Anyone know which wire is ground, left and right audio?
DT990 Modding
James Wilson
Ian King
Measure it
Dylan Lewis
Id say the bare copper with clear plastic is the gnd
Gavin King
No multi meter like a retard
Jeremiah Carter
And R/W is 1 pair and G/W is the other.
if it isnt then just switch it
Jaxon Mitchell
Either the red or white has to be it as the black wire that goes to the right is for the right ear cup so either could be it. And then the circuit is strange for it being red as ground or clear.
Evan Harris
Dominic Nguyen
So clear is the ground for the left cup and white is the ground for the right?
Blake Bailey
Ive seen them all but the cup wiring is different from mine.
Connor Mitchell
It looks like the Clear coated red and green are ground for either left or right and the clear copper is just ground for isolation or whatever. solid plastic i would think is positive
that makes sense to me
Sorry captcha locked me out
Eli Turner
You really had to ask this?
Jacob Perez
Do you have 9V battery?
Austin Wilson
not OP here...
this sounds like a horrible idea
Im intrigued
Wyatt Nguyen
Nope but if its powering a wire to see if it get hot no.
Jacob Johnson
>this sounds like a horrible idea
To someone completely clueless about electronics, yes it may sound like that.
Tyler Turner
This should work OP
Sebastian Morgan
Care to explain please then? I have no idea still which wire is which.
James Gutierrez
Dammit OP just try what said.
ffs.
Lucas Gutierrez
Tried it and now it works with the correct channels but the volume on the right is rather quite compared to left making it sound more like 65% to the left for only discord that I can tell. My other headset sounds fine so something I did wrong?
Mason Sullivan
that doesnt really sound like a wiring prob. are you sure you didnt change anything else?
Jack Gray
I swapped the cable for a 3.5mm jack. This is what I came out with. The yellow being left signal, white being ground and the black being right signal.
Jonathan Martin
Forgot image
Liam Cooper
I dont rally know much about electronics but that sounds like some sort of resistance somewhere making the volume quieter... is the jack completely passive? (just metal and plastic, no electronics?)
Andrew Fisher
*really
also why u naked?
Gabriel Turner
Wire diagram
And shorts on my knee
Adam Walker
^^
Angel Taylor
Tried re soldering the joins and nothing and then shit just fell apart so its now broke. The solder joints to the circuit board fell off and I broke a tiny wire connecting the yellow and ground.
Jason Jackson
Damn. so is it done for?
your diagram looks right but you may need the 4 contact 3.5mm jack with gnds for each channel
Connor Stewart
What do you mean?
Jose Miller
wait never mind i dont think that would work.
try re-soldering it if you can and try it on a different device. can you get a good photo of the end f the aux/3.5mm cable?
Ryder Sanchez
Taken it out now, but this is what the jack looked like.