/arg/
AR thread
Bullyzone
Cancer containment
Guys the thread is shit edition
Old
/arg/
AR thread
Bullyzone
Cancer containment
Guys the thread is shit edition
Old
Other urls found in this thread:
lmtdefense.com
lmtdefense.com
twitter.com
AR OWNERS HAVE SMALL PPS
Wilson barrel got sent off for chopping, dimpling, pin/welding, cerakote green
based PSA
no fat sluts allowed ITT
Looks like you will fit in perfectly
>still no TA33
>i spent $250 on a toolcraft bcg
Call me a retard please.
Hah, I don't even own a PPS.
Did he at least give you a reach-around?
It came in a color that tickled my lizard brain. Not my proudest spend.
At least its not a $250 dollar phosphated toolcraft. You could be Matey
Is pretty, but NiB is just as shiny
Chrome master race
How do you pay $250 for phosphate toolcraft?
Nevermind i guess cryptic doesnt charge as much for the phosphate. But thats how
Why would you put additional weight into filling unused mlok slots?
P H O S P H A T E D R A G O N
(Rent Free)
Must fill a slot with something
There isnt an MLOK rail on that picture
You don't, it's about the same price as any other phosphate BCG from a reputable company.
I got an AR today, thanks to the user who gave me the recommendation a week ago.
You can't say something like this and not post ar
same here, picked up a solid rifle for about $500 with all the bells and whistles from radical firearms.
Because the extra grippiness and keeping heat off my hand is worth the 1-2oz at absolute most i added with 3 strips of plastic. Weight optimization is important, but dont get autistic
youre welcome!
Are foregrips a meme? This one sure feels like it.
personal preference. personally, ive gotten rid of all of mine.
What is the top rifles rail then?
Their comfy
Oy vey muy sensitive hands!
This one I bought on eBay is Chinese and feels like shit. Maybe I'll go to my local gun store and just get a Magpul one and see if I like it.
AFGs are superior, because they support the superior and ergodynamically correct 'thumb break' forward grip where your forward support hand has thumb forward along the the bore, with all bones in your arm in a straight line from thumb tip to elbow.
>AFGs are superior
Hahahahahahahahaha
This is some URX 3.1 levels of fuckery
Its slick and can have picatinny sections bolted to it
It ain't much but it's an honest gun. Got it for $470 and when i went to pick it up the guy gave me some good irons for a reduced price.
Gay retard
In the days before keymod/mlok there were a few patterns of bolt on slick rails that came out
I think you meant stubby vfg or handstop. Afg is a trainwreck
Wouldn't mlok be both lighter and have a bigger market for attachments?
that design existed prior to mlok and keymod and shit, kinda like the 3.1
Nope I meant afg, specifically Bufferoni KAG.
Kag is not an afg
How in the name of all that is holy do they justify selling a non-barreled upper for over 1k?
It wont have to be sent back because of issues
>How in the name of all that is holy do they justify selling a non-barreled upper for over 1k?
When your primary source of revenue isn't from individual customers but contracts you can charge whatever the fuck you want, even better if people are willing to still pay that.
Poor excuse for an overpriced meme
>Literally kinesthetic angled grip
What is it then
Feel free to fuck off to rguns or whatever
That should make it less expensive
Buy once, cry once
Is what forward grip should be, more of a handstop
It's an angled grip located forward on the gun. Literally AN afg. Not THE AFG™
Yes but it came out afterwards and the mlok rail wasnt on sale when i bought mine. Given that I already have picatinny accessories, why pay extra for MLOK. Only benefit i would get from MLOK is a slight weight savings
Well... just dont be cursed
Its a handstop cupcake
>justify
Found your problem for you!
The other grip bcm makes is also angled. Don't bring the brace losers grip classification here. They are all grips.
Can someone remind me what the point of an ultralight barrel is, again? I installed a Faxon pencil barrel in my rifle and I literally can't tell the difference in weight between this and a government profile barrel of the same length.
How much does the 5.56 one weigh?
My 16" is about 8 lbs since it has an eotech.
Unless you are doing an ultralight build combining the pencil barrel with other lightweight components it doesn't make much sense.
I want a SBR with a suppressor but I have no idea if that's practical or not. Is it wrong to want to buy a rifle based on looks alone?
Obviously user induced jam.
9lb even
Loaded
>I want a SBR with a suppressor
It is with 300BLK, was pretty much developed specifically for that application.
Friend did a faxon gunner with an MCMR. Handles noticeably better than a standard BCM ELW MCMR upper. Comes in just barely over 6lb and with the heavy stock balancing the rear it feels like a toy.
>I want a SBR with a suppressor but I have no idea if that's practical or not.
Definitely practical. Go 11.5" barrel.
>Is it wrong to want to buy a rifle based on looks alone?
If it is, I don't want to be right.
Did same thing, it's not really that much better than regular rifle, but it's quieter, about a much as unsuppressed 22 from rifle.
That flashlight must be pretty heavy then.
What optic is that?
you wish bb
The single most practical AR setup.
11.5 with a can is peak performance
5.56 also, but it pretty much can’t be less than a 10.5 barrel
Aimpoint CompM5 in Scalarworks mount
Light is a Surefire M600DF in Gear Sector offset mount
NO NO NO
ARG TOLD ME THAT LMT WAS INFALLIBLE
Relax, he's just bluffing.
Lobster tail extractor can't fail.
I smell a psa salesman is behind all of this.
>LMT fags on suicide watch
my psa never did this...
EVERY NOW AND THEN FAILURES AN OPTION ITS NOT A BIG DEAL
You got me
Your rifle cant experience failure if you never shoot it :^)
Has other utility that’s worth it to some people if you have a shorter rifle it’s worth it imo
Anyone interested in a 300blk upper? 8" MCMR, 9" KAK CHF 5R modern profile 17oz 300blk barrel. Bootlet nitride gas block and gas tube. Aero Precision upper.
Will include 200 rounds of factory new S&B 300blk ammo 200 grain subsonic. Asking $550 shipped.
I just finished my 14.5" build using an MCMR and a BCM ELW barrel and it has that wiffle ball bat feeling.
Nice SBR
>Bootlet
t. Bootlet
>I shot 100rds at the range and it was flawless!
>Certainly this means it will be flawless for the next 10k rounds
>PSA confirmed for ultra best reliability
You don't like 300 meme anymore?
I built/bought it specifically for a use case that no longer applies. Had a place to do night shooting but subs only. Now have a place to do night shooting with supers.
I wouldn't mind keeping it, but also want to do other stuff.
>FSB cutout rail
>16" barrel
Jesus Christ that is unfortunate
wow what the fuck
that is one trash looking rifle
>posts an even worse one
my sides
where does this fit? technically not an AR(no buffer tube, similar to an AR-180). pic related, bought her 3? weeks ago
there is literally nothing worse than that thing daniel defense replaced a forged FSB with
it is inarguable
is there a thread going for taiwanese made rifles?
maybe you should make one
What barrel length
PoSt Ar
Trash rifle for a trash thread!
So glad I sold it off
That's a funny way of spelling "Exeter, NH, USA"
every thread is a trash thread
If only you knew how bad things really are