/akg/ AK General

You're probably right. I just figured this was a Paki soldier because he's posing in front of one of an Indian jet and they purportedly shot one or two down, but he's probably Indian and standing in front of the one that crashed in Kashmir

i unironically want an insas. itd be a neat collectors piece

Isnt the furniture bakelite? I'm fairly sure it is and it wouldnt surprise me seeing as India and China still produce it en masse

No, just shit tier plastic

You can probably dye the regular clear pufgun mags with rit dye or get India ink and soak it

Whats is the size of the original pap m92 grip screw. It's so hard to get off with what I have around me.

please help.

Okay, what next?

Attached: 20190311_140814.jpg (4032x1960, 3.27M)

Attached: 20190311_154248.jpg (4032x1960, 2.5M)

big gay, why you fags painting Romanian rifles? They look mean parked with shitty surplus wood

Because Romy park is incredibly rough and fragile, meaning that it rubs off with very little friction and takes paint extremely well.

Literally the only shitty thing about Romy rifles is the terrible gray-green park they """finish""" them with. It looks better if you let it drink up a couple gallons of oil but it also comes off from VERY little wear.

PLS HALP

homebuild counterbalanced action

You aren't going to find one at your local hardware store. What's the problem with the current one?

Literally nobody understands what you're fucking asking dude.

Yugos use the same length and thread bolt for their AKs as everybody else.

Do you not own a flat head screwdriver??

discord.gg/yqEASrx

What is a more durable finish? Alumahyde or similar epoxy over raw blasted barreled receiver or alumahyde/epoxy over blasted then blued barreled receiver?

What paint are you using? I need a finish for the 104 inspired that will *smacks lips
hold up

Attached: DSC03670.jpg (3983x2448, 3.26M)

What's up, need your gun to look pretty while you shoot at your friends?

You've been ignoring my advice for months why would I help you now?

Attached: 200_bother.gif (279x350, 2.55M)

lol nothing will make that gun pretty my friend.

Attached: LOL.png (958x974, 1.11M)

Yeah, but they're too small and the screw is so fucking tight.
I'm trying to take the original screw out so I can attach a brace and was wondering what size flat head I'd need since the ones I have is too small.

>he doesn't like how a worn rifle looks
It's shit like this that reaffirms your hopelessness

What the fuck just go and buy a bigger screwdriver holy shit how are you that incompetent?

might start selling off my mags soon

Attached: IMG_5837.jpg (992x1126, 1.32M)

ok

20 bucks

Attached: Forever incomplete.jpg (3831x2158, 3.91M)

Sell me your 7.62 bake mags, if you have any. I'm tired of being scalped.

almost

no 7.62, all 5.45.
my flecks will hurt the most :(

Attached: MVIMG_20180124_114551.jpg (1613x1210, 1.07M)

>fucking meme caliber instead of an actual caliber
That aside, those are some damn nice looking mags.

21

wrong

Attached: hmm.jpg (772x1190, 123K)

>5.45
>not the biggest maymay on the planet

>are you implying bakelite isnt

>Selling your AK-74 kit for a M9

kys

Honestly this

Attached: A new AK.jpg (4032x2103, 3.82M)

Why did nobody mention that the Krebs safety has a different wear pattern

I will buy that mag right now. As long as you're not going to jew people for them.

soon

Attached: IMG_3352001.jpg (1536x2048, 755K)

i will purchase them fugg

Oh baby I'm so pumped. Finally got my receiver to the shop. Tomorrow I'm dropping off the parts and hopefully by the weekend new ak will be done. My first kit built and hopefully not last. I'll take lots of pics for y'all

Shut up

Shut up

sell fleck izhmash TO ME

>As long as you're not going to jew people for them.

you mean like that one dude selling a "brown" tula mag for $200 on akfiles?

Attached: GGYT5568.jpg (1229x1229, 2.03M)

Shot my AK for the first time today

Attached: IMG_20190311_180742_673.jpg (3120x3120, 2.22M)

noice dude. isn't it fun?

Yeah it was great, 7.62 is nice and cheap and super fun. Sights were off though i'll have to adjust them.

welcome to the club. get yourself a $10 ak front post tool or get the AKFST one if you want a nicer one

Diff user but the i highly recommend the magnamatic tool, it was an autistic purchase but I fuckin love it. Thanks to helping another user here I also found out it can be used to adjust my Enfield front sight
If you do, get the one that can fit AIMR blocks because the normal one cannot

UPDATE

Attached: 20190311_194144.jpg (4032x1960, 2.29M)

nicer than Wuggy's/10

Quick question. Wanting to get into the 74 game for about 1k. I'm thinking waffen werks, jra or one of the antlantic firearms Tantal builds

You made a big mistake and you know it

Tantal but not built by Century

My WBP Lynx + meme mag

Attached: 20190311_171951.jpg (2880x2160, 1.55M)

post a better pic

Mag looks great but wtf u doin wit that brake and brace

>Krink booster
Hope you like your AKs overgassed as fuck.

The brake is the one sold by WBP specifically for their pistols. Its what they have on their Minijacks. Should I just throw on a slant brake, you think? I agree about the brace tho. Gonna buy a KGB Stinger to replace it once I get my first paycheck at this new job.

That picture is specifically to show off the shiny new paint, and I think it does a pretty good job of that.

When you get a chance can you inspect the interior of that muzzle device? Is it truly a booster?

Needs better brace option.

What paint did you use?

I don't mind the look of wear, but I also want durable finishes from a practical standpoint.

Attached: DSC03650.jpg (3054x2153, 3.88M)

PK-A Vene finally got. Big and hefty and Cold War retro sexy.

Attached: 70159BFD-70B3-457B-AFDB-17D65155E857.jpg (4032x3024, 1.97M)

>KGB Stinger
Hell yeah welcome to the master race.

Just be ready because the existence of the Stinger47 sure rustles jimmies round here

>bracefags

Attached: this nigga retarded.png (1905x1419, 3.71M)

>he actually has to ask uncle sam for permission to move HIS property over state lines

Attached: Kanna cuck.jpg (374x539, 49K)

Trip on.

Post your stepdad's guns catfucker.

>he's too beta to email a copy paste 5320.20 every year

Don't have any of em

Attached: get a load of this.jpg (563x1000, 392K)

So why a Lynx over a Draco? Not saying they're bad or anything, just curious

The dracos i finger fucked at my LGS had really sticky bolts that were a pain in the ass to rack, so I just chanced it with the Lynx. After Robski's recent tests with the Fox it looks like I made a decent choice. I also really liked the wood that comes with the Lynx and the eagle engraving on the side. I definitely like it and it shoots great. Really delicate paintjob on it which I dont mind since I like the look of the wear, but the sprayjob on the dust cover was kinda poorly done on one spot though.

Isn't the Lynx a commercial repro of the Draco tho, while the Draco is a semiauto variant of an actual Romanian military rifle with a different rear trunnion?

Speaking of dracos, anybody cut their hood into an open ear sight? I think I want to do it
>also does anybody have advice for fitting bake handguards

Attached: 20181219_050200.jpg (1440x2179, 2.69M)

My big boy 30-06 AK. I set the gas settings to full just to piss off the local brass jew.

Attached: 20190306_164842.jpg (1495x3452, 1.96M)

ayyy

Attached: IMG_5370.jpg (1632x1224, 968K)

Dubs names her. Trips overwrites and then is final.
Phoneposting btw

Attached: IMG_2371.jpg (600x800, 160K)

Bob

Ar15

Kursk

Fug

Twinky Boihole

WasteOfMoney

Winrar

Henrold

jew goblin

Nigger stick

I have that pistol grip too, haven’t installed it yet though. I’d love to try this Vene on a the Valmet M71. Better gun in every way than my SAR-1, except for the shit sights, so that might be the ticket.

Can confirm, this is the exact setup I have on my WASR. Also nice dubs

This is what you get

Eugene Stoner

Perfect. Thank you