Homemade weapons

There is nothing illegal about manufacturing your own firearms.

what if I manufacture full auto machine guns?

There is nothing unconstitutional about manufacturing machine guns.

what about federal law

You forgot the asterisk that it must not break NFA restrictions so no surpressors, SBRs, MGs, and AOWs to much understanding

A bucket of salt water, a barrel blank with a rifling cathode and some electricity.

Op, if you made That, then hot damn. That is probably the sexiest tube gun ive seen. I'm at full mast right now.

See

w-what

The Constitution of the United States > the United States Code.

wut

You forgot the asterisk that shall not means SHALL NOT

rifling button from aliexpress/wish (or make your own) + hydraulic press

that crack is a bit disconcerting

How about an explanation of how it works?

>*backstabs you*
nothin personel

The hammer(rearmost piece) is pulled back by the trigger putting pressure on the mainspring. As it travels rearward the pawl drags itself backwards with the hammer spinning the striker cylinder clockwise. As the hammer reaches the end of it's stroke the sear releases and the pawl travels along the shallow straight channels back forward

Check out mark serbu's YouTube channel. He has a whole thing on it.

Attached: 1549653207530.jpg (3120x4208, 2.67M)

Where is the trigger my dude?

didn't want to need a trigger warning

>he hasn't figured out the trigger mechanism yet

Attached: 362437486598.jpg (1026x589, 234K)

atf pls go

Attached: CIANiggers.jpg (802x854, 203K)

Mike's work is very inspiring. Someday I'll build a Caselman like his. But for now I'm working on a much simpler and cheaper Casleman. Open bolt, full auto only, and made from mostly off the shelf parts. My last big bore airgun cost a grand but this one should be a few hundred. Unfortunately it's gonna look like ass, as you can see the magazine goes NEXT TO the pistol grip, and the barrel isn't in line with the pistol grip. But once it's build I can mess around with how to move the pistol grip over and put the magazine down the center of it.

Attached: caselman_2019-May-24_01-03-09AM-000_CustomizedView15391398106_jpg.jpg (1349x503, 67K)

It'll be .30 caliber. Runs pretty much like a paintball gun but closer to 100fpe

Pic related is prototype magazine I made last night to feel out the design, made from a beercan, rubber band, and a pencil for a follower. Magazine will probably be the only 3d printed part since bending sheet metal is a pain without proper jigs and dies

Attached: IMG_20190523_212828.jpg (451x601, 78K)

Attached: caselman_2019-May-24_01-22-31AM-000_CustomizedView22076809948_png.png (1349x503, 147K)

Here is Mikes Caselman

Attached: 10153690_10203594045793925_1837628793_n.jpg (720x960, 233K)

Obviously there will be sights/rails on top at some point. For now the cocking handle goes there, lol. Just started teaching myself CAD the other day

Attached: caselman_2019-May-24_01-13-56AM-000_CustomizedView19402919685_png.png (1349x503, 146K)

>Tfw already built one

Attached: IMG_20181225_112637.jpg (3120x4160, 3.52M)

Here's a .30 cal I made a while back

Attached: IMG_20190301_183205.jpg (876x657, 79K)

Please tell me what I'm looking at!
Is it one of those hammerless venturi full auto bb guns?

Does the definition of automatic arms in the NFA also cover stuff like automatic air guns, or even something as exotic as a cartridge containing compressed air with its own round?

Attached: 1554429616547.jpg (486x480, 52K)

Thats the weapon I want my body guards to use when they guard my Brutalist mansion after shtf.

Here's some canucks version

Attached: rsz_20180325_155102-1.jpg (1387x901, 85K)

if memory serves me that thing is hitting at about 32 acp powers

Why is gas powered speculum stuck in the ceiling?

Homemade cyclone .25 fully auto compression gun.
Lead balls float free in chamber to open barrel, compressed air is let in and lead balls fly out at 1600 fps

.22 pellet pistol, fired with no11 caps (or plastic toy caps if you double them up)

Attached: cap_pistol.jpg (310x552, 78K)

Attached: dba64d85bbff1f12947ef6bf69c64983dc1de8a3ee77c21584d5c21ea706b1b0.png (384x500, 187K)

i- is it the no-no kind?

Wow I've never seen one in .25 cal, can you chrony it or is it impossible with the burst of balls ? (lmfao)
Yes, about 130fpe

Heres is another of this thing, I still haven't finished the triggger/sear/bolt, and there still isn't a latching mechanism to hold the action closed, but you can fire it like a zip gun

Attached: IMG_20180426_000609.jpg (310x552, 53K)

By action I meant breech

Attached: IMG_20180420_225734.jpg (982x552, 152K)

I have a high speed cam on my home computer.
Calculated average speed was actually 1539.
It has an insane rof, but due to how it works you get one burst of 60-70 projectiles all at once then have to re-gas it.
Also accuracy and range are shit, it destroys a 3 foot wide area at 15 yards, then loses almost all energy past 50 feet

Seems like it would work, a little prone to not indexing right, I would assume. Also you said the trigger is putting pressure on a spring to cause this to happen? There are some issues with that kind of thing, how are you handling that?

Not airguns, no. I'm not sure about your cartridge idea, though getting enough air in a small space to use it with a normal firearm would be practically impossible.

Making spitzer-balls might help with that, as would rifling.

Why blued steel?
Also, anyone wanna make a homemade stainless pistol like in the OP in 45 super with a 40 OZ tungsten filled bolt or some sort of delayed system and with a buffer tube adapter in the back and then decide they don’t want it and sell it to me?

Is there no mechanism to limit the amount of balls, limit fire rate, etc?

Airguns are completely exempt. Full auto, suppressors, SBR, CC, it's all yours when it's pneumatic. Evanix used to make full auto .30 cal airguns with serious punch. Their new ones are fully air operated rather than solenoid valve fired and as far as I can tell don't have a full auto feature.

It's actually almost kinda almost possible. Doesn't reach real firearm FPE levels but still touches the lethal range. Look up Brocock and Innovairtech, seems like Joerg Sprave (or AEA) have the patents now.

Attached: image.jpg (661x284, 75K)

Which is why I also used to have a spotter

>Joerg having patents on this shit
Well there's a huge surprise and a blast from the past. What's that guy doing with these?

Pic related are .50 cal HPA cartridges, I think they do 400 or 600 fpe, something disgustingly awesome

Attached: mac2.jpg (3264x2448, 1.91M)

So sure you sound and yet.

Attached: Dobric2.jpg (640x480, 122K)

Oh, he's just making the coolest "non-weapon, toy" on the market in Germany, a two shot arrow pistol that does 50fpe and is kinda concealable. Great for places where the government cucks your right to defend yourself. Imagine CC'ing this in San Francisco? A cop would definitely take it, maybe charge you with something and lose.

Attached: 31914135_1678623422225853_4954982784461438976_n.jpg (960x640, 24K)

>FPE cucks
oh no

Joerg doesn't actually hold the patents for Brocock style air cartridges, but he seems to be working with AEA to modify their PCP pepper spray burst pistol into an arrow pistol. From what I can find, AEA also makes high powered airguns for hungting. He also may just be using a third party manufacturer to modify the AEA pistols. Here they are with little broadheads.

Attached: 58654683_2164288306992693_4690394923373953024_n.jpg (960x719, 61K)

That's really gonna fuck you over if it gets confiscated by the police...

Your door lock "bolt" is exactly like my 2nd .22 rifle build ever, when I was 15-16. I found it to be unreliable, and had too many light primer strikes. How did you overcome it? Just a massive spring?

What is that?

Have any of you guys tried to cash in on local gun buy backs? I.e., making a few guns then turning them in for the $50-$150 reward?

Attached: template.png (233x255, 66K)

YASSSS
Can't wait till someone (Innovairtech, AEA, Jeorg?) to mass produce a multi-shot HPA cartridge gun. The revolver prototypes I see around look damn effective. Can't find a pic right now though.

Heres Jeorg Spraves AirRinger going through a leather jacket and thin plywood. In another video the arrows go right through a leather covered ballistics gel block a foot thick. With no broadheads!

Attached: 58667585_2164334120321445_4681908488903852032_n.jpg (960x540, 113K)

Are you new here?

>another one
Holy shit are you new here too?

Attached: 58382777_2164334783654712_5161207795252461568_n.jpg (960x540, 102K)

Yeah I thought about adding "if you get caught alive" but then I realized it's be better as bait if I left that out.

a "Brocock" cartridge. It's a High Pressure Air cylinder and firing valve built into a cartridge. It's a Pre-charged-pneumatic "round"

Brocock or somebody made these cute little keychain pistols you twist to pressurize, they supposedly fire with enormous force and loudness for their size. I can't wait to build one someday.

Attached: KCMs030c.jpg (1840x1380, 305K)

I kinda want one of these just because they look so fucking cool.

Attached: 1545310645432.png (925x919, 714K)

No, I mean that missile thing.

They always accuse you of what they themselves are doing

>ywn build a cannon out of wood to kill t*rks

Attached: 254362.jpg (900x675, 230K)

Not with that attitude you won't

I've been brain storming a semi auto, lever delayed blowback 5.56 rifle made from tube steel, and a couple pieces of bar stock. It's inspired by the Sten/sterling, and it could be made with very simple machine tools. I've worked most of it out, excluding the fcg, which has ironically given me the most trouble. I've even drawn it up in CAD. Maybe one day I'll buy a shitty mill and lathe and actually build it.

schematics pls

I post this with the disclaimer that making this firearm is illegal in most countries with any somewhat functioning economy
thehomegunsmith.com/pdf/Expedient-Homemade-Firearms-Vol-II-PA-Luty.pdf

>inb4 i don't care about laws
It's CYA

Just an afterthought, but the creator of this book is British, and actually went on to create the 9mm version of this firearm on his own. He was arrested for doing it, but the gun worked, so take that as you will.

Attached: file.png (1318x863, 171K)

I'm phone posting right now, so I don't have them. The bolt is basically ripped straight from the sterling, and the lever delay system is a pretty simple concept. It could hopefully be a good design post habbening as an insurgent weapon that is cheap and easy to produce with simple tools.

people still play this shitty game?

You're a fag and you don't belong here.

Tell me about the lever delay

That seems like a fairly well thought out magazine catch system. I like it.

You're describing the Sterling 7.62.

en.wikipedia.org/wiki/Sterling_7.62

Attached: sterling lever delayed prototype.jpg (1017x520, 57K)

Wament holup
1600fps? Proofs?

From the last thread. All three of those are actually powered by black powder with a fuse, bc where i live you can't purchase ammo without a licence. Got a video of one of the pistols if you're interested.

Attached: Screenshot_2019-05-10-01-32-34~2.png (1440x704, 1.61M)

Get a model rocket motor and take the electric match and use it instead.

i wanted to make either this or get some blanks and replace the powder with armstrong mix

Huh. I suppose I am. The design I was brainstorming would be slightly different, probably, but that is basically what I was thinking of; although, mine was going to be closed bolt, which is why the fcg is more difficult to design. I should have known that this wasn't truly an original idea. I wonder how the internals work? I doubt there are any detailed drawings, or even pictures still in existence.

What do you want to know?

>Tfw had friend with open bolt machine guns he always converted
>Tfw he died to a heart attack and his parents found his guns
>Tfw they went to turn them in they got arrested

Never turn in anything.