HALP

HALP

Attached: IMG_20190802_203013.jpg (3382x2498, 2.29M)

oven technique
/thread

that happened to me once, I just pried the CPU off

>flathead screwdriver
>wedge in between CPU and heatsink
>PRY AND JAM, WIGGLE, PRY
>POP!

>CPU separates in half into a thousand little stringy nightmares

You could have prevented this

Attached: 169040_333BE1AF-D8A0-4056-BF23-3F2B38C6FDC2.jpg (1500x2000, 420K)

just twist it off

have children.

lick it

This.

Preheat your oven to 300 and put it in for NO LONGER THAN 3 MINUTES.

You WILL ruin your processor if its in for too long.

Will a hair drier work?

Yes and twist

Is your hair wet?

twist?

dilate.

THIS

pga a shit. it shouldn't be possible to rip out the cpu removing that tiny hsf. indefensible.

Soak in alcohol, and try separating by sliding not pulling.

hair dryer to heat it up

Find the thinnest rasor blade you see and JAM IT IN

Rotate the cpu and tug on it as you apply heat. I think that's what they mean

>amd

Isn't thermal paste specifically designed NOT to do this?

Plastic pryer and heat and twist. Also that's a sexy heatsink.

Use your fingetnails. Make sure ypou are grounded thoigj

I certainly hope not, happens to me all the time

Mine only goes to 250, is it safe to let it sit longer at a lower temperature?

holy shit you are retarded

why not just drop it in water and let it sit for a few hours

perfect delid bro

Just twist

It's what came in the box of the Ryzen 2000 series

twist it to the side to the fins , you will have to clean off the paste from the fins afterwards though

this cooler is a piece of shit tw

Lmao that worked thanks

>shartel

Make it slide to the side until it's free. I can't believe the pins are fine.

Attached: 1345409024982.jpg (960x639, 146K)

no retard, the thermal limit of silicon semiconductors is like 500-800C if there's no voltage and current running through it

Can I get an AMD cooler to bolt onto an Intel socket through any means? The cooler that came with my last AMD processor is fucking nice.

use a plastic card (the ones they give you in shops) and apply a sawing movement when inserted between the cpu and fan. then gently insert your penis

Maybe there's adapters but I've never searched for them