how do I set a custom thumbnail for webms? everything I try just ends up being the actual video with the image appearing for half a second
Grayson Turner
So I bought an extra charger for my phone which has an output rating of 1 A at 5.1 V. However while charging my phone only draws anywhere from 100 to 300 mA, with maybe less than 200 mA on average (measured with an app called Ampere). My phone tells me it is "charging slowly" with this charger. But I have two other chargers, both with output ratings of 850 mA at 5 V from both of which my phone draws anywhere from 600 to 850 mA and charges at the speed it should.
What gives? Is the new one just cheap and inefficient? It was only $5
Cameron Howard
god i wish that were me
Jace Green
You'd need direct access to the server holding the database.
Sounds like it's either dead or some chink shit that's mislabled.
Brayden Campbell
How do I safely root my LG K20 and or buy a cheap phone that I can be the admin of
Carson Ross
Dude, there's no excuse for owning less than 2A chargers these days. Nearly everything benifits from it, and it gives you overhead for shitty cables, which most are. Fuckin shell out and be glad forever.
William Hill
Reposting my question in new thread My old living room PC setup used to be comfy as fuck. Had two monitors and one TV plugged in to the old 1070, with one of the monitors being duplicated on the TV. Now I got a new 4K TV and it's all fucked up and I don't know what to do. When I use the same setup, everything being shown on the TV and the monitor it's duplicating goes down to 30fps. Pic related is what I'm being shown in the Advanced display settings menu. Now, I can see the TV refresh rate is 30hz for some reason, but the moment I disable the Syncmaster, it goes to 60hz. Also, the TV has HDR but it's showing up on the information as SDR. Already tried going into the "Display adapter properties for Display 1" and changing it to 60hz, but it resets itself back to 30hz interlaced when I open it up again. Any ideas as to what might be causing this?
How much should I be spending? The store I bought this 1 A one at had 2 port 2.1 A chargers but they were only $8, which sounds really cheap to me. And I only have the one 850 mA charger because it's the one that came with my phone.
Matthew Myers
They don't always provide the best charger a phone can use, and that seems pretty low for a phone that's viable in 2018. I highly doubt the 2.1 does that much on both ports simultaneously, but that's a lot more headroom to work with even if it's a shitty one. Ideally you'd go with anker shit, but even cheap no name works out sometimes. Just don't go spending a lot on aukey. I fucking hate their shit.
Levi White
If possible, how would I allow a laptop to boot over a network into an instance of an operating system running on a server that can be used until the laptop powers off but creates a new instance whenever a device connects (old instances will be deleted)
Is this something VMware or openbox can do or would it be something like remote desktop or pxe?
Also unrelated, why is captcha all about driving, is goolge using it to train AI for self-driving cars?
Brody Gutierrez
Block it in your host file
Ryan Ortiz
whats the best beginner programmer language (not necessarily the easiest one) and how do i learn it
Alexander Sanchez
Is there a downside to booting your OS from an eject-able media, such as an SD card instead of a normal laptop harddrive?
Jace Hughes
There is no "best", what you want is to find which ones are most marketable to companies that will pay you
Justin Thomas
oh, i'm not looking to get into it for money, just as a hobbyist
Luke Moore
I am planning to make my own RV but one thing that has been bugging me is how I will get internet. I have an 'unlimited' plan and can use hotspot but it does have a limit and slows down INSANELY so I was looking for other options.
I thought about ways I could easily access public wireless points from inside of my RV in user friendly ways for family or friends. My first thought is to use a laptop or SBC with a powerful directional antenna to connect to wifi that is indoors and probably at a far distance like a few parking spaces and a second normal omnidirectional antenna for creating a static wifi network inside the RV.
Would this be possible? I have limited knowledge of how networking and antennas work. Thanks for any advice!
Look into thin clients. >Also unrelated, why is captcha all about driving, is goolge using it to train AI for self-driving cars? Yes, and drones.
Joseph Parker
It's slower. Also it tends to destroy flash memory since that's not what they're designed for. An external SSD is better, although you can't run TRIM over usb, which means an eventual performance hit to most drives.
Jonathan Morgan
What program to use to create PDFs via scanner on Windows? Preferably multiple scanned pages per pages possible, but can just merge afterwards if program doesn't offer it.
Henry Nguyen
Office.
Charles Thompson
is there a way to use the graphic ports of a motherboard with an nvidia card if my CPU has no integrated graphics?
Ian Cruz
Where do I learn to do sysops stuff with aws for free?
Angel Morales
Ended up used SANE & gscan2pdf Didn't think it would be more trivial on fucking Linux of all things.
Bentley Richardson
No.
Adrian Morris
Back in the day, this would be the sort of bullshit I'd cure with RivaTuner, but I dunno if they are still updating that thing. Otherwise, I got nuttin.
Kevin Green
nvm figured it out
Lucas Foster
;^) Honest question though. All the stuff on amazon requires you to pay for courses/work you do. I have enough money for the exam and a few stuff, but I can't afford 1k or so for a course to use aws.
Kayden Thomas
>They don't always provide the best charger a phone can use, and that seems pretty low for a phone that's viable in 2018
Well it's a Nexus 5 from 2013. Anyways I guess I'll just order an anker or something online
Austin Baker
Why does every website outside of Jow Forums treat gifs and videos as the same thing? They absolutely are not.
Hunter Butler
So i have a laptop with intel and amd switchable graphics. That causes some problems and i want to know if there is a way to turn the AMD card off.
Brayden Wright
Disable in BIOS?
Xavier Bell
I watched a lot of RMS videos and one thing always bugs me - if i write free software and he says that I can sell it, what prevents the first user who buys it to freely distribute the copy gratis when its allowed? How do i not lose money selling free software then if the very licence allows it?
Aaron Murphy
My wives are so cute.
Leo Ross
Updated BIOS to get 22nm CPU support. No boot. Figured I had to switch to AHCI mode. Worked. Now my comp freezes at random times. Could booting on IDE mode have messed Windows up, and is there a way to check it without reinstalling it?
So i think my hdd just died for good? Had 3 bsod today, not able to reboot after numerous tries with the third one, errors are pointing to my hdd Am i still able to clone an image of it onto the hdd i have coming in a few days? How do i go about that exactly?
Christian Ramirez
Is there anywhere I can download I list of image hashes for popular boorus like sankaku, konachan, danbooru, gelbooru etc?
Austin Hernandez
Create a live linuxUSB, dd the old drive to the new one.
Landon Hughes
Nobody said anything about making money on the free software component. You're just allowed to sell it. Consider RHEL for instance.
William Long
Thanks Would there be any complications with the new hdd because of the read errors on the original hdd?
>Would there be any complications with the new hdd because of the read errors on the original hdd? thegeekstuff.com/2010/10/dd-command-examples The drive is failing, the best you can do is try. Worst case scenario it doesn't work and you lose everything. dd if=/dev/sda of=/dev/sdb conv=noerror,sync Make sure to check what the disks are labeled as, the source disk (failing one) may not be sda and the destination disk (new one) may not be sdb.
Joseph King
pretty new to javascript, need to make a survey so I have a form that shows all questions seperately. My code works but going back or forth I need to click the button twice the first time going either direction and dunno how to fix. Here's my code, plz halp.
var i; var a = 2; var b = 1; for(i = 1; i < 31; i++) { jQuery("#vraag" + i + "but").click(function(){ var check = true; jQuery(".radio-vraag" + b + " input:radio").each(function(){
if(jQuery(".radio-vraag" + b + " input:radio[name=vraag" + b + "]:checked").length == 0){ check = false; } });
if(check === true){ jQuery("#vraag" + a ).css("display","block"); a++; b++;
}
else if (check === false){ alert('Selecteer 1 van de mogelijke antwoorden.'); } })
jQuery("#vraag" + i + "vorige").click(function(){ jQuery("#vraag" + b).css("display","block"); jQuery("#vraag"+ a).css("display","none"); b = (b - 1); a = (a - 1); }) }
Jack Torres
>RHEL well then, if i dont plan to make a whole serious distribution, what encourages me to make free software for profit if the profit is solely dependant of people not getting the version elsewhere? Does it mean that for average everyday software people make, free software cant be used as a way to make a living, if you arent working for an well established corp like red hat?
Austin Wood
Is windows 10 Education ok to use?
I think I have a legitimate key to activate with or would LTSB be a better option.
Matthew Allen
>Does it mean that for average everyday software people make, free software cant be used as a way to make a living, if you arent working for an well established corp like red hat? Isn't that basically every app on the playstore? I'm sure some of those companies make good money, like whoever owns those games that gross millions.
Ian Morales
brainlet here how can i do something like if x = 0 do one thing, but if x > 0 but < 50 do something else in bash?
Brandon Flores
>integrating a database with my java code >can't make a database >can't code
How do I open nemo (or anything for that matter) from my terminal without then getting all the cruft from that program in the same terminal? I tried : & nemo . but it doesn't work.
if (( x == 0 )); then < do one thing > elif (( x > 0 && x < 50 )); then < do something else > else < do something if x < 0 or >= 50 > fi
Nicholas Brooks
My wife left me. Luckily we didn’t have any kids, but still. Feeling kinda shit rn. Where can I go for something to cheer me up?
Isaac Stewart
Anime.
William King
My HDD doesn't show up in disk management and makes a sort of wind-up sound (like a wind-up toy) when booting, it's completely fucked, yes?
Josiah Barnes
>tfw 21 >slowly realize that my programming abilities are printing hello word and a simple for loop at best >even if I get a degree my best bet is fooling some idiot into hiring me for shit money Someone end my life familia
Elijah Carter
Fuck. Last anime I enjoyed was “Cells at Work!” It just ended not too long ago. I always like more wholesome stuff, I suppose since I’m kind of a generic white guy that isn’t an actual weeb. Any recommendations for wholesome? Like cutesy feel-good shit I can find on Crunchyroll that won’t make me feel like a pedo?
Joshua Walker
thank
Xavier Collins
My wife introduced me to Nichijou, shit's pretty funny for a girl's anime.
Jaxon Russell
>Like cutesy feel-good shit I can find on Crunchyroll Yeah, lots. Where to- >that won’t make me feel like a pedo? You're screwed.
Benjamin Hughes
Can you see it in diskpart from the command line? If not, try a linux liveUSB and see if it sees it.
how do i change my google play account back to my current region? i tried to change the region of the account to another region (not my true physical location) using VPN and/or fake location (forgot the details) after a while i found that the region of my account changed to that region without using any technique and now i want to change it back to my original region, but i cant find any options to change the region (both android app and desktop site) what do?
Aaron Hernandez
Well that's worrying. Here's to hoping I don't lose years of saved data so I won't pick up smoking again. Thanks user.
Hudson Long
Always keep at least three copies of anything important.
Kayden Gutierrez
how do I make a facebook account tried the other day and it was banned now I tried to make another one and it won't let me
It's the other way around. If you have to any and all justify females on screen with "I want to fuck them", that's a yikes from me. If you can't enjoy cute girls doing cute things because of the fun and healing, I feel sorry for you.
Juan James
This show is pretty good, thanks user. Already had me cracking up a couple times.
I do alot of web browsing, media editing, gaming, and alot of other things that use the mousewheel heavily. I have some shitty magegee mouse and this is the second one in a year where I've blown through the scrollwheel, and I'm looking for help on a replacement.
I need something that: >has a strong, long lasting, notched scrollwheel >no crazy spiky over the top designs, something simple >i dont care if it has lighting or not im not gonna use it >under 50ish bucks
i know 'not your recommendation service' but you guys are the only people i know who have knowledge on stuff like this.
Cool, glad you like it. The other one she likes is Azumanga (I think that's the name). But I think Nichijou is a lot funnier, and not written for girls.
Jackson Hall
Oh, if you like some wacky stuff, check out Excel Saga hahaha. It's like shitposting meme anime from the 90s.
Henry Ward
IS this a good gaming prebuilt for 900 euros? AMD Ryzon 3 2200G 3.7GHz, AMD B350, 8GB RAM DDR4 2666MHz, Radeon RX570 4GB, SSD 250GB + HDD 1000GB, Windows 10 Home 64-bit
Gabriel Reed
nice
Gabriel Powell
Do all those components, when bought separately, cost more or less than 900 euros where you live?
Nicholas Watson
I have a crt tv which i want to use amazon fire stick with. A hdmi2av converter would do the job u guess? Also for a monitor with vga port a hdmi2vga port will do?
Easton Jackson
>A hdmi2av converter would do the job u guess? Should work >Also for a monitor with vga port a hdmi2vga port will do? You won't get sound.
Grayson Bell
How do I check if the UPS battery still good? My UPS no longer seem to work, and when there's no power it just shutdown. Is is the battery?
How do I make sure it's the battery? Could it be something else? Like the converter or something?
Justin White
If it's not lasting, then the batteries are not storing a charge. Replace them if you can. UPS batteries don't last forever, even if they are just in passthrough mode the whole time. I just replaced the UPS batteries where I work a couple months ago. They are suppose to be replaced every eight years or so. Over 200 batteries lol. Good workout.
Brody Miller
>If it's not lasting That's the thing, shouldn't a dead-ish battery give at least few seconds? And it's only powering a router.
Elijah Brooks
>That's the thing, shouldn't a dead-ish battery give at least few seconds? No. If it's dead, then it's just conditioning the electricity that's passing through it. >And it's only powering a router. ??? If you lose power to the house, you'll lose internet too. What's the point of putting a router on an UPS?
Chase Cooper
>??? If you lose power to the house, you'll lose internet too. What's the point of putting a router on an UPS? Sorry, I should explain. Where I live ISP provide internet through broadband, so the UPS is connected to a router and Ubiquiti Nanostation. That way even if the power is out I can still get internet. How much does a new battery usually cost? I assume I should get the same voltage, but what about amperage/hour value? Should I get a new UPS like pic related?
>How do I force myself to like programming? You can't. Don't do a job you hate.
Ryan Howard
>Like cutesy feel-good shit 5cm per second or Welcome to the NHK should do the trick.
Luis Cox
I have to design and print using 3D printer a casing for a robot. I am a CS student and I have literally 0 experience with 3D printing, but I have some AutoCAD experience and I have some ideas how to get the schematic done. I have access to 3D printer, but I don't know how to get started. Any recommendations for entry-level literature for 3D printing? i will be using Makerbot Replicator 2 and Ultimaker 2+ printers.