/arg/
AR thread
Bullyzone
Cancer containment
Things that used to be hot edition
Old
/arg/
AR thread
Bullyzone
Cancer containment
Things that used to be hot edition
Old
based PSA
Am I gay for color filling my lower
ITT NFA Larpers that never leave their state
No, but the selector switch markings are
>Am I gay for color filling my lower
Only if it comes off the next time you clean it.
If it looks stupid but it works, then it's not stupid
i bet thats what ur mom said to your dad when you were born lmao
I'm baaaaack
>i bet thats what ur mom said to your dad when you were born lmao
That'll do pig. That'll do.
I hate you and everything that you stand for.
Nice rifle
>implying I had a say
meh I can just use some hoppes 9 and some elbow grease if I ever want it off
Meh, you could've gotten a different lower. Also move your sight back a tad bit, it's rustling my jimmies please
What's the next evolution of AR's? Have we reached the peak?
Probably materials that are lighter and stronger than what we have as it is.
Maybe powered rails that share a common battery.
b-but when it's all the way back it's too close to the charging handle and makes it hard to get a quick grip on it
hello frens
Is GWACS ever coming back?
Who cares?
Whoms't?
I've never welded before in my life, what are the odds I fuck up pinning my J-Comp with a harbor freight welder and a few videos on how to do it? I'm mechanically inclined and pick these things up quickly. It's already pre drilled.
buying another lower, and I want to supress it. should I go 300blk or 9/45 pistol? I like the idea of 45 as all ammo is subsonic, but its 45aarp and Im having trouble finding drop in kits to a standard lower
I welded my 14.5" on my first try ever welding, went okay
any serious differences between a 14.5 and 16inch barrel?
150fps and 1.5"
And a triggered WUGWUSS if he sees a 16"
I think I'm gonna get an acog and rmr for my ar, but not sure I feel like spending the money.
Buy my ACOG then. It's not an Ash clone though, no black mould spores.
Are the Primary Arms 1-6x optics "good"? I'm setting up my AR for 2-gun and am debating if I should get one of these scopes or if I would be just fine with my MD-ADS I already have.
Can you guys take this tard back? He shitposts akg now.
No returns no refunds
Can you guys take the cat fucker aka orangecat back?
Trip on, trAsh
Trip on, cat fucker
it'd be nice if both of you would kys
Trip on, Max :^
if i was max, i'd kms for the betterment of mankind
time for ar
What do you guys feed your 5.56 SBRs? I know 55gr stuff suffers pretty badly from the short barrel so I'm looking for something 69-77 range. Is the magtech 77gr OTM any good? What about the IMI 77gr razorcore?
magtech 77gr otm is good stuff. never tried the razorcore stuff, but i've mixed reviews.
I like it
Thanks man! I'll give the Magtech stuff a try. I hope my gun likes it, it's significantly cheaper than other options.
Transparent lowers and uppers
>1st, 5th, and 7th
Jesus christ you people have shit taste
you're trying too hard, user
Why are normalfags allowed to build AR's? The Second Ammendment was a mistake.
Can someone post the full res of 3rd place?
i agree. in order to own an AR you should need to have served in the military.
No, 14.5 will get you just about anywhere the 5.56 round can.
Anybody know if this mk262 clone batch is viable? I've never heard of RL17 being used in a 5.56 but Quickload seems to like it.
Most people recommend rl 15 for that, a guy has a good youtube series on cloning mk262 and goes through a lot of diffrent powders, it johnnys reloading bench
>form 20 efile isn't a thing
Tig welder? Not very if you run a few practice beads first, just be sure to get in and out of there quickly, don't want to overheat something
its sub moa good stuff
make the weld pretty hot because if not it will splatter and leave a big ball on top of the pin. you want it to flow out nicely over the pin. you wont overheat the barrel pinning it... its literally half a second of welding. practice on a shitty flash hider if u can
welding a bead is nothing like a tac weld. no need to practice "running a bead"
Great block 1, fambino crime family.
>2020-1
>using alliant powders
>not using extreme powders
The real question is which one is heavier. I'd suspect LMT but LWRC are supposedly mighty THICC.
I think the LMT is heavier even as configured ...that monolithic upper just weighs a ton
>Great block 1
Is there really anything better? Is there really any point in anything else? How does the Block 1 continue to transcend hype memes and trends? How does it keep getting away with it?
What mount is that on the Aimpoint?
Large Mass Titanic Mfg.
Block 1 is old, but it transcends fads and gimmicks. I wouldn't call it the best but I wouldn't take away anything from it either.
It's a new revision of Aimpoint's own QD mount. They've gone to a locking lever instead of that knob which used to punch holes in your chest.
It's Aimpoint's optional QD mount and spacer that they offer for the micros.
>How does it keep getting away with it?
Simple: it works
This ish worth 1400-1500?
So does every other trend that comes and goes.
No, not secondhand at least.
Hell no
No. Maybe if it was brand new and complete LMT lower and BCM cfh barrel. Not used though.
What kind of upper can I make out of 14.5" barrel and 15" mcmr?
Which sperg bumped me off #8 for that cancer
You can make one upper. Get a 13" mcmr for your 14.5" barrel and throw the 15" mcmr in the trash.
That cancer has a third pin tho
Anyone used a larue risr?
O shid
>throw the 15" mcmr in the trash.
Donate it to a homeless shelter instead
It's A2's dad's lower
If they are not meant to be together, I would rather throw that barrel and get a 16 in memetic caliber like crendel or 300.
>still needs to not dip electrode
>still needs to not put too much heat into it
What kind of dumb nigger would recommend not taking some time to practice welding on some scrap before atempting to weld something like a barrel
All that sodium. Post your three pin lower.
SHARK why did you go thiccboi on your mcmr upper?
>16"
>.300
no
Trip on A2
No salt, just stating a fact
>long .300blk
Thats literally counter to the purpose of the cartridge
What rail on 2 and 7
You want that skinny boi barrel whip inside a thin rail?
Not A2. Waiting for you to post your 3 pin lower though.
Trip on FA
CASV
Post your full auto lower user
Gonna post deez full auto nuts
Thx bois. It was a trade offer but ya.
I asked SHARK not user
But why not? AKs live with similar chamber and barrels, and with a can, wouldn't that be quiet?