Jow Forumsuts thread. Post em. No cleanup

Jow Forumsuts thread. Post em. No cleanup.

>3700x w/212 Evo Black Edition
>Asus X470 Strix Itx
>Sapphire 5700xt Pulse
>Fractal Nano S

Attached: 20190913_123740.jpg (4032x3024, 2.94M)

Looks nice how are the temps?

Really want to go with a ITX build for the aesthetics of not having a giant box on my desk.

Attached: why_yes_i_have_noctua.jpg (720x960, 150K)

Attached: Comp-1.jpg (2016x1512, 902K)

How bad are the bearings on those fans?

the tubing is starting to get a lovely green patina

Attached: PC-20190719.jpg (2880x2160, 2M)

They're quiet as fuck actually. The corsairs make more noise than the enermax's

Did you post an older pic, because I'm not seeing any green

i hate this shitty pc

Attached: 20190917_005454.jpg (3456x1944, 1.45M)

Why? Did you decide to stop being gay?

Temps are pretty shit currently but stable if running something demanding. I did furmark for 6 hours and GPU sat at 100c. I'm going to be swapping fans for noctua and adding a bottom intake for the GPU. I haven't checked CPU temps yet but last time I checked they weren't higher than 60-70ish under load I think.

really tempted to get one of those sub 8L aluminum enclosures off taobao.

Attached: guds.jpg (4157x2469, 1.84M)

I can't even tell, but what case is that?

Yeah I really wanted to go with a dancase a4 or ghost s1 but fuck man 200+$ smackers for a case hurts my soul. Plus at the time I was tossing up getting either the 3900 or waiting for the 3950 and there are no coolers that can handle the TDP on paper currently from the research I did.

>top intake

>using itx boards
Kek just get a O11 dynamic and get the size of itx with atx board.

yeah, smallest case i would cram a 3900/50x into would be an NCASE M1 with a D9L or SG13B with an AIO.

Suggestions to clean up the inside?

Attached: KIMG0120.jpg (4160x2340, 2.02M)

those tubes dont rub on the fans?

Attached: current guts.jpg (3264x2448, 1.76M)

you left your GPU at 100c for 6 hours?
Did you spend the money you should have used for cooling on a lobotomy?

no, I made sure they didnt, but yes they are very close

Still using this old case for my 3900X

Attached: guts.jpg (2576x1932, 1.56M)

Only thing I could recommend is getting some sleeves extensions for your mobo and GPU connectors to make those a little clean. Looks like the AIO is what it is in terms of routing.

oh, I was thinking about getting some cable mod wiring harness for the GPU and what not, but I'm not sure if I want to spend another $70 just to tidy up a little more.

Attached: 20190830_195419.jpg (4032x1960, 2.42M)

AMD Ryzen 3900X 12c/24t
Nvidia 2080ti Founders Edition
G.Skill Trident Z Neo 2x16gb 3600mhz CL16-16-16
Asus Crosshair VII Hero (Wifi)
Samsung 860 Evo 1TB
Noctua NF-12 iPPC Industrial 3000rpm x4
Noctua AF-15 x2
Noctua U12A Cooler
Seasonic Prime Titanium 850w
Fractal Design Meshify C TG White

Attached: TombsRig2.jpg (1522x1080, 404K)

What is this, 2008?

Might upgrade to 64bit one of these days.

Attached: bentium rig.jpg (1740x2320, 719K)

My high mobility machine, Latitude E6230

Attached: IMG_20190916_214540.jpg (4000x3000, 736K)

why are you ashamed to post a pic with all your rgb on

>Water cooling

I take it conversion therapy worked out?

Lmao your PCs gonna fly away if you keep adding fans

Nice recommendation. Any other small case that can accept ATX mobo?

Attached: 343720E7-CC57-4398-BF07-DF0EE9C42C4A.jpg (4032x3024, 2.76M)

Why is there so much wasted space?

Did you put the PSU's fan upwards or downwards?

I have since changed the gpu color to red

Attached: 20190911_183608.jpg (4032x3024, 3.74M)

kek
had to check bc i dont remember

Attached: 1568689160114_3910869522122147.jpg (2048x1152, 826K)

3700xt
ASRock Fatal1ty b450 mini itx
5700 xt red devil

Attached: 65DAC56A-04FE-49D9-93DE-B0B6411B6E87.jpg (1030x817, 809K)

What the fuck does this even mean, the 011 Dynamic is a huge case like it's not even close to ITX size. Seriously struggling to understand the point of this post.

Attached: itx.jpg (1134x1446, 1.03M)

Attached: IMG_0023.jpg (6000x4000, 3.76M)

My case came with a built in PWM fan repeater, which I have attached 5 fans to. Is there a way (software) that I can manually control these fans? My motherboard lets me control fans directly connected to the PWM slots on the motherboard, except mine are all connected to the PWM board built in to the case.

Is there a solution?

owo are you a cute

Attached: image0-175.jpg (1080x554, 103K)

Attached: IMG_20190917_010008.jpg (1296x970, 476K)

Just upgraded

Attached: IMG_20190917_141110590.jpg (1560x1560, 538K)

what did you upgrade exactly? also what case are you using?

The GPU.
I actually bought a Vega 56 but traded for my friend's 580 because the vega doesn't play well with my PC.
The case is from a Microlab prebuilt from 2002.

My ass SFF build

Attached: IMG_20190904_195420.jpg (2000x1500, 2.22M)

I do have a GPU. It's a old 1070.
Probably just going to swap it out for a 2060 SUPER or 2070 SUPER and use a NVMe drive for the OS, with two 1TB SATA SSDs in RAID for storage. Didn't even plan on using this build, was supposed to be temporary but it works fine and has been dirt cheap, with better temps than I expected even when overclocking, so.

Attached: file.png (750x1000, 1.2M)

$3,600 computer edition

Attached: guts.jpg (2654x2436, 1.75M)

First ever build. r8

Attached: Gutz.jpg (2000x2499, 1.41M)

Looks nice.

Attached: toaster2019_small.jpg (1736x1716, 1.63M)

>radeon 7
I bet it uses a AMD CPU too? Ironic costing 3600 when a used Xeon or 7th gen Intel bundled with a 1080 Ti (that can all be had under 1000 bucks now) will beat it...

You ever take it off any sweet jumps?

>intel
yes I too enjoy my 30+ mitigations
fair point on the gpu

Yeah but that's not really an argument, if it's a workstation, you won't be browsing the web on it and if it's a gaming machine, any patches are even more useless. Might as well not use the speedhole patches in these cases and get the performance.
Unless you're one of those dips that think that only plugging in a cable will result in total viral and malware meltdown, which is untrue.

yeah I'm just gonna run my pc on 24/7 without everything patched

As long as you're not coming to contact with any exploits, not really a problem, yeah. If you do, you're probably dumb enough to get infected with the patches or on AMD too.
I.e. downloading non-trusted shit or browsing shady websites.

I'd rather not have the risk of any 0 day explots

Surprised my first aio didnt shit the bed yet for 5 years.

Might get one of those thick and meaty big boi air coolers on my 13th wagepay. im eyeing on cryorig r1 or the d15

Attached: 20190917_200136.jpg (4608x3456, 1.92M)

What I mean is, it doesn't matter if it's even zero day, if you get into contact with content that can have exploits, the overall risk is pretty much the same. Intel or not.
I'm not excusing Intel trading speed for security though, that's on them and it's good they are getting their name ruined with the backslash.

Get a M.2 heatsink, please.

What used xeon can match 3600 in p/p?

=)

Attached: 2019-09-17 14.14.42.jpg (2000x1500, 344K)

i really hope that trap is not standing on your gpu 24/7 unless you want her dick to stop being the only thing inside that case that's sagging

Attached: 2304983675S.jpg (1920x1227, 1.41M)

>non-k i7
>OC board
>slow RAM
What the fuck are you doing?!

The GPUs are supported though

Had to buy parts from a single brick and mortar in a limited time, the price was good though.

Soft tubing looks so bad.

Is the psu fan pointed up? Might want to try flipping it around and see if it helps with the gpu temps

>caring about looks
Lol

3900x
ws x570 pro

Attached: IMG_20190915_111904 - Copy.jpg (1600x1200, 367K)

...

What case is that?

Great motherboard desu. How did you update the BIOS?

Shut the fuck up retard

^
>typical ad hominem mouth breather

your case and GPU are not good compatible in terms of good cooling.
Your GPU should have at least 2 slots of freespace below it to draw in air.
Your current setup is choking the GPU.

what case?

Attached: peak performance.jpg (1309x1077, 551K)

Back to plebbit

That's really nice and looks great! Well done!
Post more angles!

kek

>5 intake fans, all pulling hot air from radiators into case
>1 exhaust
I'm starting to see why you spent so much on it.

step away, plebs
>rear fan is now intake
>third radiator fan is now exhaust
I will get 3 estra fans for push/pull

Attached: R6 guts.jpg (3878x3024, 2.39M)

We call them "more money than sense" in the trade.

Could have easily gone with only one radiator and 3 intake in front, 1 in the bottom, 3 exhaust on top, 1 in the back with positive case pressure, with bigger reservoir and gotten better temps, but nope.

>using the chipset PCIe slot for your main GPU
Brilliant

I haven't bothered to do that, even though I do recognize the issue. I had to modify one of the fans to allow clearance for one of the motherboard heatsinks.

>Rx580 nitro
Enjoy your hearing loss

the Nitro is literally best AIB version of this card, I've owned it and it is whisper-quiet, the fuck are you smoking

Based

it's too big 4u. I will get a extension cable soon, but there is nothing wrong with gpu on the pcie3.

Corsair SPEC-02 Redshift
(Because the 3 fans it comes with have red LED's you can't shut off)
After I bought it, instead of returning it I just though 'what the hell' and did LEDs around the damn thing because I've never done the LED thing before. I actually like the blue/green setting.

Attached: Comp-2.jpg (2016x1512, 2M)

Attached: 10.jpg (1200x800, 170K)

whoa there buddy clam the fuck down

Attached: kbHbbMj.jpg (700x900, 137K)

What about yellow leds though?

That's not funny, my brother died that way.

Attached: Capture+_2019-09-18-00-12-53.png (1071x1042, 1.82M)

A based user unfucked my image orientation. I'm tempted to try and stick an NVMe in this thing, anyone have experience doing that on X58? Not looking to boot, just wanted more storage.

Attached: x58 guts.jpg (3024x4032, 1.78M)

>That wireless card on 1st pci slot
Does that actually work?