POST DIY WEAPONS PLANS

It's really nice
I hope I could build a rifle as well but were I live we are only allowed to have shotguns

Bolts and pipes. Want to get back to this with a 12 gauge to 38 special adapter for a bolt action carbine.

Attached: 20180626_170441.jpg (2560x1440, 1.44M)

Nice
I'm now trying to make plans for a full auto 410 sbs but there are a lot of mechanical issues to be solved yet and I also have to find a way to make a proper barrel

That's intended to be a shotgun too. Made from 3/4 inch pipe. More 3d sketching that a prototype. Just never saw any good "hardware store" bolt actions. Lets be honest. Still haven't. But it was time well spent in a shop with trash. Still think there is a secret sauce with plumbing pipe and caliber adapters Luty would be proud of.

The most important thing is to make sure it shoots and that it won't explode in your face. Looks doesn't matter. Just remember two things when building homemade stuff. First don't try to improve something that already works fine and second don't expect it to work from the first time. That's what my experience has taught me.

welded this thing together once, also ammo is self made. primer is armstrong mix, propellant matchhead powder. 0.4 gramm of propellant are good for about 10 gramm of shot, its not rocketscience. Im only testing a primer in vid related

Attached: my-hobo-revolver.webm (480x856, 1.64M)

Really nice!

Attached: 1451337244912.jpg (1024x683, 63K)

haha thx, first gun was a slamfire pipe gun with an screwable "firing pin" so to say, in case ammo gets stuck i can unscrew it and clean the pipe. Same ammo. for the revolver i can use the axis as an ejector since its 7 same sized pipes welded together. Its probably not a revolver but a pepperbox (actual pepperboxes are rotated and single fire, not like volleyguns) took some figuering out until i got it right. wanted to make a barrelbreak revolver first, but researching ammo made me realise its safer for me not to have a barrel behind the cylinder since i could get chainfires with this ammo, you can see sparks going everywhere.

>built in layers like a masterlock
How is that better than using a pipe?

My bad I was responding to the wrong comment. That was in regards to the bolt action pics. When it comes to the twist snap shotgun its about as safe as it can get. Double wall black pipe (barrel + receiver), carriage nut pressed into pipe used for shoulder stock. Recoil drives straight back into the stock. A solid steel bolt with a firing pin brazed on for a breech face and a steel bolt straight through everything locking it all with the handle. No pipe thread cap BS here! There is not much that can go wrong with it. The twist snap even lets you move it around loaded with confidence it wont go off if its bumped.

Hard to cram a reciever, magwell and trigger system in a pipe alone. A layered bolt together receiver can be built layer by layer with handtools. The idea is no weld or lathe needed design. There is an AR design already out, can even be 3d printed. Lower calibers need some attention too.

its only better cause this guy doesnt have a access to real metal supply or tools so hes making do with some random thin piece of scrap.
even his reasoning is questionable oh you cant fit all that in a pipe. why not? different size pipes exist. just buy a bigger pipe.

All you need is sheet metal

Attached: 1552337360350m.jpg (1024x985, 48K)

youtube.com/watch?v=rmQFcVR6vEs

DIY weapons made from scratch are interesting shit to see how resourceful people can be.

But unless you are desperate to have gun to hunt for food or something, I wouldn't recommend actually doing anything more sophisticated than i.e. single shot shotgun from really thick walled plumbing pipe.

Guns are not watches or pens, if something goes wrong it is likely to go boom in users hands. And hospital staff is required to report things like that.

Ok if you have proper knowledge, skills, tools and materials, but it's not really DIY at that point.

Anyone know how to engrave guns DIY?

Attached: backplate_1024x1024.jpg (1024x1024, 124K)

Were they moving the laser etcher by hand or some shit?

Attached: 1539465549859.png (566x359, 282K)

I don't have access to real ammo (i still live with family) so this guns are straight up primitive. I use black powder loads and a fuse to ignite then (even if i'm build something that uses primers rn

Attached: Screenshot_2019-05-10-01-32-34~2.png (1440x704, 1.61M)

Got a video of one of the guns, the caliber is approx. 7.65: youtu.be/BPDpC5BBD7M

get a dremel and mark out what you want with sharpie, the cut it, even with no practice you could do better than that

Why not drive to walmart and but shotgun shells?
underage?

Nope, just italian lmao

You can't buy ammo if you don't have a licence

It's made of shotguns, silly.

Attached: juice can shoot.jpg (1500x367, 178K)

Its good for what you wanted, creativity with what little you have on hand will get you far.

Attached: 1554612262390.jpg (800x1130, 261K)

why isn't topless rangetime a porn genre? Take the women out of those odd "wrestling" lesbian bdsm videos, give them some training and make it a competition to get best score, then the obligatory porn.

It looks way shittier at that resolution. Even knowing what it is supposed to look like, I still can't help but see certain parts as just really shittily-done. The manky-ass words don't help.

Attached: OpLVNKUM_o.png (1163x589, 785K)

I’ve always wanted to build something pic related.
That collapses for storage.

Attached: 41948F42-D805-4548-9CD2-1E17948100F3.jpg (450x317, 65K)

Do you have a diagram of that action (or how the receiver/barrel mesh)?

Its a 4 winds slambang shotgun.
Hes just got some aditional furniture and a ring to stop over insertion. Well not stop but it has to be in a certain orientation to fully slam.

You can. Just buy pic related and an airsoft fmg9.

FUCK

Attached: 46866.jpg (500x500, 23K)

based spaghettibro, may AISI niggers never catch you

If you can't buy ammo you can also try making one of pic related. I never tried it because I can't find black powder anywhere but it looks like it should work.

Attached: 1555220085156.jpg (1071x5782, 963K)

You just made me paranoid

When i go to work i'll show some sketches of three rifles that in paper should work, if interested

well it's not like this isn't just a LARP, right? : ^)
besides, I'm sure you already know how to deal with glowniggers, so it's only as much of a problem as you let it be

youtube.com/watch?v=R_l_-_AwvBY

This is the first thing I thought of when I saw that pic. Totally worth the cop a feel.

It is just a LARP, yeah

Also muzzleloaders are clear to buy without a licence here, so

>also muzzleloaders are clear to buy without a license here
nope, you need a loicense for antiques as well
ffs you need one for swords and shit if they are not just wallhangers
t. another italian

Well shit then i'll just get a licence this summer

god youre a fucking pussy. Are you gonna go into a rant about how "only properly trained personel should be allowed to carry guns!'
Let me ask you a simple question you dickless fuck, how precisely do you think the inventors of firearms were trained in gunsmithing? I bet it was the same instructor who taught steve wozniak how to build a PC. People like you are the opposite of innovation and invention

>jews can shoot
>doing everything in thier collective power to make sure nobody else can

>still working on the details
My faith in you guys to make anything at all has gone down to nothing over the years.

Please, please someone impress me, even a little.

Where's this from?

user, I know Jow Forums is fun and all, but stop falling for the propaganda.

Not him but I wish it was just propoganda

>damage control time

Attached: d5c.jpg (600x737, 75K)

So tell me does HK sell their unique guns for civilian use like IWI? Or do they just sell their pistols and ARs? I'd think that'd be the people secretly against citizens having guns.

Is this a joke

t.

Attached: Not FBI.jpg (311x406, 18K)

So long as IWI sells their Tavor and HK doesn't sell their G36 I'm right and you're wrong user :)

I've had a few things tinkering around. This is a simplified STEN pistol, with a wooden lower and pinned in barrel AK style.

The bolt might be the hard part to design because of it being blowback, but I'm sure there are real world illustrations that can be found.

Also, the ejector would be screwed in like on a Moseberg 500, or maybe an 870.

Attached: Simplified closed bolt.png (1064x1074, 270K)

2/?

Locking breech 5.56. The picture is self-explanitory. Bolt handle locks into a recess in the upper. The spring might need to be in the rear of the receiver, though. And also figuring out a proper side plate to coordinate the bolt throw.

Attached: locking carbine.png (1142x984, 444K)

3/3
This one is my favorite and the one I'm spending the most time to perfect.

Blowback STG. Just the STEN pistol, but scaled up. And the weight of the bolt can be used for both 7.92x33 and 30 carbine.

Attached: stg.png (1500x1388, 647K)

As a bonus, a 3-barrel pistol design. Taken straight from the Improvised Munitions Handbook. Chambered in 22 LR or possibly 25 acp.

The problem might be the trigger mechanism, but you could use hooks from a door lock for this one.

Attached: 3 barreled pistol.png (652x489, 6K)

oh shit I spilled something

Attached: ATF9.jpg (1988x1390, 371K)

Salve, my fellow hobbyist!

I had the same problem when I was underage. The only alternatives I can think of is powder from blanks (higher pressure level, so be careful) or ground up matches mixed with the striker compound (but not ground all at once, it will explode on you)

I mean, black powder is basically part fuel (charcoal), part high-explosive (sulfur), and part low explosive (saltpeter / potassium nitrate)

sulfur isn't even an essential part for black powder as long as you can figure out a reliable ignition method, which makes sourcing the stuff even easier

Hey! Thanks for the tips!
Armstrong loads are a thing i'm working on, but i didn't even considered blanks to be an alternative until now.
I'm also thinking about a caplock with homemade percussion caps, that would be more fun to use than a fuse as ignition method.

Also what are you thinking about a caplock falling block rifle?

>It's not rocket science
Ammunition literally is.

I don't have much information on falling blocks, but I think it can be done if the space between parts is as airtight as possible. And with a way to lock the lever in place, like on a Sharps rifle or a Winchester 1895.

As for musket caps, I've heard about guys using soda can material and putting a toy cap on it (if you have access to Strike anywhere matches, the white compound is a decent substitute). You can also just use the cap itself, if it's a cupped type that goes on a toy revolver. But the primers are corrosive, as a word of caution.

Not him, but I can agree with that. Especially if you're wanting to fabricate bottlenecked casings. And don't get me started on magazines.

If you can easily obtain blanks, just use the blank cartridge case and primer as-is. Take the blank powder out and replace with black or armstrong. Either seat the bullet in the case (restricts you to same caliber) or just push a wad in to keep the powder charge in place, and load the bullet and charged case separately. Possible to have a large bore and small chamber -- muzzle-load the bullet/shot, breech-load the propellant charge.
Or a small bore and large chamber -- you'll need a tool to seat the bullet through the chamber into the barrel throat, then chamber the propellant charge behind it.

I would use a magnet to lock the lever, and i would use probably a firecracker, to stay light on pressure

ITT
Jow Forumsomando meme magic

I think I'm seeing what you mean. Kind of like a gallery load or 22 CB. That wouldn't be too bad of an idea.

Also, if we're talking about a caplock, I don't think the block would need to be under much pressure because the end of the barrel pretty much seals it up as is, with the exception of maybe some slight gas let-off softly blowing at you (hence the falling block part, and not a 100% inline gun).

That's the main thing to not have access to actual ammo. You need to be a lot more creative with the designs

One idea I found was that 1/2" inch pipe can actually accommodate a 28 gauge shell with slight reaming of the chamber. Almost a better chamber seal than 3/4" pipe to 12 gauge.

And the recoil of a 28 gauge is somewhat similar to a 30-30 Winchester (10-12 ft/lbs of recoil)

I hear you on that one. I'm the user who mentions Volkssturm guns from time-to-time. Making something tangible from nothing has always been a great passion of mine.

Attached: 72017721169729489643.jpg (840x560, 41K)

I feel you, based crafty user

>never again
>as if it happened at all

>Jews being more concerned about making money than Germs
hmmm

Israel was a mistake

Attached: 25e.gif (2000x1153, 365K)

Here man use my paper towel

Attached: 1538551889826.png (1636x1491, 3M)

Not the same person nor is that an argument. Enjoy repo and pre ban HK firearms because they're afraid US citizens will give them a bad name if a G3, G36 or anything not an AR or pistol is ever used in a shooting.

You anons don't understand how these design concepts work

There's a thread about it on the WeaponsGuild forum.

I will, thanks.

Attached: ,1.jpg (608x960, 119K)

I just finished remaking my pistol. Not sure if I will put a trigger guard or not. What do you think

Forgot the pic. I'm fucking stupid

Attached: _20190510_224403.jpg (3792x3316, 1.81M)

Does it use a weighted linear hammer? Looks neat.

It's hammer fired and uses a standard AR15 trigger group.

Attached: 241573AD-40FC-4CEE-99A1-B461054ABB2C_zpsa2elfkld.jpg (1024x768, 102K)

I need more info on this
>Deagle mag
>AR trigger pack
What else goes into building one of these?

Gotta reduce production costs

It literally isn't. Projectiles are not rockets.

Baby's first solid rocket fuel is literally black powder, though.

>This is legal under the 1st amendment
this isn't 100% true btw. spreading them outside the US is a crime iirc.

Yes. If you say something like this on the internet and someone in Europe sees it, it gets into problems with import/export laws since it's illegal there.

SHALL
MAKE
NO
LAW