coast of Florida letter streets are often fairly poor. 25th street where I use to live turned into MLK when going through them.
Nolan Butler
Yeah nah I’m not selling my Saigas and Veprs for some Romyshit or fly-by-night kit build.
Caleb Martinez
what think about izhmash saiga ak74’s? there’s one with plum furniture for 800$ and i’m thinking about picking it up
Jeremiah Fisher
Wouldnt be surprised if Larry has shot those tbhfam
Camden Turner
Buy. Sweaty Ben was selling Saiga 5.45s without the front end conversion for $1k last November, and they were gone in about two months.
Blake Garcia
I've been looking into them and it seems like they're only secured with a loctited screw. Is that secure enough or is there a better way like modifying the mags so the rounds tip up on their own?
Ryan Morales
It should be secure enough, since that’s what pretty much every gunsmith who professionally converts the rifles does. There might be some way to modify the mags with different followers, but that seems a little counter-intuitive to me.
Alexander Perry
>not building your own kits
Lmao you dumdum
You should keep the 12g and just buy 2-3 nice kits and recreator receivers
Carson Hill
... Why tf would I do that when I already own five Russian AKs; three of them made in the factory where Kalashnikov worked while he was still alive? I feel sorry for you zoomers who missed the boat on the real deal, and can only afford knock-offs or frankenguns with shit-tier US-made barrels. My next rifle will be a 5.45 Vepr-FM.
Jackson Perez
>why would i buy real russian kits and build them with foreign chf cl barrels when i could buy cucked imports
Oh shit nigga wyd
Jaxson Hill
>muh 40-year-old shot to shit Russian parts on a US receiver with a Polish barrel is just as good as your 2012 Izhmash Saiga!
If your AK’s receiver isn’t stamped with “made in Russia,” it’s not real. Sorry zoomie.
Justin Watson
>cucked imports
The poorfag cope is real. Atlantic Firearms is —> way.
Anthony Gray
>/akg/fags shitting up their own thread AGAIN
>Act like they aren't the same breed of retard as /arg/
>Meanwhile
Soon all your AKs will be obsolete.
Oliver Barnes
I can do with Made In Bulgaria :^
>saiga sporter
>vepr fm
>not cucked imports
L m a o
Austin Gonzalez
Why won’t my saiga 410 (SGL41) occasionally not extract?
>perhaps 10% of the time it won’t extract
>it fully cycles and picks up a new shell
>stovepipes the new shell into the back of the shotshell
It seems like the extractor just jumps off the rim. I’m shooting 3 inch shells so I don’t think it’s weak shells especially since it’s fully cycling and picking up a new round.
Christian Evans
Made In Russia quality
Jack Brooks
You do realize parts kits are even more cuckoldy, don’t you? They are they result of real machine guns getting torched and stripped of their small parts to sell overseas to poorfag Americans who can’t afford factory rifles. You can’t even get the real barrels anymore because Obama decided to cuck kitfags on that too.
Gabriel Russell
>guys I swear James river and the new Century guns are top tier!
Noah Turner
No it was bush who cucked kits. And kits aren’t so bad because you can get exotic shit that you can’t get brought in any other way. Has nothing to do with money.
>t. Partskit fag who has over 20 kit guns with one costing over $5k
Ethan Torres
I’d rather get a demilled russian deact and rebuild it here than buy a saiga sporter
At least with one I get a good gun
Jaxson Garcia
post $5000 kit
Ryan Anderson
ITs not a kit now. It’s built. It’s a type 2 fixed stock.
>can’t post now, driving to the gym
Nathan Diaz
>toyota
Thomas Taylor
Japs make the best vehicles
Matthew Cruz
Does the Krebs VEPR forend move forward when you shoot it using the bipod? Mine backs off towards the muzzle whenever I do, but its in 7.62x39.
Julian Gutierrez
Keep telling yourself that zoomie
Asher Thomas
I haven’t had any problems like that, but you probably just need to locktite it.
Charles Hill
>the virgin saiga sporter vs the chad 100 series kit
Kevin Brown
bro is that an sw20??
Kevin Bailey
What muzzle device? I dig the look.
Caleb Scott
100 series kit? Where?
Carson Hall
You can get slavs to demill 100 series deacts and blank firing guns from ru and send them to you
Samuel Ward
+1 on the plain black stock, friend.
Juan Gutierrez
Do I have to learn Russian?
Xavier Cox
But you can easily source new 100-series parts to convert your Saiga that already has a Russian receiver and Russian CHF barrel.
Asher Bennett
They learn English because America is their only market
Logan Powell
Where do I find these blyats