Ar-15 help

Hello yall, I've had the same problem with my Smith and Wesson M&P 15.Last 2 times when firing the first magazine of the day the 3rd round doesn't fire and the bolt is stuck almost all the way closed and needs to be mortared to unjam. After that the gun shoots fine This has happened a total of 3 times with the last 2 times being today and last week. Just the 3rd round of the FIRST magazine being shot. Below will be pictures of the bullet and my bolt. Yes I know it's dirty I just got home from shooting.

Attached: 20190426_104753.jpg (3264x2448, 1.82M)

Attached: 20190426_104805.jpg (3264x2448, 1.85M)

Rule 1 of feeding issues: is it the magazine? Are you're mags numbered with a paint pen? Is the 3rd round FTF happening on a specific magazine?

Everything was nice and lubed each time this has happened. I would like to believe its the ammo or magazine and not the gun.Any help will be much appreciated

Attached: 20190426_104905.jpg (3264x2448, 1.92M)

What brand mags? Are you sure its actually 30 in there? If you download to 28 does the first round jam?

Attached: 20190426_104759.jpg (3264x2448, 1.9M)

This. Did it happen with more than one mag?

I believe I know which one it is but would have to shoot again to really tell. It bends the neck of the casing and leaves the same indention each time.

Pmags seems to be just the one magazine

Im not at the range anymore so I can't try anything right now, but all my mags are around 28 or 27 rds. After the 3rd round on the first magazine locks up the bolt I mortar rifle and then I can shoot all day no problem. Honestly can't say If during that time I reload the same mag that gave me the problem before as I bring a few. Hopefully it is the magazine because this happening doesn't inspire confidence

Clean the little area between the feedramps and the chamber, that little pocket where the star shaped part of the bolt locks into. Clean your chamber really well too.

Your overloading it to 31 which causes issues

I didn't think that that was possible

it is on pmags

Pmags have space for 30 1/2 to 31 rounds. This is to make it easy to insert on a closed bolt. If you are forcing the 31st round in the mag wont seat on a closed bolt. If you load it on an open bolt some type of failure to feed or eject in the next few rounds is common.
Im guessing your not counting and just shoving bullets in till it feels full.

>yall
stop.
Youre writing, not speaking, do it right.

Fuck off fag

attempt english. nigger.

That may be the problem. Would this damage the mag to were its trash now?

Attempt English, nigger.

Should be fine if you use it how its supposed to be used. Things called a 30 rounder for a reason. Dont have a mag on me cant check but theres a specific side the bullet should be on when fully loaded. You can use that as an indicator.

Damn OP, you bought soggy bullets. Id try to see if the vendor will take them back. You can try some Enzyte on them to try and stiffen them up

One is American Eagle 556x45 and the other is American Eagle 223

Yeah, certified soggy manufacturer. Best write them a letter. Sorry you got limp ammunition

Damn. I usually get soggy 7.62x39, I just assumed that it’s surplus from some war.
How do I make sure I don’t get soggy ammo?

Check the cillica packets in the ammo box, or if they dont have them you can try putting it in your freezer. Limp ammo will droop when it gets cold, and shrivel up. I usually cardy some ice on me when ai buy ammo for this reason

damn phoneposting struck again

>youre

fuck off yank

What the hell do you mean by soggy? What ammo do you recommend for stockpiling/plinking.

He means you didn't eat your ammo fast enough and the milk made them all soft and gross, bro.

soggy as in wet, limp, noodle-like. I recommend any manufacturer that includes Enzyte / certification with all ammo to combat sogginess

>you're
Shut up faggot

>use a common conjunction that shows no accent and needs only the apostraphie to be proper while maintaining a casual writing style that can be quickly typed by phone
>as bad as making words up by nigger tier combining them or for the sake of showing your dialect while writing
I dont care how you speak but keep your accent out of your writing
except Im not.

this retarded.

Yeah check the mags.
Mark them, and do some experiments.
It won't take much ammo to figure out which one it is.

Y'all got a problem with reejuunal accents, boy?

You'll Cowards Don't Even Smoke Crack

Attached: file.png (600x600, 919K)

I dunno cheait..

>t. illiterate
writing is more than you believe it to be

Right side

das rite we wuz litorit and shiet

your cartridge looks like it can't get it up

Reload it with some viagra

nigga your ammo needs some viagra lmao

Made me chuckle

Kek