Canada General

There's apparently hundreds who get rejected every year. rcmp-grc.gc.ca/en/2016-commissioner-firearms-report#a5_1

>fugly tacticool stock version
So close yet so far.

Honestly, that's the only reason I haven't bought it. Not sure how easy it is to acquire just the wooden stock.

>Length of pull adjustment is bad

Attached: pqafkb6d9ba01[1].jpg (645x729, 49K)

Every time people talk about VZs I'll say buy used. You can find them for 1000-1200 shipped, no taxes, extra mags, stocks, railed handguards, optics, enhanced controls. Round count probably under 1k and for sure under 5k because nobody shoots that much. Not that the guns wear out with use anyhow.

Sorry about your lack of taste.
Every time I think of doing that and check CGN it's always a bubba'd into oblivion piece of shit he's trying to sell for about 2 fucking grand

Oy, M8, You go a permit for that M8!

>MFW I bought 2 off Tenda and got a "Tactical backpack" from them for free.

I fucking love them and they ship via Canpar so you won't have to deal with Canada Post's strike.

Anybody looking forward to LARPing in the woods in the winter time at night? I can't fucking wait!!!

Attached: 1540582016764.png (1280x824, 1.13M)

Yeah, then I threatened legal action and they changed their minds real quick.

I see lots of that on the EE, but in the last week I've also seen stock configuration with two mags for 950 shipped, and plenty with mag adapters and other good accessories for 1200 or less. They don't last but I see them often enough. I have one in 7.62 and I've seen some in 5.56 at such good prices that I still considered it.

story

SHoulda' got an ACR though the lack of spare parts fucking sucks ass.

Attached: 1537728600042.jpg (1932x2576, 545K)

Just buy some famalam
sciencecompany.com/Petroleum-Ether-500mL-35-60C-ACS-Ligroin-P16908.aspx

I'm still holding off for a NR Not-AR. the ACR wouldn't satisfy me, too much proprietary shit.

Has anyone had problems with a canuck defender shotgun? Mine sometimes hangs up when feeding, and I need to push the pump forwards again to feed the shell.

Discriminated based on physical disability. The two guys responsible for denying my application no longer work there (One fired, one "retired") and they're supposed to include teaching their employees what "duty to accommodate" means from now on. Could have gone for a cash payout, but that'd just come out of tax dollars anyway, so I figured getting my license and making it less likely for others to deal with this kind of bullshit was better.

I've had the mag empty itself into the receiver when reloading one or two times but that's it

What kind of disability user? if you don't mind sharing

How would they even know that you're physically disabled based on nothing but information written in the application?

www.bullseyelondon.com/mossberg-590a1-14-police-shotgun-12-gauge-bead-sight-synthetic-stock-cyl-bore-51681-canada.html

Buy this and import a shockwave grip

This loading gate/lever is slightly crooked. I suspect that might be why.

Attached: 20181104_125722~2.jpg (2471x4160, 1.42M)

Poor eyesight.
The mediator's reaction when I showed them my C(R)FSC test results with 100% was pretty funny, considering they were claiming that I was somehow a danger to public safety because of it. LEL.

It was actually the picture they objected to. My glasses were 3 spooky for photo ID, even though all my photo ID had the same glasses. Including the ID I used IN THE APPLICATION ITSELF.

The two aforementioned guys were dolts.

Drafter is that you?

Wouldn't that be caused by an overly sensitive or faulty shell stopper?

post glasses

If I buy Pmags from Aztech, how do they pin them?

>Only via UPS Ground - Lower
48 U.S. states only.
Sorry, No longer shipped
to Canada.

Also it's cheaper to make than to buy especially cos it's components aren't themselves controlled, nor hazardous at all and commonly used. voyageursoapandcandle.com/products/sodium-benzoate-preservative

They literally write down what they do on their website. An internal block.

>An internal block.
what the fuck is that

Really? Can you not figure it out? It's exactly what it sounds like.

describe its permanence

They are literally just prescription shades, user.

so they got mad because you looked too fly in a pair of aviators or something?

>he can't smuggle shit
Alternatively just get it in Canada
ca.hach.com/benzene-acs-4l/product?id=14533953419&callback=qs

Mine were just wooden dowels put inside the mag

so it stops the follower at the correct count, but drops out when you remove the floorplate?

Haha, maybe.

>physical disability
Expecting something horrifying like your heart is in your asshole
>I wear glasses

That mindset actually leads to a lot of problems. Many health problems are not visible from the outside.

>your heart is in your asshole
Maximum twerkability

>tfw they sell Mossberg FLEX shotguns everywhere but no-one sells the FLEX parts

I've only seen the FLEX pistol grip.
Oh boy, I sure do want to pay extra for a less useful shotgun.

Are you a fucking idiot?

I got one because I wanted to be able to quickly swap between the regular stock and the short youth stock. Then I couldn't find the youth stock anywhere and didn't feel like paying extra importing it. Also, the FLEX forend is wobbly compared to a regular Mossberg 500 forend (which is wobbly enough). So, no more 500 FLEX for me.

I've seen the pistol grip and the tactical/AR-style stock. The hardest thing to find is actually the regular/fudd-style stock & forend. It's even harder if you want it to be black (ie. not MOSSY OAK™).

Either way, it's a moot point. It's technically more cost-effective to buy a hunting shotgun and a tactical shotgun separately.

The REAL crime is that you can't find Mossberg FLEX MVP rifles anywhere. It's not just for the 500 Shotgun.

What's the license used on FLEX? Can other manufacturers make FLEX components?

sure. now you answer the question?

I don't think they can, but even if they could, there's already a much bigger aftermarket scene for regular, non-FLEX Mossberg shotguns.

Can you post your parts list? I just got a Stag-10 and don't know what accessories I want to use with it yet.

How do I become... Hardcore

Start by turning 18

Your name needs to be Henry

What year did this incident took place in?

1562 in Yellowknife.

What's your major malfunction and what was the lay out amount? Pretty ducking stupid to deny the application for that reason, for all the know you're buying it for finger-fucking reasons.

>The two guys responsible for denying my application no longer work there (One fired, one "retired")
>they're supposed to include teaching their employees what "duty to accommodate" means from now
Did the call representative told you this?

You can get 80 percent lowers with no PAL now?

Attached: received_2143825729212976.jpg (1080x1920, 115K)

Pretty much this plus a BCM mod 3 grip to replace the garbage the receiver comes with.

mock up made using ar15.com/gunstruction/ accurate more in appearance than actual parts list. scope is what i'll rip off my AR for the short term while I decide what I want on the Stag long term.

Attached: leaf 308.png (1437x1015, 531K)

up to date pricing in case you hate money

Attached: rip wallet.png (642x248, 16K)

How about you read the fucking replies before asking questions

A lot of product descriptions on sites can be outdated/irrelevant.

I mean, a lot of them are cut-and-paste from other sources. I see handguns being advertised as "CCW/Self-Defense ready" or shotguns sold as "great for Home Defense," despite the fact both of these are an impossibility in Canada. They're just direct rips from the manufacturer's site.

God, I fucking love Excel for some reason.

Any hope we get SCRs here?

theres an 8 missing from the 80% there user, but i think in burgerland they call these 30% lowers. they will not fit in an 80% jig and require much more work to finish. the hardest part would be the small detent holes

He doesn't say the amount offered and doesn't specify his physical disability so neck yourself you dog-fucker.

>doesn't specify his physical disability
Yes he does you illiterate nigger.
Several times.

Who here /lever/?

Attached: 20181104_185603.jpg (2160x2160, 2.48M)

My aim is to own one of every action.

>lever
>bolt
>pump
>break
>semi-auto

only one of those is under the scope of Liberals to get banned, prioritize accordingly

anyone here have a type 81 with little wittle 5/10 round magazines?

Attached: 1537140858104.jpg (2048x1536, 1.4M)

Like this?

Attached: T81AKmag.jpg (3264x2448, 781K)

cute

What is the likelihood of them actually being banned?

How long do you guys think till I'll get my PAL mailed back. Just got issued Friday. I hope this Canada Post shit doesn't fuck me in the ass too hard

Flat out blanket ban and grandfather treatment? low.
Reclassed from NR to R? slightly higher
Remaining NR but becoming pseudo-R because of Bill C-71? that's a given.

>pseudo-R
What the fuck does that even mean

is that yours? Wondering where to get a shorty mag like that, I understand it must be for AK and then modded for T81.

gun registry created via point of sale info logs

I bough the mag years ago from some US dealer. It was a 10 round with extended follower for blocking to 5 rounds for hunting.
Ground the back and front to fit the 81.

>point of sale info logs
aka shit that's been around for a fucking century

a bit more formalized now as far as submission of information to RCMP. Also required for transactions between individuals.

Took mine about 1.5 - 2 weeks to reach my house from when they said it was approved on the site.

Talk me out of buying a Gen 5 Glock 17,Canadian 19, or a G19x.

I know I can get just as good if not better polymer 9's for the same price or less, but god damn I love how they look with a flashlight.

Held off them for a while because I didn't like the feel of the finger groove grip of the Gen 4s, but now might be the time to put a massive dent in my 9mm stockpile.

Attached: CompactWood-705x519[1].jpg (705x519, 98K)

>for the same price or less
that's where you're wrong lol. there's nothing out there that can compete with the build durability/longevity and aftermarket of 9mm glocks.

I hate the trigger though. makes me want to throw the gun in the garbage and stick to my CZ 75. that's a striker fire issue and not a glock issue though.

Are you suggesting heart in ass is visible from the outside?

I wouldn’t trust a VZ off of CGN, a lot are past their warranty and are shitily moded. The typical add is yeah it’s 6 years old and had 2k rounds through it, maybe it was corrosive idk but I won’t tske less than $1300 I know what I got!

you'll shoot your nuts off

>mfw 3k and some of that looks like it's prices before tax
and don't forget, you will inevitably get a Geissele trigger or something similar, so add that too

also, why the fuck is some no-name syrup barrel this expensive?

Attached: fuck.gif (200x267, 858K)

>prices before tax
It's all after tax and shipping
>Geissele trigger
literally reading my mind
>no-name syrup barrel
Maple ridge is somewhat known now. That AR10 barrel has the right specifications to be great. their run of similar spec AR15 barrels have favourable reviews on CGN.

buy it, faggot
get a Gen 4 with a leaf though, Gen 5 has some retarded features and 19x is a meme, you might as well get 17 if you are going for that one.

Glock prices are better than they've ever been and it's still the most reliable and the most after-market friendly platform in pistols, it's like the AR of handguns, famalam, you better get it. Yeah, there are pistols that feel better, have better trigger or are marginally more accurate, but Glock is the goldie locks of handguns, and unless you just dislike polymer frame in general and must have metal, you have no reason not to get it.

Attached: glock operator.jpg (800x560, 81K)

>after tax
ah, when I saw things listed at "150" and one at "29.64" I assumed it was before tax
>reading my mind
lol, not so hard, considering you are not cheaping out and getting their charging handle, there is no way you aren't getting the trigger as well
>barrel is fine
alright, just a bit surprised at the price, since it's probably comparable to like 20" Faxon, and they're a brand name. I don't know shit about Maple Ridge, so can't really badmouth them or praise them. who even sells it, where can I look at specs and any other info?