>fall for glock meme >install ghost trigger connector >it won’t fucking fire > disassemble, bend connector, reassemble >still won’t fucking fire >do this at least 7 times >same ducking problem
Fuck glock and fuck you for liking them. What the fuck do I do but reinstall original connector?
It won't fire because your an idiot, nothing wrong w/the gun besides it's owner
Tyler Gomez
Is the connector just floating too far out? I’m getting fucking pissed off cuz of the trigger can’t be pulled getting the slide off is a pain in the ass niggas
>buy gun >before doing anything try fucking with the mechanics >fuck up a trigger job >blame gun Seems like Jow Forums logic.
Chase Clark
Which ghost connector? Is it by any chance one of the ones where you have to file down the overtravel stop until it fires?
Anyway, if you have the mechanical ability of a coon, you should be able to assemble it with the slide cover plate off, look inside while you pull the trigger, and see exactly why it isn't firing. Then fix whatever's wrong.
Lucas Wright
>mods shitgun Glawk >fucks it up >shitposts on Jow Forums so other polyfags can cry with user This is why non complicated SAO is the only way to go
Dylan Nguyen
>problem with aftermarket accessory >blame gun I hate glocks too but literally kys
Jacob Evans
That is sticking out too far. It should still function, it'll just be super draggy.
First find the actual problem; once you're done with that, you can worry about tweaking that bend back to how it should be.
Kevin Young
Get one of these, it'll fix your fucked up connector that keeps rebounding.
>same size Do you know what a glock connector even is? They don't come in different sizes. Different angles and shapes, but not different sizes.
Henry Johnson
I have, down from 6lbs to 3.5, stock trigger, because on an SAO reducing friction on the action parts decreases pull, not fucking changing with a billion miniature components
Jose Barnes
Why would they not just sell a finished product? This is bs lmao
Jonathan Young
> have to manually adjust finger springs and guess >stoning Your lying or an old as fuck pro gunsmith. One seems more likley then the other.
Samuel Young
They sell both. You can buy drop-ins and you can buy ones that need to be fitted to eliminate all the trigger over travel. That one is the latter.
Connor Gonzalez
Not lying. First rule of ANY new gun is strip it and sand any rubbing or sliding parts with 400grit to reduce friction.
Sebastian Sanchez
They do sell finished products -- but you can't reduce overtravel much with a drop-in product, because of the combined tolerances on all the other parts.
They also sell products with some fitting required, which will give a nicer end result, but takes more work. One fitted to one gun may have excessive overtravel, or not fire at all, when put in another gun -- so they supply it long, and you adjust it to fit. If you didn't wanna do that work, should've got a drop-in connector instead.
Jason Bennett
The other big thing for 1911 is removing that fucking stupid series 80 safety system. Takes a whole pound out
Adrian Watson
That's not how a 1911 trigger job is done retard.
Bentley Long
maximum over fuddlore.
Nathan Lee
AAAAAAAAAAAAHAHAHAHA!!!! Maybe read the directions. I can see what's wrong.
Angel Bell
Shows how much you know. Have fun paying $100 for a drop in that is a waste.
Luis Allen
maybe you should get someone who knows what they're fucking doing to install something in your gun, moron. You clearly do not.
Zachary Myers
>>"buy a pistol that isn't shit" >>proceeds to buy not one, but two shit pistols getaloadofthisguy.jpg
Alexander Watson
>glawk fans doing drop ins and calling it gunsmithing
Luis Ward
The fuck are you talking about? Go to YouTube right now and Google 1911 trigger job. You're talking about expediting the break in. 1911 trigger jobs are difficult as fuck and easy to fuck up, or end up with a 2oz trigger.
this is bad advice, unironically never do this. this is worse than fuddlore, it's bubba tier shit.
Anthony Ward
A trigger job, on any gun, requires sanding and polishing surfaces to reduce friction, between the sear, disconnected, and hammer as well as the slide/bolt.
Landon Sullivan
Damn dude anything in here I could use to file trim fucking thing down lmao?
It's amazing to see how many dumbfucks are still lurking on Jow Forums. Go back to circle jerking to your salient glocks. You clearly dont know Jack shit about real traditional gunsmithing.
Gabriel Cooper
But what effects weight the most in a 1911 are the springs you fucking mongoloid no guns.
Dylan Gray
It is retarded. Any benefit doing that with sandpaper the gun will do its self withing 100 rounds or so. Hell just cycling and dry fitting will smooth it out. Doing it with an abrasive only increases the chance of taking too much material off and fucking your gun. You'd know this if you had a firearm.
Brandon Garcia
>buy the most reliable handgun in the world >take it apart and remove necessary pieces >put in other shit >get mad at others when the gun no longer works >continue to be a butthurt retard
Yeah the sear, disconnector, and trigger spring, but friction caused by machining practices, and coatings on parts by manufacturers also need to be smoothed out. Springs get broke in over time just like moving parts, the difference is springs do not experience friction.
Can your autistic nogun ass trip so we can hide the liquid shit frothing from your mouth translated to text?
Jordan Gomez
>buy a Ghost product that explicitly states it needs filing for proper installation >"WTF Y THIS NO FIT!?" Just keep your piece stock for your own fucking safety.
This. Glocks are fine but didnt that guy blow his nut off appendix carrying cause he put an aftermarket trigger on it?
Tyler Martin
Iunno, I rocked a basic 3.5 kit in my G19 for a while and don't think it'd be too prone to going off by giving off a strong fart. Granted I'm back to a heavier pull now because I put the standard firing pin spring back in because Fiocchi was giving me light primer strikes out the asshole.
Lincoln Fisher
>carrying a striker fired pistol with a 3.5 lb trigger Fucktard
Michael Diaz
>didnt that guy blow his nut off appendix carrying cause he put an aftermarket trigger on it you have me rethinking my plans of fucking with the stock trigger now
Eh, you might be able to clip it with your needle-nose pliers, but more likely you'll just mangle it. (And wreck the pliers permanently, of course -- they're made for cutting copper wire, maybe soft steel, but not stainless.)
Fortunately, it's never a bad time to invest in tools; get yourself a dremel or such. Or just buy a drop-in one, and sell the Rocket to a friend with the tools and inclination to install it.
Julian Lee
You sure make a lot of references to your ass
Zachary Lewis
>im a retard and its your fault
Christopher Nelson
How the fuck do you fuck up working on a glock?
Bentley James
This
Christian White
>buy a working pistol >fuck it up by doing something you didn't know how to do >"fuck glock" sub room temperature IQ my guy
Anthony Long
You are retarded and shouldn't be working on your gun if you don't have any skills it's not the guns fault you are mechanically stupid.Buy a 1911
Nolan Ross
It's good advice for a cheap and rough gun like a Rossi.
Cameron Allen
>buys a meme and SQUISHY SQUISHY
you could have had an actually good gun and ammo and mags...instead you bought trash...
Ayden Powell
Squish was only one production run, the rest of the FNX pistols are fine.
The Five Seven is fucking retarded though.
Jordan Wood
>i bent a part >it no work reee amirite? >definitely objects fault i did nothing wrong
Benjamin Allen
>fucked with a gun >fucked up >blame gun
you're a faggot
Brayden Rivera
Lol Glocks are conplete shit Literally worthless, over priced pieces of shit. Smith and Wesson M&P series and shields are much better than the glock series. I had to order 20 fucking zev pistols the gen 5 glocks for a training event with some football players. 5 couldnt shoot rounds with the suppressors, one trigger broke and all had at leasr one failure to feed due to lack of gas blowback to cycle the round and push the slide back fully.
FNX45 has a numb trigger bucko I'd rather get a G21.
Xavier Cox
are people this fucking triggered from a factory glock trigger?
Sebastian Harris
>put incompatible shit on a weapon >wtf it no work wepon sukz reeee Stop being retarded and learn how the pistol works. Sticking out too far you wigger.
Kayden Myers
There's this rampant retarded belief, especially on the internet, that all guns must be upgraded from their stock configuration so they are "good enough". It comes from being told to spend money on products by keyboard experts. Personally, I think that all this upgrading is a waste of time and money because the one thing that doesn't change with buying more shit to tack on to your gun is YOU. You, the shooter, have not improved whatsoever.
Go out and git gud before you upgrade. The more money you spend on aftermarket crap is less money you can spend on ammo.
>friction caused by machining practices you don't know shit about machining. I've been a machinist for 6 years and you don't fix surface finish by sanding or stoning because that will butt fuck your geometry and scrap the part. if you can feel a burr with your fingernail, stone it lightly just until the burr is gone. the object is to DEBURR without altering any surfaces. this fucking "hurr durr sand down all your parts because you know better than the people who make guns for a living" is how you get unsafe non functional guns.
Owen Perez
>Fucking glock sucks b/c the aftermarket part I bought is shit and doesn't work!!!!