What's a decent handguard system that cannot result in pic related.
Handguard system
William Taylor
Jason Parker
Did you use red loctite, retard?
Noah Gonzalez
No just regular tarded it up
Hudson Howard
Put it in the freezer. Steel bolt will shrink, and alu will stay put. Then try prying it off.
Isaiah Rogers
Its a screw big brain, wont that destroy the threads on the inside
Logan Miller
not him. but the idea is that the bolt will shrink and be small enough to clear the threads. but i doubt that will work. if i was op, I'd go to a hardware store and buy a tap and die set. drill the screw out, re tap the hole the next size up, buy a new screw with the same thread pitch you taped for.
Caleb Parker
Now thats a big brain
Julian Watson
hexalobular screws retards
Nathaniel Perry
You could use a file to cut flats on either side of the screw head, put some penetrating oil on the thread, let it sit for about 15 minutes, then take a pair of lockjaw pliers and use them on the flats you cut into the screw head to slowly loosen the screw. If it works you won't have to drill or tap the rail and you'll just need to get another screw of the same size, if it doesn't then you'll have to tap and drill it anyway.
Isaac Sanders
Not looking for suggestions to get the screw out. I want a recomendation for a new handguard system