Didn't see one so I'm making one

Didn't see one so I'm making one.
Guts thread.

Attached: PC-20190906.jpg (2880x2160, 2M)

Attached: IMG_6532.jpg (2074x1383, 619K)

i like the copper piping but from the looks of it there is aluminium in that loop as well, not recomended for a long term thermal solution.
Don't mix them metals son

here is a pic of some old crap I put in a case the other day to give to a poorfag friend

Attached: IMG_20190608_195013.jpg (4160x3120, 3.07M)

The fluid only comes into contact with nickel and copper, both of which are compatible. I was careful to avoid any aluminium parts.
I'm a roofer so I like to pretend I know what I'm talking about when it comes to galvanic corrosion

noice

ya done good son

Attached: 1446220174538.jpg (359x450, 67K)

What case?

fag

I'm using that same Gigabyte X58 board right now. Protip: Pry off that blue branding shit on the heatsinks to improve chipset and VRM temps for free, by getting more airflow over the fins.

Attached: guts2019.jpg (1864x898, 275K)

Kek, pseudo intellectual BTFO

>1510
>3200MHz
lolno

thats just how speccy shows it

if you add 1510 up you'll get close to 3200 mhz ;)

also notice the gpu shows only 4gb of vram? thatgs also an error. Same for CPU OC

you must be very new to speccy but thats ok my new friend

it also gives wrong readings for many amd cpu thermals

hwinfo is much more accurate
you are lucky if speccy tells you the cpu half of the time especially for newer hardware
Speccy will also always show stock cpu frequency on summary and will almost always show 4095mb for almost all gpu cards of 4 gb or greater

Nope. I have same chipset and 3200Mhz RAM, it will show was 1600.
You're just running it at 3020Mhz.

>have 8gb vega
>shows 8192 mb
sure thing kiddo

read harder
>almost always

does XMP get disabled when you format windows?

Welcome the diarrhea.

Attached: guts_new.jpg (2592x1944, 1.57M)

nice small oven you got there

ever heard of airflow?

Yes, I witness it every day as cool air flows in and hot air flows out.

Are you one of the simple minded people who still don't understand metal isn't see through and can indeed hide other parts located behind it?

interesting, im sure the air has it easy to try to get around in a tight space like that

btw you could probably have 10C lower temps if you just got a decent case

what metal are you on about? Im obviously talking about those cringe chocking gaming fans

Sex with figurine

I have the best pc than all of yours

go back to /v/ faggot

>gaming fans

>water cooling
have sex, incels

I'm seeing an 80% constricted intake window on the bottom and a 10% surface area equivalent intake slits in the front.

You better run that shit on mineral oil and not some gaymen electrolyte.

I think I have the same mobo on a PC, with a cheap X5675 at 4,2GHz (anything higher overheats or crashes)
Do yiu have a similar CPU there? Which settings?

what case is that?

Where's the reservoir?

Attached: IMG_20190309_180505419.jpg (4096x3072, 3.37M)

was considering a xeon for it but all I had at the time was an i7 920 OC'd to a mild 3GHz

X5675 is failry cheap so might be worth the upgrade from the i7 920. It is for a mate so if they don't mind dishing out a little extra for better performance then the X5675 shall be purchased

finally bought an ssd

mixed metals/10
cozy

Attached: sausage in a hallway.jpg (2160x3840, 3.45M)

see>>>stock intel cooler -10 internets

>3 sticks of 8GB RAM in a dual channel motherboard.


bruh...

Attached: 2019-05-09 20.24.50.jpg (1925x1971, 1.12M)

there's actually 4 sticks, two of them don't have heat spreaders

Clearly it's not, just look at the Speccy

>24GB DDR3

That's 3*8GB.

*DDR4

8 + 4 + 8 + 4 ddr4

Ahh, so it's even stupider.

It's mismatched density

Yeah, do that user, it was just ahead in single thread at 4,3GHz vs my current 4790 at 4GHz all core and 4,2GHz single core. And obviously much better in multicore. The X5675 would be the better overclocker, and higher base clocked chips are too much expensive compared to that one.

thanks for the info user

It shall be ordered!!!

how did you shape the copper pipes?

Attached: guts.jpg (2000x1752, 2.54M)

probably with a pipe bender

had to take half the structural components of the case out and modify a fan but I fit _all_ of the radiator in it

Attached: IMG_20190424_120347465.jpg (3264x2448, 1.94M)