/guts/ thread

IBM System x 3500

God I want this case so bad.

Attached: 13e2utp[1].jpg (1200x707, 99K)

Please ignore the edgy gamer motherboard that isn't supposed to fit this case.

Why do you not have push/pull on all your rads? There seems to be plenty of space. And what GPUs are those?

Attached: green_boi.jpg (3630x3260, 2.2M)

the guts

Attached: IMG_20170301_152357.jpg (4208x3120, 3.59M)

I'm gonna show you guys some real guts in a sec

mamma mia

Attached: Webp.net-compress-image (1).jpg (5312x2988, 3.38M)

Attached: gts.jpg (1500x1218, 458K)

Pretty good. Decent cable management and no gaymer LEDs everywhere.

that's hawt

May do that

780ti's, I'll upgrade when in a couple years

>Giant "game rock" sticker on the gpu
Alright.

Attached: snip.png (432x681, 639K)

It's kinda hard to avoid gamer logos and the like on consumer GPUs since that's what they're made for. Unless you spend top dollar on a workstation GPU you're gonna get shit like that.

I like the way EVGA does their new cards. Just the model name lit up on a plaque on the outward facing part of the card.

Yep. Flashy but subtle at the same time.

which one is it

clean your shit

Attached: guts4.jpg (1227x1080, 657K)

*violent sneezing*

When are you going to take a better picture so we can actually get up in your guts, bulliedbru?

Attached: sdg3244yefhdfghf.jpg (3184x1836, 1.34M)

Very excited to participate in these threads in the future, as I’m building my first PC sometime next week.

Good luck, take your time, think a couple steps ahead, read the fine print and have fun!

Attached: etrnZqa.gif (360x198, 1.85M)

Dancase C4-SFX

It's not out yet, kickstarter's gonna be soon but I'm too poor to afford a new rig.

>AIO has really wide pipes
>Diameter where they connect to the radiator is tiny

Why do manufacturers do this?

They aren't really wide pipes, they just have thick wrapping/insulation on them to make them look thicker. There's a reason open loops outperform them, and wider pipes and larger flow rate is a big one.

just put her together.

Attached: 0611091905-00.jpg (1600x1200, 310K)

>fx
Why not upgrade to ryzen?

I'm gonna start buying stuff next week. I haven't decided between a 2600x or an i5 8600k

8700k. Do it. Why cut corners on something that will last years upon years over a cost difference of like 3 back alley dry handjobs.

>intel
Im pretty sure user doesn't want another housefire

If the housefireness of the 9590 bothered you go for the 2600x they are pretty much the same other than ryzen has better pro performance and costs less

Attached: flat,800x800,075,f.u1.jpg (800x800, 63K)

8700k literally destroys the 2600x in every single way

I cant wait for Zen 2

Attached: IMG_20180221_214447990.jpg (1536x2048, 546K)

8700k literally destroys power bills

Attached: 2700xpower1.png (712x1441, 158K)

Bit of a WIP. Gonna upgrade cooler, and GPU once new ones hit

Attached: IMG_2649.jpg (2034x1538, 665K)

First PC build, I've added an exhaust fan (black) since taking the picture.

Attached: IMG_20180524_234928_HDR[1].jpg (4160x3120, 1.66M)

Built this on Wednesday.
Ryzen 2700X
MSI Bazooka B350M
Corsair Vengeance 16Gb 4x4 3000Mhz
Corsair Carbide Air 240
I already had:
Gigabyte GTX 1070 Windforce OC
Corsair RM750x PSU
250Gb Samsung 960 EVO NVMe

Attached: IMG_20180608_191239.jpg (4160x3120, 1.55M)

>TFW Can run my 1700 on 100-110 W for the same rendering performance

>2700x
>shitty b350m
Y I K E S

Any better recommendations? I wanted to get matx form factor jfyi.

>shitty B350M
why? and... any better B350M than that one?

3.6GHz stable (stock is 3)

Tried 3.8 but was randomly giving BSODs.

Attached: IMG_20180402_161458.jpg (1687x949, 248K)

>Show yours
No point to it, but since you asked.

Attached: 001 (2).jpg (4160x3120, 2.54M)

What case is that? Looks to me like a Bitfenix Neos. That was my first case, I like it. What color do you have at the front also specs?

Attached: IMG_20180608_223725[1].jpg (4160x3120, 1.28M)

It is a Neos, front is red.
Core i3-6100, Gigabyte GA-B150-HD3P, Crucial Ballistix 2x4GB DDR4-2133, Gainward GTX 460 SE, Toshiba SSD 128 GB, Seagate 1TB + 2xMaxtor 0.5TB (Raid 0)
I got the GPU and the Maxtor drives for free, made a nice poorfag setup.

Any point of getting a GPU before the reveal of the 11 series?

Attached: 20180608_174514.jpg (4032x3024, 1.53M)

Cant hurt to wait, worst case scenario the new cards are garbage and you can get a used 1080ti when prices drop.

Attached: guts4.jpg (1440x3736, 1.14M)

Attached: guts1.jpg (2888x2166, 1.8M)

I don't understand why you have that fan cooling the VRM units when you're obviously not overclocking with that 80 plus shit PSU... What gives?

no airflow meme

fix your cables

poverty

>that outtake fan

edgy mobo

shit pic/10

bland nvidia/corsair/evga/Asus showcase build #160784 and #167074

>fury

the few builds with little to complain about

Yea its called x470

Actual cucks that deserve to be laughed at

Not him but better safe than sorry.

Case ?

>fix your cables
This isn't even my final form.jpg

Attached: IMG_20180609_042644.jpg (4608x3456, 3.31M)

>throw everything in there and hope it works.jpg

its a budget board with crap vrm's. in this case the fan helps greatly to combat trothling and temperarures

>bland nvidia/corsair/evga/Asus showcase build #160784 and #167074
Bland is fine, utility is the name of the game for me. As long as it runs cool and reliably I'm content, even more so when the components are relatively cheap and easy to service.

Attached: 34wygrgn456u45thgheh.jpg (1512x2016, 841K)

Attached: 1492557140801.jpg (267x200, 9K)

Please tell me you have terrible cable management ironically as a joke or something. It would take like 15 minutes to make it look nice.

wcan you share that wallpaper please?

Attached: 6df.png (1920x1080, 1.31M)

the retarded user is already running a fucking 9590 lol 8700k is a good 50 watts step down already

>fix your cables
cbf im always changing something

Quit posting this piece of shit every where you autist.

what water pump is that?

>Gigabyte GTX 1070 Windforce OC
>no airflow case with stock cooler
Lol i put one of those on my 1600x and it choked sounded like a jet engine
even my d15 struggles to keep my 2700x cool with no sides front on my case 76 degrees at 100% load LOL hope you're only using that for light gaming under 50%

Just finished.

Attached: Guts.jpg (1500x2000, 2.01M)

As much as I love your ghetto "it just werks" system, I really have a hankering to give that R3E board the build it deserves.

Looks great.

Stop crying.

Here you go.

Attached: 37772.jpg (3440x1440, 407K)

Middle meant for Stop crying.

You're an idiot.

Beast rig. RX560 NZXT s340 EVGA 600 Bronze. Come at me.

Attached: IMAG2697.jpg (2688x1520, 994K)

Attached: IMAG2734.jpg (2688x1520, 846K)

Crying. Stop it.

>all those drive bays
I need this

Node 804 - Fractal Design

Attached: 05060008.jpg (3415x5122, 2.28M)

>FX-9590
There's something you don't see everyday.

Attached: waifu_reaction_face_request___wowzers_by_piddlepoddle-d5tgqfa.png (850x786, 447K)

>that maxwell titan
You're cool user, I like you.

I have the Primochill System Reboot running in it right now, which is why my reservoir is foamy as fuck

Attached: computer.jpg (1024x937, 293K)

Iwaki rd-30, a 24v industrial pump of some sort (for cooling large lasers I think) that I soldered a 12v molex connector to.

Very high quality and is still more powerfull that any pc watercooling pump I've seen.

I think they're pretty expensive, but a few years ago some guy on ebay were selling a bunch of them for like $40 un-used, and a friend of mine snagged a couple and gave me one.

You mean in a $300 tempered glass case with $400 worth of rgb leds, $100 sleeved psu cables and anime figures sitting next to it?

I guess she'll have to do without.

I could agree I should clean up the dust and atleast do some cable management, but it ain't happening.

She's a warrior, user. And there is no time for makeup.

Attached: 1528238417754.jpg (1079x1600, 176K)