Panic buy thread:what’s should we be buying

Ammo
80% lowers
Arm Braces
Binary triggers

>what for most important buys?
Satanic boomer buys high and triples the price. Why ask us what you are going to price gouge next?

Reloading supplies and magazines in addition to what has already been mentioned. Remember that the panic buys only happen because retards like you panic.

Hello, Satan-kun. The short answer would be literally ANYTHING AR related. Any AR parts, magazines (20 rounders or greater), binary/echo triggers, lower receivers and perhaps some 80% lower receivers as well. Other honorable mentions would include literally anything striker-fired 9mm related, especially Glock parts and magazines. Do not even bother buying anything that relates to manually operated firearms over the next year or two (Lever actions, bolt actions, pump actions, etc). You'll just be wasting money when you could be putting it to the things previously mentioned. It would also be smart to stock up on some common ammo such as .223/5.56 NATO, 7.62x39mm, 7.62 NATO, 300 Blackout, 9mm, .45 ACP. Don't bother with 12 gauge for now as that will literally never go away.

Attached: :k: Never Ending Ride.jpg (459x549, 77K)

I’m not a boomer I’m a zoomer who’s scared of suppressors and mags going the bump stock route. It’s already fucked for mags here in Colorado

Attached: 5B175EAD-C952-4149-9D65-D30B8DD551BE.gif (220x165, 273K)

I’m already kicking myself for not getting a bumpstock last year. I don’t plan on price gouging anyone, I just want to know where I should focus my gun funds

>I just want to know where I should focus my gun funds
See

I just bought 500 rounds of m193. Im going to long term store.
I also have 4 unopened 30 round mags.
Shit, I have 2 spare AR barrels.
I still dont feel like Im where I want to be.
With 2 complete ARs. And a third missing a handguard. Im good on triggers.
Im conflicted though.
Build a 308 for long range or pistol 300blk out.

P mag 30 rounders
Glock mags
Bx25 mags for 10/22

The Democrats are coming for all of these listed.

>308 or 300blk pistol
Go for the DMR/Battle Rifle build, hands down.

Attached: Chad Battle Rifles.png (500x352, 57K)

>It will be 4 long years of ass raping.
This. If the Democrats win in 2020 I'd expect Sandy Vagina sort of runs of guns/ammo/mags for 4-8 years. Ammo is incredibly cheap right now and mags are abundant; use this chance to buy cheap and stack deep. Take it from me, you don't want to be the guy stuck with only a few mags and a small stock of ammo when prices do pic related.

Attached: fKmU08T.jpg (636x383, 41K)

binary triggers are already illegal in florida and the legislation is going to get copy/pasted to your gay state when bloomberg gets around to incorporating the relevant PAC

>Ammo is incredibly cheap right now
Bro, prior to Obama taking office, you could get 50 round boxes of 115gr 9mm for around $5.50 at Walmart and 1000 rounds of S&B 55gr 5.56 for $180. China and India making hits on copper hasn't helped, but ammo never really recovered.

I am not ready to see fucking fist fights in a Cabelas over the last PSA rifle or see grown ass men shoving someone's kid on the ground to be first to load up a cart with the store's entire stock of .22lr again.

Still way cheaper than It's been for the last 7 or so years. During the SH scare I had wet dreams about sub 45cpr 5.56; fuck, I had dreams about just FINDING some 22lr on store shelves. During that time frame I pretty much fell back on shotguns and sporting clays to get my shooting fix because most common calibers besides 12/20ga were unobtanium or horrendously overpriced. All I'm saying is don't be me circa 2012, take advantages of decent prices.

rice, beans, sealed containers, shovels, maps, thermal optics, ammunition, laminated porn, the will to kill zogbots and ethnically cleanse.

If Democrats win the Presidency, retain the House, and take the Senate, then we're 100% fucked. If Republicans can retain control of at least one branch of government, then we have a fighting chance.

Fertilizer

It is extremely unlikely that the Dems will take the senate.

guns need bullets

This, the Democrats getting control of the Senate, House, and Presidency all at once is very low. I'm far more worried about an attempted anti-2a Executive Order that Pelosi has alluded to the Democrats attempting when they regain the presidency. If it sticks things are obviously permafucked and even if it does get overturned by the courts it'll cause the kind of panic buying that'll make Sandy Hook look cute.

Attached: feinstein-trigger1-600x488.jpg (600x488, 42K)

great....4 more years of votecucks talking about the courts and branches of zog instead of killing people

>laminated porn

kek. might i also suggest condoms and toilet paper

As long as Trump wins re-election and the Republicans maintain the Senate then not much will change through 2024. He's to hoping this scenario plays out. Republicans retaking the House would be a nice bonus though.

>As long as Trump wins re-election

i think this will happen but it's not at all guaranteed. god help us if RBG croaks under president biden

There is legislation on the table about the "ammo loophole", allowing people to buy ammo with no background check.

Buy stuff that you can’t make yourself. Everything else, just don’t comply

just so it's on the record, here are the people pushing for it:

>On March 3, 2019, U.S. Senator Richard Blumenthal (D-CT) and U.S. Representative Debbie Wasserman Schultz (FL-23) introduced commonsense, bicameral legislation to implement instant universal background checks for the sale of gun ammunition. The Ammunition Background Check Act will be known as “Jaime’s Law” in honor of Jaime Guttenberg.

>Blumenthal, Wasserman Schultz, U.S. Senator Chris Murphy (D-CT), U.S. Representative Ted Deutch (FL-22) and other members of Congress were joined at a press conference in Washington, by Fred Guttenberg, Jaime’s father, as they announced the bill.

Do these chuckle-fucks know what reloading is?

delete this comment before they see it

Not to sound like a shill but get a fucking ghost gunner if possible
More and More code for is being written by the day and in the next few years these guys are going to be designing armor piercing projectiles ranging from 9mm-.308 that can be made with a GG
youtu.be/OUXO31CsmBU[embed]

But also yeah Binary Triggers and AR parts in general

I just picked up another 100 30-06 black tips and 100 silver tip projectiles for funsies, they were basically nowhere to be found during the last scare. I also need to pick up some assorted mags and a few thousand rounds of ammo before 2020, I'm getting pretty low on .308, 300blk, and 10mm.

and in relation to a GG get a 3D printer for mags, lowers and other non stress bearing parts for your AR. A lot of guys in the 3D gun community recommend the $200 Ender 3 printer

Trump supported the bump stock ban. I think they're pretty dumb and I'd never own one, but SHALL NOT. Fuck Trump for caving.

Speaking of Binary triggers I've heard that the ones made By Franklin Armory are shit and will outrun your BCG. I'm not sure how accurate this is but I've never heard the same about Fostech
But speaking about Franklin Armory their Providence PCC might be a smart investment in the future due to it not technically being semi auto but instead double action

A few cheap PSA rifles prettied up with some furniture wouldn't be a bad idea

>Pic absolutely related

Attached: Yikespatrol.png (1080x1675, 895K)

>For those worried about 2020 election shit, what should we be prioritizing?
Anderson/PSA and 30rd AR mags to scalp the panic buyers. A $35 lower you buy today could easily be worth $150-200 if we hit Sandy Hook levels of panic. Sames goes for mags, that $12 mag you bought could easily kick up to $50-75. This is your chance to flip some stuff for 5-6x what you bought it for and put that money towards guns you want when things cool down. I had a buddy do this last time around, he turned 200 pmags into $9k profit over the course of a year.

tons of never trump senators though. 2-3 seat majority is in the danger zone

>Implying she isn’t already dead. If President Biden happens, RBG will “pass away” shortly after inauguration.

Soon suppressors will be on chopping block because "he doesn't like them".

Attached: shrek cmon now.jpg (497x482, 113K)

>(((Guttenberg)))
They’ll even use their own spawn for political gain.

We don't know that for sure. He has a tiny attention span and he says a lot of shit he doesn't mean.

>Should we focus on suppressors, rifles/sbr’s, mags, or what for most important buys?
If you haven't already bought suppressors now is the time to panic buy, you never know what crazy the god emperor is going to get up too.

1. Mags
2. Ammo
3. More mags
4. AR lowers and more ammo/mags

>panic buying things on a registry
They’ll just come to your house and take them

>Implying it would be a blanket ban and confiscation.
>Implying it wouldn't be a moratorium on new suppressor purchase.
If they do ban them they'll most likely do it just like machine guns in '86, you'll get a post 20XX suppressor ban. They did it that way the first time around because it's legally difficult to confiscate what was already owned legally under the system they set up, so it'll just be a moratorium on suppressors purchased after a certain date and/or making them non-transferable between us non government plebs. It keeps the people that already own them somewhat pacified while ultimately getting what they want (long term) and avoiding most legal challenges.

Attached: 1560123176116.jpg (1024x715, 35K)

KAGWERKS so you know how to use what you have/what you're panicbuying.

More expendables. Mags. Ammo. Springs and pins and gas rings. And more stripped lowers, natch. They'll make useful currency in the underground of a Dem-ruled Third World shithole.

>tfw too young to buy lowers because they don't count as long guns and you have to be 21.

Attached: last rep.jpg (450x518, 119K)

I’m waiting for the 2020 election so I can sell my average AR and make a profit, then turn that profit into more guns after Trump wins again.

>Option 1
Buy some 80% lowers, worst case scenario you sit on them for a year or two, best case scenario you make a cool AR and dump the extras during a scare and make enough for a good optic.

>Option 2
If your parents are cool convince them to buy a lower or two for you.

>Option 3
Wait and pray for the god emperor to win in 2020.

Attached: 1557773260129.gif (336x331, 179K)

This is disgusting. Not the rifle. The absurd ass raping price

>4 unopened 30 rounders
Step your game up son.

Attached: image.jpg (4032x3024, 2.17M)

I think you are confused on the 1986 machine gun ban.
The registry was open for a certain amount of time. Within that time. All machine guns and auto sears had to be registered in the registry. After it closed, all machine guns were banned. Including those before 1986, that were not on the registry. Hence, the super inflated price currently, for a full auto reciever.
The exception being post dealer samples.

>I also have 4 unopened 30 round mags.
>4
Add a zero onto that number and you're starting to look good, until then you've got some buying to do.

Dont open them! I fucked up. I have a total of 11 magazines. I opened 7. I should have just opened 3 and used them and saved the rest. I do plan on buying 6 more. I know window pmags are hot. And I fucked up and opened it. I also need so clear lancers and fde mags. The rare ones will easily command $200 in a ban

Cringe

I don’t think opening them matters. As long as the still function people will buy them. But I also don’t plan on selling them, I just want enough for myself to last if I’m never able to buy them again.

I'm aware, maybe I wasn't clear as I should have been. I'd expect a suppressor ban to go the same way as the '86 MG ban, they'd close the registry and stop issuing new stamps, effectively banning new suppressors from being purchased after 20XX and allowing attrition to kill them off slowly over time. There's another option that might pass legal scrutiny, which is simply closing the registry to new suppressors and making them non-transferable, effectively getting rid of almost all legally owned civilian suppressors in 50-60 years. Depends on how far they want to go with the legislation and how much they want to gamble the NFA getting messed with in court.

I'm curious what brand of lowers were you buying? How much did they sell for (each)?

>I'm curious what brand of lowers were you buying?
Stripped Anderson lowers, picked them up for $35/each and transferred them using a kitchen table FFL. Dude charged a flat fee of $25 per transfer no matter how many items, so my total cost for 10 lowers was $375. Still bummed out he got his FFL revoked by the ATF, guy was super chill.

>How much did they sell for (each)?
I ended up selling most for around $300 and a few for $350 over the course of a few days right after the Sandy Vagina shit got real.

Ammo and 3D printers. And reloading components.

>an attempted anti-2a Executive Order that Pelosi has alluded to
Obama tried that approach. He spent a lot of time and effort trying to draft an EO that would get past SCOTUS. If he couldn’t do it, whatever horses ass they manage to get into the White House won’t have a chance. Remember, Obama was a Constitutional law scholar before he went into politics.

Didn't say they'd succeed. I'm more expecting an attempt to pass an EO to play to their base knowing that it'll fail, but completely fucking the gun market by sending it into panic in spite of the failure.

based and veighpilled

I hope this is true, and that Trump simply didn't know that suppressors were already heavily regulated/restricted. Otherwise, suppressors will go the way of the bump stocks.

Kinda makes me want to order four $400 CHF kits and try to do the same down the line. I don't know if I have the heart to gouge that hard though.

Buy a pre-built lower reliever with a stock on it = long gun. Usually they are roughly the cost of a lower + lower parts kit. You pretty much get free assembly. The only downside is you cant convert that lower into a pistol later.

I just wanna have the money to replace the guns I sold before the election.
Gotta get me another at pistol in 300bo
Probably a BRO or Saint

I feel the same way. I can’t stand people that do things like that, but I really like making money.

Thanks. Around me the cheapest kitchen table FFL does xfers for $30 (first) + $10 (each) for transfers after that. Limit of 5 and they have to be from the same manufacturer.

Makes me want to get my own FFL just to save on xfers. Those $30 PSA/Anderson deals look good until I do the math and realize that buying 5 $30 lowers will cost me like $ 265-300. I don't like the idea of fingerprinting + audits though.

Lol. You can just fill out the 4473 under longgun. That's what we do in CA.

Fellow Coloradofag here, I find standard capacity magazines all over the place. It's stupid that the law ever got passed in the first place, but exactly zero people are enforcing it. Stock up, friend- it's only going to get worse.

Isn't that, like, illegal?

Attached: capitalism.png (500x410, 210K)

Pmags are awsome. The only fear I have is the feed lips being polymer. To alleviate this, I keep the dust covers on to reduce stress on them. Honestly who really knows. Ive switched over to buying metal mags. They will outlast us, and if taken care of. Should go thousands of rounds.
Interesting
I just got back from the range. Overheard people talking about making their own. Basically, fuck the law.
But who knows. Their wasn't a registry for bump stocks.

Its clear to me. That it doesnt matter what state you are in. Universal background checks, magazine restrictions, and assault rifles are all getting banned when the democrats gain full control. And that's if we are lucky.
What mattered most was fighting to keep that shit from spreading all over the country. But gun owners think they are safe in there home state. Couldnt be further from the truth

And/or reloading components.
$20-30 of powder = 2000ish rounds of 9mm or almost 300 223.
Primers are about 2-3cpr
Projectiles can go down to 6cpr.

where can I get black tip 30-06? asking for a friend

This.

cdvs.us/product/30-06-ap-m2-162-grain-projectiles-no-pull-marks-pack-of-100/
Keep it on the DL bro.

Here's the link for loaded 30-06 AP rounds if you don't reload.
cdvs.us/product/30-06-ap-ammo-brass-case-mixed-headstamp-100-round-pack/

This is about the time in an election cycle where I hate everything

they will find out

and then they will ban it

reminder that people buying things now to resell later both stimulates the economy when it needs it, and increases supply and thus lowers prices during the panic. 'scalpers' with foresight are actually a buffer against panic price gouging.

Lowers, mags, and ammo are always safe bets. Even with the millions of surplus shit from the last election still floating around, normies will think $400 for a lower during the panic is cheap. Even PSA/Anderson shit was expensive. If you offer deals like say a populated lower, 7 mags, and 100 rounds of STEEL PENETRATOR ammo for $1000, you’ll sell that shit all day long to normies.

Yes

ammo
80% jig and lowers
LPK's, preferable M16 parts kits so you can make it REALLY illegal once every gun you own becomes felonious

>thinking there will be grandfather clauses

$6.25 pmags. You should be buying this. No one cares that the color is lame.
gideontactical.com/mobile/store/product.aspx/productId/18858/Magpul-PMAG-Gen-M2-MOE-30-Round-Magazine-w-Window-5-56x45mm-NATO/

FDE PMags can be dyed