Disregarding the law edition
What load recipes are you cooking up right now user?
Reloading thread
Gavin Barnes
Other urls found in this thread:
Daniel Morgan
I'm buying my first 308 soon, and I'm trying to figure out what ammo I should order to harvest brass from after shooting. What would be better, federal or ppu? I don't want to deal with a military crimped primer if I can avoid it
Jaxson Reed
Definitely avoid milsurp then. Its been a bit annoying for me to swage out the primer pockets on my m80 brass
PPU brass is very good, sellier and bellot 308 is very consistent and accurate. I wish there was a real fucking NATO version of wolf gold.
Speaking of 308, anybody got a line on m80 ball projectiles?
Noah Anderson
M80a1 projectiles*
Jayden Diaz
I think I'm gonna get a 300 blackout just because of all the possibilities for reloading
David King
Xavier James
Hit kk
Robert Robinson
I'm cooking something up alright
Thomas Kelly
>I think I'm gonna get a 300 blackout
post your results if you're able to make effective subsonic hunting ammo.
My results were poor with S&B 200 grain. No tumbling, certainly no expansion.
Jack Hernandez
Wat?
Asher Rivera
Also interested in M80a1 boolets, plz.
Jeremiah Wilson
yea
Elijah Reyes
People have swaged brass into projectiles for decades. He's done something... similar.
Luke Rivera
Are there any concerns I should have about buying used smokeless powder? A local auction has a few lots of half-used cans.
Michael Nelson
hahaha burn motherfucker burn
wouldn't it just tumble?
I want to fire these from a break action
Cooper Nelson
La creatura...
James Morris
At subsonic speeds 300 blk fmj is worse then 45 acp. Same weight at the same speed with less caliber.
I'd use some sort of fancy Lehigh copper round designed to expand at subsonic speeds
Caleb Bell
If they are really old be wary, make sure to start your reloads on the low end of things because the powder burn rates may have changed.
Landon Evans
Penetration test of some recent reloads.
Target is a 3/8" thick AR500 plate, dunno what the rating is, it just says "rifle rated", I'm guessing level III+ or level IV
Hand loads are .30-06, 55 grains of IMR 4831, and 165 grain tungsten carbide core bullets.
Unfortunately the tungsten carbide cores are a little small, so they sometimes tumble if they're not centered correctly
Matthew Sanders
Colton Wilson
Charles Thomas
And here's a round that tumbled, as well as regular .30-06 round
Parker Baker
You'd probably be better off shooting whatever you're shooting at with a high draw crossbow. When you start designing your bullets to work like mechanical broadheads and cause bleeding instead of hydrostatic shock because your bullets are so slow you have officially jumped the shark.
Jayden Bailey
Elijah Williams
Please link the carbide bullets friend
Daniel Perry
Just made 50 rounds of 44 mag yesterday for a total of 100, cant wait to shoot them out on saturday.
Nathan Phillips
Sweet! Wheres you get your bullets? I just bought some 44 magnum reloading dies today
Nicholas Green
They're a custom order
Noah Gonzalez
what is that round on the left
Easton Green
Show me a crossbow with a 60 round mag retard
Chase Thompson
I guess I could find a company to make me some if I looked long enough. But most companies willing to make tungsten rods are chinese, so....
Caleb Hernandez
Lehigh subsonic round, controlled fracturing I believe.
Luke Robinson
Does anyone have any reloading data handy for 7.62x54r? The Hornady book is based off .308 projectiles in a 91/30 barrel which sure as shit ain't gonna be .308
My other book used .308 projectiles too.
I've been getting underpressure signs from minimum and slightly above loads
Camden Clark
Any high velocity, low weight loads for 45 colt, 460 rowland, or 44 rem mag?
Austin Baker
Check out vihtavuoris phone app / website
Jace Phillips
Where do you guys source 64 or 77 grain .223 projectiles?
Joshua Peterson
distance? velocity on impact? are you getting any kind of accuracy on them?
Logan Clark
86gr round nose 30-06 for the ol m1.
>beautiful perfect round holed for paper hunting
Noah Long
Soon!
Chase Diaz
At the gun show.
Evan Ortiz
Working on fireforming some 7-30 Waters right now
Jayden Sullivan
Just how strong is a modern production 1885 highwall? What are the upper limits I can safely load 45-70 too in it?
Henry Taylor
Low 3000 ft lb area
Hudson Robinson
What are these good for?
Wyatt Gutierrez
Friends. I'm gonna be stocking up on a LOT of powder before the election, what's the best website to go to for this?
I'm hoping to pick up like 60 lbs during the labor day sales
Jordan Turner
Powder valley for buying in bulk is unbeatable
Caleb Turner
Carter Hall
shit in a bucket and make some fertilizer
Nolan Lewis
Ok ted
Benjamin Richardson
Does anybody have technical data for 7.62 SLAP?
I measured the angle of the oenetetrators tip to be 30 degrees. I need to know its length, caliber, and mass.
Powder charge would be helpful too.